Elise/Exige S1

Items 26 to 49 of 49 total

per page

Page:
  1. 1
  2. 2
  • Pagid RS14 (Black) Brake Pads (Standard Calipers)

    Pagid RS14 (Black) Brake Pads (Standard Calipers) Pagid Black is an ideal trackday / race pad, with good initial bite, excellant modulation and good fade resistance. Learn More
    Excl. Tax: £168.95 Incl. Tax: £202.74

  • Performance Friction Brake Pads Lotus Motorsport Caliper(4 pot)

    Performance Friction Brake Pads Lotus Motorsport Caliper To fit the 4 pot caliper as fitted/used by Lotus on the S1 motorsport cars (4 Pot calipers) 01 Compound Learn More
    Excl. Tax: £139.95 Incl. Tax: £167.94

  • Performance Friction Standard Front Brake Pads (2 pot)

    Performance Friction Standard Front Brake Pads (2 pot) To fit the standard front caliper on S1 and S2 Elise, Exige, 211, Europa, VX220 etc etc Learn More
    Excl. Tax: £157.95 Incl. Tax: £189.54

  • Pro-Alloy Extra Large Capacity Fuel Tank (60 Ltrs)

    Pro-Alloy large capacity anti surge fuel tank for all Elise ,Exige and VX220 derivatives Learn More
    Excl. Tax: £794.95 Incl. Tax: £953.94

  • Pro-Alloy Motorsport Filler Neck Assembly

    Pro-Alloy Motorsport Filler Neck Assembly High Quality "Aero" style flush filler assembly for the Lotus S1/ S2 /211 The series 1&2 Lotus Elise and derivatives (including 211 and Exige series 2) with both Toyota and Rover engines have a narrow filler neck due to fuel cap design. The original filler neck is also installed with an unleaded fuel flap. Both these elopements prevent the use of TUFF JUG dry break style fuel filling systems without the use of a narrow adaptor on the dispenser which limits the fuel flow and hinders the seating of the TUFF JUG into the filler neck assembly, increasing the possibility of fuel spillage. The Pro Alloy Motorsport Filler assembly is designed specifically with the 36 mm dia tuff jug in mind, it bolts directly into the original clam aperture without body mods*, and utilises the standard filler hose assembly without modification. The deeper alloy elbow on the back of our assembly allows the TUFF JUG nozzle to fully open, allowing greatly improved filling speeds and faster/safer pit stops! This assembly can also be fitted to road going /track day cars as a direct replacement for the Lotus item. Can be supplied with a locking or non locking filler cap. *For fitment to the the S1, holes need to be drilled to accept the mounting ring. This modification is recommended by the LOTRDC to improve safety during the refuelling process by shortening the time spent in the act of refuelling and improving the connection between the refuelling container and the vehicle. Available for S1 Elise/Exige, S2 Elise Exige and the Lotus 211 models Learn More

    Regular Price: £354.00

    Special Price Excl. Tax: £250.00 Incl. Tax: £300.00

  • Pro-Alloy Radiator Single Pass 45mm

    Pro-Alloy Radiator single Pass 45mm Learn More

    Regular Price: £522.00

    Special Price Excl. Tax: £375.00 Incl. Tax: £450.00

  • Redline MT90 Gear Oil

    Redline MT90 Gear Oil 0.946 ltr RED LINE MT-90 HIGH-PERFORMANCE GEAR OIL is a fully-synthetic ester-based lubricant designed for use in manual transmissions and front-wheel-drive transaxles. This shear-stable formula resists breakdown for extended periods and offers more consistent viscosity in warm and cold temperatures for less gear noise and improved shifting. This fluid is less slippery for improved synchronizer coefficient of friction and offers stronger film strength for better wear protection. 75W90 GL-4 gear oil (similar to SAE 5W40/10W40 engine oil viscosity) Popular in Nissan, Mazda, Mitsubishi, VW/Audi, Lotus Elise/Exige, Toyota Offers quicker shifts, perfect synchronizer coefficient of friction Safe for brass synchros, as it lacks the reactive sulfurs found in most GL-5 oils that cause damage High performance gear protection and longer synchro life Eliminates notchy shifting, even when cold Satisfies the gear oil viscosity requirements of 75W90, 80W90, 90 and motor oil viscosities of SAE 40, 10W40, and 15W40 Recommended for GL-1, GL-3, and GL-4 applications, as well as where most special synchromesh fluids are specified Learn More
    Excl. Tax: £23.95 Incl. Tax: £28.74

