Bushes and Bearings

Lotus suspension bushes and bearings. Original, genuine and Nitron Racing parts.

Items 1 to 25 of 29 total

per page

Page:
  1. 1
  2. 2
  • Wishbone Bush Assembly Lubricant

    Wishbone Bush Assembly Lubricant P-80 Emulsion is specifically formulated to provide a temporary lubrication for the installation of bushes etc The lubrication properties only work when the lubricant is wet. Learn More
    Excl. Tax: £4.95 Incl. Tax: £5.94

  • Suspension Refresh Nut and Bolt Kits

    1 Review(s)
    Full or part Nut and Bolt kits for your suspension. Available as either just the 14 suspension pivot piont bolts (the other two use the rear toe link joint) or the 8 damper mounting bolts. Also available as a full kit. Each kit has one nyloc nut and two washers for each bolt. Learn More
    Excl. Tax: £24.95 Incl. Tax: £29.94 As low as: £11.94

  • Suspension Refresh Kit

    1 Review(s)
    A suspension refresh kit consisting of 1x full set of Seriously Lotus wishbone bushes or Superpro bushes. Also available with an upgrade to Nitron inner bearings., 8x Suspension Ball Joints 2x Track Rod Ends (S1 or S2 = OEM) 2x Our own Antiroll bar drop links 1x Suspension bolt kit including damper bolts. All the main components required to carry out a suspension refresh. Learn More
    Excl. Tax: £359.95 Incl. Tax: £431.94

  • SuperPro Polyurethane Suspension Bushes

    SuperPro Polyurethane Suspension Bushes Suits all models and derivatives of Elise, Exige and VX220 A direct replacement for the factory rubber bushes fitted to the wishbones. Stiffer bushes enhance the handling characteristics of your Lotus by maintaining the same level of hardness irrespective of load in comparison to rubber. The resilience of SuperPro bushings allow them to return to their cast shape after compression allows better control of noise, vibration and hardness in a vehicle. The fine tolerances on the bushings provide better road handling, increased tyre life, more responsive steering, and longer service life of suspension components. The special design of these bushes results in reduced rotational friction Each Kit Contains 32 x Polyurethane bushes (Two in each bush location) 16 x Steel inserts 16 x castor washers Learn More
    Excl. Tax: £226.95 Incl. Tax: £272.34

  • SuperPro Polyurethane Anti Roll Bar Bushes

    SuperPro Polyurethane Anti Roll Bar Bushes Suits all models and derivatives of Elise, Exige and VX220 with Alloy ARB mountings and the 19mm Roll Bar A direct replacement for the factory soft rubber bushes fitted to the Anti Roll Bar mountings. Stiffer bushes enhance the handling characteristics of your Lotus by maintaining the same level of hardness irrespective of load in comparison to rubber. The resilience of SuperPro bushings allow them to return to their cast shape after compression allows better control of noise, vibration and hardness in a vehicle. The fine tolerances on the bushings provide better road handling, increased tyre life, more responsive steering, and longer service life of suspension components. Each Kit Contains 2 x Polyurethane bushes Learn More
    Excl. Tax: £26.00 Incl. Tax: £31.20

  • Steering Rack Phosphor Bronze Cups

    Two Phosphor Bronze Cups for the Aluminium Steering Rack. The Bronze cups are a direct replacement for the standard Nylon cup, which can fail in extreme cicumstance such as heavy track work with sticky tyres. Learn More
    Excl. Tax: £17.95 Incl. Tax: £21.54

  • Seriously Lotus Wishbone Bushes (Singles)

    Wishbone Bushes. Lotus supply three differant bushes for your wishbones, 4 short in the rear suspension lower arm front pivot (2 pairs) 2 Long in the front suspension upper arm rear pivot. (soft) 12 Long in the remaining pivots (standard hardness) Our bushes do not have the 'soft' bush as we found a slight improvement in the control of the cars geometry by fitting the slightly harder bush in all the pivot points.However we can supply the soft Lotus bush should it be required! Our bushes are ideal to repalce standard bushes or an upgrade, when the harshness of solid type bushes is not desireable! Learn More
    Excl. Tax: £10.95 Incl. Tax: £13.14

