3Eleven

2019 Lotus Wheel Centre Cap For Forged Wheels (Black and Silver) Lotus wheel centre cap for the forged Team dynamics prorace 1.4, Emira, 2010 cup 260 wheels, 240R 5 spoke wheels and Lotus supplied V6 Exige wheels (Not for TD wheels) Lotus part number 889135066905S Sold individually (Four needed for a complete car set) Learn More

2019 Lotus Wheel Centre Cap For Forged Wheels (Yellow and Green) Lotus wheel centre cap for the forged Team dynamics prorace 1.4, Emira, 2010 cup 260 wheels, 240R 5 spoke wheels and Lotus supplied V6 Exige wheels (Not for TD wheels) Sold individually (Four needed for a complete car set) Learn More

4** Series Clutch Kit A142Q0009S Genuine Lotus supplied clutch kit (Will only fit cars with the 400 series Flywheel) Learn More

Brake Light Switch ( All cars with Electronic Throttle) These are the original equipment switch as supplied by Lotus Lotus part number A116J6034F Fits 2-11, 3Eleven, Exige V6 (All models), Evora (All Models inc 400 series), Elise S2 and S3, Exige S2 Learn More

Caliper Bleed Screw - all Lotus 4 piston AP calipers 2 Caliper bleed screws (Bleed nipples) M10 X 1.0 X 30mm, suits all S2 Elise/Exige with the Lotus AP 4 piston caliper fitted to the front, all Evora's, all V6 Exige's and 3-11's One kit comprises 2 bleed screws, seals and caps. Learn More

Duralac corrosion inhibiting compound. Used to reduce corrosion between dissimilar metal contact areas on the Lotus. This will remain liquid if kept sealed tight in it's tin, it will form a skin over the top surface, but liquid underneath. 250ml tin. Learn More

These spacers are designed to work with the OEM Air Bag Steering Wheel to bring the steering wheel 30mm closer to the driver. This 30mm spacers fits between the steering wheel and original steering wheel boss. Supplied with four new mounting bolts. MOTORSPORT PARTS. Track use only (Not for road use) Learn More

Emira Front Brake Pads Pagid RS29 (Yellow) Also know as Pagid 'Yellow' Learn More

Emira Rear Brake Pads Pagid RS29 (Yellow) Also know as Pagid 'Yellow' Learn More

Evora 400 Front Brake Pads Pagid RS29 (Yellow) Also know as Pagid 'Yellow' Learn More

Evora 400 Rear Brake Pads Pagid RS29 (Yellow) Also know as Pagid 'Yellow' Learn More

Evora 400 Series RC5+ Carbone Lorraine Rear Brake pads Learn More

Evora and Exige Polyurethane V6 Ant- Roll Bar Bushes A pair of up rated polyurethane anti-roll bar bushes (Powerflex) Available in two shore ratings:- Purple 80A shore rating (Road use/Trackdays) Black 95A shore rating (Trackday/Race) Supplies as a pair (one anti-roll bar kit) Learn More

Evora Hand Brake Cable (All Models) Lotus part number E132J0005F 2 Cable required per car (LH and RH) Learn More

Evora And Exige Wheel Bearing (Hub) Wheel bearing/Hub assembly for Evora (All models) Front and Rear, Exige V6 Rear Lotus part number A132D0021F Learn More

Exige And Evora 400 Series Oil Cooler A132K0304F Also 2018 onwards Exige 350 Learn More

Exige V6 & Evora Handbrake Assembly C132J0145F Genuine Lotus supplied part Two required per car, this assembly is for one side, includes the back plate, brake shoes. retaining clips, springs etc Learn More

Exige V6 332mm Alcon Brake Kit Consisting of :- 2 x 332mm x 32mm Front brake disc rota's 2 x Floating bell kits (Front) Including titanium bobbins, anti-rattle clips, nuts and bolts 2 x 332mm x 26mm Rear brake disc rota's 2 x Rear brake bells including nuts and bolts Brake pads as an option Ferodo 2500 Pagid RS29 Performance friction The front discs are assembled with fully floating bells and are also fitted with anti rattle clips. (Also available with a fixed bell-see options below) To stop the noises usually associated with floating bells we supply the kit with the anti-rattle clips as shown. Learn More

A pair of handed 332mm X 32mm Alcon Front brake disc rotas with a mounting holes to suit the Exige V6 with alloy bells. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the front brake bells supplied by Lotus on the V6 Exige with alloy belled discs Supplied as a pair of discs (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota Learn More

Exige V6 332mm Alcon Front disc with Floating Bells These floating brake discs are a direct replacement for the standard 332mm front disc on the Exige V6. Each fit contains the following parts 2 x 332 x 32mm Alcon discs 2 x Floating bells 24 x titanium drive bobbins 24 x nut/bolt fittings 12 x disc anti rattle clips. The anti rattle clips stop the 'clatter' usually found with floating bells Priced and sols as a pair of discs Learn More

A pair of handed 332mm Alcon Rear brake disc rotas with a mounting holes to suit the Exige V6 with 2 piece rear discs These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the rear brake bells supplied by Lotus on the V6 Exige with 2 piece discs Supplied as a pair of disc rota's (No bells) (Lotus supplied discs are only available from lotus as a pair of complete disc / bell assembly) Direct replacement for the Lotus supplied disc rota Learn More

Exige V6 343mm Alcon Front disc with Floating Bells These floating 343mm brake discs are a direct replacement for the standard 332mm front disc on the Exige V6. Each fit contains the following parts 2 x 343 x 32mm Alcon discs 2 x Floating bells 24 x titanium drive bobbins 24 x nut/bolt fittings 12 x disc anti rattle clips. 4 x caliper spacers The anti rattle clips stop the 'clatter' usually found with floating bells Priced and sold as a pair of discs Learn More

Exige V6 343mm Big Brake Kit Consisting of :- 2 x 343mm x 32mm Front brake disc rota's 2 x Floating bell kits (Front) Including titanium bobbins, anti-rattle clips, nuts and bolts 2 x 343mm x 26mm Rear brake disc rota's 2 x Rear brake bells including nuts and bolts 4 x stainless caliper spacers 2 sets of brake pads. (Same pads front and rear) The standard brake pads offered in this kit are the Ferodo 2500, optionally Performance friction pads are also available (see options below) The front discs are assembled with fully floating bells and are also fitted with anti rattle clips. It is our opinion that discs this large size should be installed with floating bells, To stop the noises usually associated with floating bells we supply the kit with the anti-rattle clips shown. The standard car uses slightly smaller brake pads in the rear, this kit uses the larger front brake pads in both the front and the rear!! Unlike some of the kits available that use the smaller rear pads in the both the front and rear Special attention to wheel weigh position is required on the front wheels with this brake kit Learn More

A pair of Alcon 343mm brakes discs with separate bell / hand brake bell for the superb Exige V6. (Will fit all V6 Exige models) These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the rear of the Cup and LF1 models The bell is also produced by Alcon and is Zylan coated for corrosion protection One Lotus supplied two piece rear disc is currently £822.89 + vat.....(Almost £1975.00 per pair) Due to the larger disc area these should be used with the larger front brake pads (They will work with standard size rear pads but this is not recommended) Learn More