Braking

A pair of Alcon race quality 288mm Rear Brake Disc rota's with Nitron Fixed bells

These 288mm Alcon brake discs are the very best thats available, with 'c' shaped grooves for improved performance and increased pad life.

These discs really are the ultimate brake disc available for your the rear of your Lotus Elise, Exige or 211.

Supplied with the correct strength AP nuts, bolts and washers as well as the fixed bells that have be specificaly designed and produced by the engineers at Nitron.

These brake disc rota's are the lightest available for the rear of an S2.
Even when assembled with the fixed bells they are still only 4.2kgs (A standard S2 Lotus disc is 5.9kgs)
This gives a weight saving for each rear disc of 1.7 kgs or a total of 3.4 kgs.

We designed these with the intention of reducing the weight and not having a rusty area of disc surface that is not swept by the brake pad.

These discs are also avialable with Nitron Fully Floating bells Learn More

A pair of AP Racing 295mm Brake Disc rota's with Nitron Fixed bells

These discs are fantastic upgrade to the brakes on your Lotus

Supplied with fixed bells that have be specifically designed and produced by the engineers at Nitron.

These discs are also available with Nitron Fully Floating bells Learn More

A pair of Alcon race quality 308mm Brake Disc rota's with Nitron Fixed bells

These 308mm Alcon brake discs are the very best thats available, with 'c' shaped grooves for improved performance and increased pad life.

These discs really are the ultimate brake disc available for your Lotus

Supplied with the correct strength AP Racing bolts, nuts and washers as well as the fixed bells that have be specificaly designed and produced by the engineers at Nitron.

These brake disc rota's are very light at 4.5kgs each. Even when assembled with the fixed bells they are still only 5.3kgs (A standard S2 288mm Lotus disc is 5.9kgs)

A caliper spacer kit is also available to allow fitment to cars with the standard 2 pot calipers


These discs are also avialable with Nitron Fully Floating bells Learn More

288mm Alcon Discs and Seriously Lotus Fully Floating Bells

A pair of very special, high quality Alcon 288mm Brake Discs and fully floating Seriously Lotus bells including fixing bolts.

These Floating bells where originally designed by the brilliant engineers at Nitron.
We have secured the design from Nitron and have them manufactured in exacxtly the same materials to the same specification as the originals.

These discs and bells are for rear fitment only and must use the original single piston / hand brake caliper.
These 288 discs will not fit if using a front 2 pot caliper on the rear.

Please call should you need further advice and information Learn More

295mm AP Racing brake discs with 12 disc mounting holes with a PCD of 177.8mm
290 mm AP Racing brake discs with 8 disc mounting holes with a PCD of 165.1mm


Learn More

304mm AP Racing brake discs with a disc mounting hole PCD of 177.8mm

Learn More

A pair of handed 308mm Alcon brake disc rotas with a mount hole pcd of 177.8mm.

These very special handed brake rota's are currently only available from us!

The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use.

These brake disc rota's are very light at 4.5kgs each. Even when assembled with the fixed bells they are still only 5.3kgs (A standard S2 Lotus disc is 5.9kgs)




Learn More

308mm Alcon Discs and Seriously Lotus Fully Floating Bells

A pair of very special, high quality Alcon 308mm Brake Discs and fully floating Seriously Lotus bells including fixing bolts.

These Floating bells where originally designed by the brilliant engineers at Nitron.
We have secured the design from Nitron and have them manufactured in exacxtly the same materials to the same specification as the originals.

Although designed to be used with a 4 pot racing caliper, This kit can be used with the standard Lotus 2 pot caliper utilising spacers for the caliper.

A caliper spacer kit is available to allow fitment using the standard 2 pot calipers Learn More

308mm brake upgrade kit.
This upgrade consists of the following components:-
2 x Alloy four pot calipers with 31.8mm pistons.
2 x Alloy disc bells.
2 x 308mm curved vane, grooved and vented discs.
2 x Caliper mounting brackets.
2 x front brake hoses.
1 x set of front brake pads. (Ferodo 2500)(most other compounds available)

All nuts bolts and washers to assemble discs and bells
All nuts bolts and washers to mount calipers and brackets.


Developed and manufactured by Caparo AP Braking, the company that brought us the Caparo T1 Hyper car.This kit is a direct bolt on replacement for all S2 Elise and Exige variants.

Designed to fit within the standard 16in wheel, and compatible with the cars braking systems including ABS.

But is especially suited to S2 Elise owners who require a big brake upgrade but wish to retain the standard front wheels. (This is currently the ONLY big brake kit with 308mm discs and 4 pot calipers that will fit inside the small standard S2 front wheel)


An Ideal upgrade for fast road and track day useage.

In our opinion one of the most cost effective and complete braking upgrade solutions available!

Please ontact us before ordering, these brake kits are very very popular and we are awaiting the next batch arriving!!!

Learn More