Brake Discs

A pair of Alcon race quality 288mm Rear Brake Disc rota's with Fixed alloy bells These 288mm Alcon brake discs are the very best thats available, with 'c' shaped grooves for improved performance and increased pad life. These discs really are the ultimate brake disc available for your the rear of your Lotus Elise, Exige or 211. Supplied with the correct strength AP nuts, bolts and washers as well as the fixed bells that have be specificaly designed for use on the S2 Elise and Exige These brake disc rota's are the lightest available for the rear of an S2. Even when assembled with the fixed bells they are still only 4.2kgs (A standard S2 Lotus disc is 5.9kgs) This gives a weight saving for each rear disc of 1.7 kgs or a total of 3.4 kgs. These discs and bells are for rear fitment only and must use the original single piston / hand brake caliper. These 288 discs will not fit if using a front 2 pot caliper on the rear We designed these with the intention of reducing the weight and not having a rusty area of disc surface that is not swept by the brake pad, These discs are also avialable with Nitron Fully Floating bells Learn More

A pair of Alcon race quality 295mm Brake Disc rota's with fixed alloy bells These 295mm Alcon brake discs are the very best thats available, with 'c' shaped grooves for improved performance and increased pad life. These discs really are the ultimate brake disc available for your Lotus Supplied with the correct strength AP Racing bolts, nuts and washers as well as the fixed bells These brake disc rota's are very light at 4.2kgs each. Even when assembled with the fixed bells they are still only 4.9kgs (A standard S2 288mm Lotus disc is 5.9kgs) These 295 Discs will not fit the rear of an otherwise standard car (Front only) Learn More

A pair of Alcon race quality 308mm Brake Disc rota's with fixed alloy bells These 308mm Alcon brake discs are the very best thats available, with 'c' shaped grooves for improved performance and increased pad life. These discs really are the ultimate brake disc available for your Lotus Supplied with the correct strength AP Racing bolts, nuts and washers as well as the fixed bells These brake disc rota's are very light at 4.5kgs each. Even when assembled with the fixed bells they are still only 5.3kgs (A standard S2 288mm Lotus disc is 5.9kgs) A caliper spacer kit is also available to allow fitment to cars with the standard 2 pot calipers These discs are also avialable with Nitron Fully Floating bells Learn More

A pair (2) of Alcon endurance quality 315mm Brake Disc rota's with Floating bells and anti rattle clips These 315mm Alcon brake discs have 'c' shaped grooves for improved performance and increased pad life. These discs really are our ultimate brake disc available for your Lotus Elise or Exige, 4 cylinder car (NOT S1) CANNOT BE USED WITH THE STANDARD 2 POT CALIPERS Supplied with the correct strength AP Racing bolts, nuts and washers as well as the floating bells, Titanium bobbins and stainless anti-rattle springs. Learn More

A pair of handed 288mm Alcon brake disc rotas with a mount hole pcd of 177.8mm. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. These brake disc rota's are very light at 3.9kgs each. Even when assembled with the fixed bells they are still only 4.2kgs (A standard S2 Lotus disc is 5.9kgs) Will only fit on the rear of an S2 Learn More

288mm Alcon Discs and Seriously Lotus Fully Floating Bells A pair of very special, high quality Alcon 288mm Brake Discs and fully floating Seriously Lotus bells including fixing bolts. These Floating bells where originally designed by the brilliant engineers at Nitron. We have secured the design from Nitron and have them manufactured in exacxtly the same materials to the same specification as the originals. These discs and bells are for rear fitment only and must use the original single piston / hand brake caliper. These 288 discs will not fit if using a front 2 pot caliper on the rear Please call should you need further advice and information Learn More

A pair of handed 295mm Alcon brake disc rotas with a mount hole pcd of 177.8mm. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. These brake disc rota's are very light at 4.2kgs each. Even when assembled too fixed bells they are still only 4.9kgs (A standard S2 Lotus disc is 5.9kgs) Learn More

295mm AP Racing brake discs with 12 disc mounting holes with a PCD of 177.8mm Special order NON STOCKED parts Learn More

A pair of handed 308mm Alcon brake disc rotas with a mount hole pcd of 177.8mm. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. These brake disc rota's are very light at 4.5kgs each. Even when assembled with the fixed bells they are still only 5.3kgs (A standard S2 Lotus disc is 5.9kgs) Learn More

308mm Alcon Discs and Seriously Lotus Fully Floating Bells A pair of very special, high quality Alcon 308mm Brake Discs and fully floating Seriously Lotus bells including fixing bolts. These Floating bells where originally designed by the brilliant engineers at Nitron. We have secured the design from Nitron and have them manufactured in exacxtly the same materials to the same specification as the originals. Although designed to be used with a 4 pot racing caliper, This kit can be used with the standard Lotus 2 pot caliper utilising spacers for the caliper. A caliper spacer kit is available to allow fitment using the standard 2 pot calipers Learn More

