Brake Misc / Other

288mm Alcon Discs and Seriously Lotus Fully Floating Bells

A pair of very special, high quality Alcon 288mm Brake Discs and fully floating Seriously Lotus bells including fixing bolts.

These Floating bells where originally designed by the brilliant engineers at Nitron.
We have secured the design from Nitron and have them manufactured in exacxtly the same materials to the same specification as the originals.

These discs and bells are for rear fitment only and must use the original single piston / hand brake caliper.
These 288 discs will not fit if using a front 2 pot caliper on the rear.

Please call should you need further advice and information Learn More

308mm Alcon Discs and Seriously Lotus Fully Floating Bells

A pair of very special, high quality Alcon 308mm Brake Discs and fully floating Seriously Lotus bells including fixing bolts.

These Floating bells where originally designed by the brilliant engineers at Nitron.
We have secured the design from Nitron and have them manufactured in exacxtly the same materials to the same specification as the originals.

Although designed to be used with a 4 pot racing caliper, This kit can be used with the standard Lotus 2 pot caliper utilising spacers for the caliper.

A caliper spacer kit is available to allow fitment using the standard 2 pot calipers Learn More

308mm brake upgrade kit.
This upgrade consists of the following components:-
2 x Alloy four pot calipers with 31.8mm pistons.
2 x Alloy disc bells.
2 x 308mm curved vane, grooved and vented discs.
2 x Caliper mounting brackets.
2 x front brake hoses.
1 x set of front brake pads. (Ferodo 2500)(most other compounds available)

All nuts bolts and washers to assemble discs and bells
All nuts bolts and washers to mount calipers and brackets.


Developed and manufactured by Caparo AP Braking, the company that brought us the Caparo T1 Hyper car.This kit is a direct bolt on replacement for all S2 Elise and Exige variants.

Designed to fit within the standard 16in wheel, and compatible with the cars braking systems including ABS.

But is especially suited to S2 Elise owners who require a big brake upgrade but wish to retain the standard front wheels. (This is currently the ONLY big brake kit with 308mm discs and 4 pot calipers that will fit inside the small standard S2 front wheel)


An Ideal upgrade for fast road and track day useage.

In our opinion one of the most cost effective and complete braking upgrade solutions available!

Please ontact us before ordering, these brake kits are very very popular and we are awaiting the next batch arriving!!!

Learn More

AP Racing / Lotus 4 Pot Caliper Upgrade Kit S2.
An ideal upgrade kit for anyone wishing to upgrade there original front two pot calipers. (Only suitable for 308 mm discs)
Included in the kit are
2 x 4 pot AP Racing calipers (Left and Right)
1 x Set front brake pads (Lotus fast road - Ferodo 2500)
4 x Caliper mounting bolts
2 x Braided brake hoses.
These caliper are a direct fit to all S2 (Elise & Exige), Europa (2006<) and VX220.
The calipers in this kit use the very popular Lotus/AP Racing pad shape so different pad materials are readliy available.
THESE CALIPERS MUST USE A 308MM DISC
This caliper upgrade kit can also be used by those wishing to upgrade from AP 295 Discs and two pot calipers by adding our 308mm alcon discs.
Our 308mm Alcons have the same bolt fixing pattern as the AP 295 discs, so very easy to upgrade with out the need to buy new bells!! Learn More

AP Racing Brake Bias Valve

Fits into the rear brake line (single circuit) to allow fine adjustemnt of the brake balance.
AP Racing part number CP3550-14 Brake proportioning valve

Also available for twin circuit systems, please contact us for details.

Learn More

AP Racing Disc/Bell Mounting Bolt Kit

Each kit contains 12 Bolts 12 Nuts and 24 washers. Enough to replace the fixings on one Dics and Bell with 12 fixings.
Two kits needed for each pair of discs. (Two kits for the front discs or two kits for the rear discs)

Learn More

A pair of Braided Brake Hoses for AP 4 Pot Caliper

As fitted by Lotus to all cars with 4 pot AP racing front calipers

Learn More

Counter sunk screw to secure the brake disc to the hub.
M6x16

As these screws are purely for alignment purposes (They keep the disc aligned to aid wheel bolt fitting when changing a wheel), they are made from stainless steel. This helps to stop the screw becoming siezed. Learn More

Genuine Lotus Dot 4 Brake Fluid, as supplied in your car from the factory.
500ml bottle of Lotus Dot 4 brake fluid. Learn More