  • Removable Steering Wheel Kit (Non Air bag cars)

    The kit supplied includes the following parts Momo tuner steering wheel (320mm) B&G Quick release Steering wheel boss adapter for non airbag cars (uses the original steering wheel boss) (Horn ring to be used from original steering wheel) Momo horn push Optional Lotus horn push Early cars not designed with air bags (S1 and early S2 up to about 2007) Learn More
    Excl. Tax: £384.95 Incl. Tax: £461.94

  • S1 Brake Service Kit

    S1 Brake Service Kit 4 x 282mm steel brake discs made by OEM manufacturer Pagid 1 x set front brake pads (Pagid road pads) 1 x set rear brake pads (Pagid road pads) Learn More
    Excl. Tax: £219.95 Incl. Tax: £263.94

  • S1 Elise And Exige Fuel Pipe (Pump to Filter)

    S1 Elise And Exige Fuel Pipe (Pump to Filter) Direct replacement for the original pipe Comes complete with a new original equipment fuel filter and the correct bulkhead grommet replacement for A111L0038F which is no longer available from Lotus Learn More
    Excl. Tax: £99.95 Incl. Tax: £119.94

  • S1 Elise and Exige Fuel Pump Unit

    ELISE S1 HP FUEL PUMP UNIT Using the latest turbine architecture and a very high build quality this unit outperforms every other pump unit option for the S1 in every department.

    IMPORTANT INFORMATION - Please ensure all old fuel is drained and the tank flushed thoroughly. Stale fuel/ dirt / debris will damage the new pump and will invalidate the warranty.

    TRUE HP OUTPUT - This unit can support up to 400BHP at standard Lotus fuel rail pressures, importantly this is achieved through the turbine pump’s efficiency and NOT from a high power requirement, which can cause fuel heating issues in some installations.

    DUAL INPUT DESIGN - As per the original AC Delco design the pump can take fuel from either the canister or the tank directly unlike eductor driven pump units. This has several advantages: - Virtually instantaneous HP output recovery from fuel starvation caused by fuel swash. Immediate recovery of the reserve canister refill cycle from empty as the pump itself achieves this. By comparison to an eductor system, in this situation the eductor is stalled and cannot refill the canister.

    RAPID CANISTER REFILL - Even when supplying the entire pumps output to the engine the pump will still fill the canister from empty to full in about 6 seconds, less at higher fuel rail pressures and even quicker when the return fuel is added if not at full power. This is easily the fastest refill we have ever tested, as a reference the original OE pumps being around 12 seconds and the latest OE pump being about the same. It is also considerably quicker than eductor powered systems, which are much slower.

    LOW POWER DRAW At around 6-7A it uses about the same power as the OE pump despite the substantial difference in output.

    MODERN SENDER UNIT Latest sender design, not a wire wound rheostat. PLUG AND PLAY There is nothing to change on the car or recover from the old pump, the unit uses identical connectors for the fuel and electrics. A new tank seal is supplied and fitted.

    Learn More
    Excl. Tax: £235.00 Incl. Tax: £282.00

  • S1 Elise And Exige Fuel Tank and Pump Complete kit

    Pro-Alloy large capacity anti surge fuel tank kit for Elise and Exige S1

    IN STOCK READY TO SHIP NOW

    Features..

    48 ltr Pro-Alloy fuel tank Spitfire uprated S1 fuel pump, arm and seal Set of silicone filler and breather hoses with all stainless jubilee type clips Seriouslylotus fuel pipe and correct high torque filter

    Learn More
    Excl. Tax: £999.00 Incl. Tax: £1,198.80

  • S1 Elise/Exige Silicone Radiator Hose

    S1 Elise/Exige Silicone Radiator Hose Left and right hand main radiator hose to suit all models of S1 Elise/Exige - does not fit 340R Complete with bleed point in left hand hose Stainless steel hose clamps also available to suit Learn More
    Excl. Tax: £84.95 Incl. Tax: £101.94

  • S1 Elise/Exige/340R Wheel Hub Flange

    S1 Elise/Exige/340R Wheel Hub Flange Equivalent to lotus part number A111C6001F & A111C6021F Made in the UK by OEM supplier from forged EN24 Steel. Learn More
    Excl. Tax: £74.95 Incl. Tax: £89.94

  • S1 Toe Link Kit (Early Cars With Alloy Uprights, Double outer Bracket)