308mm one piece S2 Brake discs. These 308mm brake discs have curved vanes which are handed left and right to ensure balanced cooling accross both sides of the car, unlike the original 288mm discs which use one casting and have curved vanes all in the same direction. This leads to one side of the cars brakes being cooled better than the other!!! Many of the aftermarket discs that are available also use one casting with vanes which are in one direction only! Then they have grooves or holes put onto the disc to make them handed. These discs use handed castings and should not be confused with other products on the market. These discs are as used on the Europa SE and 2010 Exige with the factory fitted fast road brake kit!! Could be used as part of a front brake upgrade on a standard S2 VX220 or Europa, using the standard 2 pot calipers, spacers and the correct length caliper retaining bolts Diameter = 308mm Thickness = 26mm Braking surface = Drilled Disc type = Vented Vanes = Curved, handed left and right Learn More

A pair of handed 315mm Alcon brake disc rotas with a mount hole pcd of 190.5mm. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the alloy bells supplied by Lotus on S2 cars with alloy belled discs (190.5 PCD) Supplied as a pair of discs Learn More

A pair of replacement AP Racing 308mm Grooved Brake Disc Rota's 308mm x 26mm brake discs with a mounting PCD of 190.5mm These discs are an AP Racing direct replacement for cars fitted with the AP Racing/ Lotus supplied big brake kit. Also available drilled please contact us for price and delivery lead time Bell shown for illustration purposes only. Learn More

A pair of Alcon 350mm brakes discs with separate bell / hand brake bell for the Evora 400 series cars These high grade discs are a direct replacement for both standard two piece disc as fitted to the 400, 410 and 430 models The bell is also produced by Alcon and is Xylan coated for corrosion protection A pair of Lotus supplied two piece rear discs is currently over £1700 + vat for the drilled version and £1890 for the J Hook version Learn More

A pair of Alcon 370mm x 32mm brakes discs and alloy bells to fit the Evora 400 series cars 400/410/430. These high grade discs are a direct replacement for standard two piece disc as fitted to all models of the Evora 400 range Supplied as a pair pre assembled and ready to install. Learn More

A pair of handed 332mm X 32mm Alcon Front brake disc rotas with a mounting holes to suit the Exige V6 with alloy bells. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the front brake bells supplied by Lotus on the V6 Exige with alloy belled discs Supplied as a pair of discs (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota Learn More

Exige V6 332mm Alcon Front disc with Floating Bells These floating brake discs are a direct replacement for the standard 332mm front disc on the Exige V6. Each fit contains the following parts 2 x 332 x 32mm Alcon discs 2 x Floating bells 24 x titanium drive bobbins 24 x nut/bolt fittings 12 x disc anti rattle clips. The anti rattle clips stop the 'clatter' usually found with floating bells Priced and sols as a pair of discs Learn More

A pair of handed 332mm Alcon Rear brake disc rotas with a mounting holes to suit the Exige V6 with 2 piece rear discs These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the rear brake bells supplied by Lotus on the V6 Exige with 2 piece discs Supplied as a pair of disc rota's (No bells) (Lotus supplied discs are only available from lotus as a pair of complete disc / bell assembly) Direct replacement for the Lotus supplied disc rota Learn More

Exige V6 343mm Alcon Front disc with Floating Bells These floating 343mm brake discs are a direct replacement for the standard 332mm front disc on the Exige V6. Each fit contains the following parts 2 x 343 x 32mm Alcon discs 2 x Floating bells 24 x titanium drive bobbins 24 x nut/bolt fittings 12 x disc anti rattle clips. 4 x caliper spacers The anti rattle clips stop the 'clatter' usually found with floating bells Priced and sold as a pair of discs Learn More

A pair of Alcon 343mm brakes discs with separate bell / hand brake bell for the superb Exige V6. (Will fit all V6 Exige models) These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the rear of the Cup and LF1 models The bell is also produced by Alcon and is Zylan coated for corrosion protection One Lotus supplied two piece rear disc is currently £822.89 + vat.....(Almost £1975.00 per pair) Due to the larger disc area these should be used with the larger front brake pads (They will work with standard size rear pads but this is not recommended) Learn More

A pair of handed 343mm X 32mm Alcon Front brake disc rotas with a mounting holes to suit the Exige V6 with alloy bells. These very special Upgraded brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the front brake bells supplied by Lotus on the V6 Exige with alloy belled discs Supplied as a pair of discs (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota Learn More

A pair of handed 343mm Alcon Rear brake disc rotas with a mounting holes to suit the Exige V6 with 2 piece rear discs These very special Upgraded Big brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the reart brake bells supplied by Lotus on the V6 Exige with 2 piece discs Supplied as a pair of disc rota's (No bells) (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota These new rear discs have a larger swept area than the standard disc and use the Exige and Evora front brake pad Learn More

A pair of Alcon 332mm brakes discs with separate bell / hand brake bell for the superb Exige V6. (Will fit all V6 Exige models) These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the rear of the Cup and LF1 models The bell is also produced by Alcon and is Xylan coated for corrosion protection One Lotus supplied two piece rear disc is currently £822.89 + vat.....(Almost £1975.00 per pair) Learn More

A pair of Alcon 332mm brakes discs and anodised alloy bells to fit the Exige V6. These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the Cup, LF1, 410 and 430 models (A pair of two piece discs from lotus are over £1695 + vat!!!!) Learn More