    Spitfire Engineering S1 Toe Link Kit (Early Cars With Alloy Uprights, Double outer Bracket) Learn More
    Excl. Tax: £539.95 Incl. Tax: £647.94

  • S1 Toe Link Kit (Late Cars With Steel Uprights)

    S1 Toe Link Kit (Late Cars With Steel Uprights) Learn More
    Excl. Tax: £339.95 Incl. Tax: £407.94

  • S1 Wheel Bearing (OEM Quality)

    S1 Wheel Bearing (OEM Quality) These aftermarket wheel bearing have the same specifications and dimensions as the original equipment bearing. They are Taper roller bearings as per the original expensive Timken bearing, but at a much more affordable price!! Learn More
    Excl. Tax: £23.50 Incl. Tax: £28.20

  • Schroth LOTUS II- 4pt asm (Twist Buckle release) Harness

    FIA Homologated 4-point belt with ASM. 3" shoulder belt, 2" lap belt pull-down Elise (S1, S2, 111R), Exige (S1, S2), 340R Exige V6 etc 4pt Harnesses are recommended for use with competition type seats which normally have slots in the seat backs to allow free passage of the harness. Certain high back, integrated headrest seats are not suitable for use with 4pt harnesses. Profi II (2" lap belt) in BLACK 4 point belt with wrap attachment 3” shoulder belts FE road style buckle ASM (anti sub) Right hand or Left hand SPECIAL ORDER Learn More
    Excl. Tax: £334.95 Incl. Tax: £401.94

  • Steering Arm / Top plinth Bolt Kit

    Steering Arm / Upper plinth Bolt Kit. On the S2 Elise and Exige, Lotus upgraded the bolts that are used in the Steering arms on the front suspension and the Top Ball Joint Plinths on the rear suspension from 8.8 to 10.9. This kit of 10.9 cap head bolts are a must for anyone driving there S2 on the circuit. (The S1 cars with alloy uprights use 8.8 grade bolts for the steering arms and top ball joints) 4 bolts for the two front steering arms 4 bolts for the two rear top ball joint plinths Learn More
    Excl. Tax: £13.95 Incl. Tax: £16.74 As low as: £10.74

  • Steering Wheel Adapter (Non Air Bag Cars)

    Steering Wheel Adaptor (Non Air Bag Cars) Adaptor boss to allow the fitment of quick release couplings and after market steering wheels to non Air Bag cars. Suits quick release couplings with 70mm x 6 PDC fitment Bolts directly to the original steering wheel boss. Learn More
    Excl. Tax: £39.95 Incl. Tax: £47.94

  • Steering Wheel Adaptor (Boss)

    Steering Wheel Adaptor (boss) as used on the Exige V6 Cup with a removable steering wheel. Will fit all cars with air bags (Also car with Airbags deleted from steering wheel) Can also be used on non air bag cars, without the need to use the original boss from the steering wheel Learn More
    Excl. Tax: £169.95 Incl. Tax: £203.94

  • Steering Wheel Quick Release coupling

    Steering Wheel Quick Release coupling Brown and Geeson quick release as used by Lotus an the fabulous Exige V6 Cup cars Utilising a 6x70mm & 6x74mm multi-drilled PCD bolt pattern allows the quick release system to be fitted to all steering wheels with a matching bolt pattern. Learn More
    Excl. Tax: £144.99 Incl. Tax: £173.99

  • Vehicle Riser Ramps

    Low Rise Vehicle Ramps are a great solution to a problem commonly faced by many Lotus owners and Race teams, They are ideal for use on lowered vehicles and race cars because the Low Rise Vehicle Ramps elevate the car an additional 70mm off the ground, allowing for easier and safer access for trolley jacks The Vehicle Ramps are produced from a durable black Polypropylene (PP) and have a combined weight loading capacity of 5000kg as a pair. The ramps are sold in pairs. Height: 70mm/80mm Width: 200mm Length: 700mm Weight: 4kg (per pair) Loading Capacity: 5000kg (per pair) Learn More
    Excl. Tax: £59.95 Incl. Tax: £71.94

  • Wheel Arch Liner Clip / Scrivet

    Wheel Arch Liner Clip / Scrivet. Learn More
    Excl. Tax: £4.95 Incl. Tax: £5.94 As low as: £0.48

Items 26 to 49 of 49 total

per page

Page:
  1. 1
  2. 2