  • Seriously Lotus Wishbone Bush kit

    Wishbone Bush Kit. A complete wishbone bush kit consisting of 14 Long and 4 Short Seriously Lotus bushes. These bushes are a cost effective alternative to the expensive OE Lotus bushes. Lotus supply three differant bushes for your wishbones, 4 short in the rear suspension lower arm front pivot (2 pairs) 2 Long in the front suspension upper arm rear pivot. (soft) 12 Long in the remaining pivots (standard hardness) Fits all 4 cylinder Elise and Exige models as well as VX220 and Europa etc Our kit does NOT have the 'soft' bush as we found a slight improvement in the control of the cars geometry by fitting the slightly harder bush in all the pivot points. Our bushes are ideal to repalce standard bushes or an upgrade, when the harshness of solid type bushes is not desireable! Learn More
    Excl. Tax: £173.95 Incl. Tax: £208.74 As low as: £204.00

  • S3 Elise Hub / Wheel Bearing

    S3 Elise Hub / Wheel Bearing for cars with ABS. (Complete with speed sensor) High quality SFK bearing pack as used by lotus Same as Lotus part number A120D6009F Lotus price £118.00 + vat For cars with Bosch ABS system (All S3 Elise, also S2.5 2011 MY) Learn More
    Excl. Tax: £98.50 Incl. Tax: £118.20

  • Excl. Tax: £79.50 Incl. Tax: £95.40

  • S2 Hub / Wheel Bearing with speed sensor

    S2 Hub / Wheel Bearing for cars with ABS made by SKF (OEM) Cars with ABS braking use four of these bearings. S2 cars without ABS use one of these bearings on the L/H rear wheel as a speed sensor for the speedometer signal. same as Lotus part number A117D6005F Lotus price £105.96 Learn More
    Excl. Tax: £99.95 Incl. Tax: £119.94

  • S1 Wheel Bearing (TIMKEN)

    Lotus S1 Timken Wheel Bearing. Highest quality bearing for all models of S1 Elise and Exige. Each bearing is supplied with two of the correct Circlips (No drive shaft nut supplied) These bearings are produced by Timken, an OEM supplier of bearings Equivalent to Lotus part number A111C6002F Learn More
    Excl. Tax: £39.49 Incl. Tax: £47.39

  • S1 Wheel Bearing (OEM Quality)

    S1 Wheel Bearing (OEM Quality) These aftermarket wheel bearing have the same specifications and dimensions as the original equipment bearing. They are Taper roller bearings as per the original expensive Timken bearing, but at a much more affordable price!! Learn More
    Excl. Tax: £23.50 Incl. Tax: £28.20

  • S1 (Wheel Bearing) Circlip

    S1 (Wheel Bearing) Circlip One circlip, Two required per bearing Learn More
    Excl. Tax: £1.95 Incl. Tax: £2.34 As low as: £1.80

  • Rear Toe-link Outer Joint Late S1 & S2 <2003 A117D0074S

    Outer toe-link joint for later S1 with steel rear upright and S2 prior to 2003 Lotus part number A117D0074S (45mm M10x1.25 stud type joint) Also used on most N/A VX220's Learn More
    Excl. Tax: £29.95 Incl. Tax: £35.94

  • Rear Toe-link Outer Joint All Models 2003 Onwards A117D0089S

    Standard outer toe-link joint for all models of S2 from about 2003 onwards Lotus part number A117D0089S Taper seat type joint Also used on most Turbo VX220's Learn More
    Excl. Tax: £29.95 Incl. Tax: £35.94

  • Rear Toe-link Inner Joint All Models Without Cross Brace A117D0090S

    Standard toe-link inner joint.(non cross brace) as supplied for all models of 4cyl Elise & Exige without the factory cross brace kit. Also used on the VX220's, 340R etc Ball joint toe-link inboard LH thread 10.9 grade M10 X 1.25 - 65mm long Lotus part number A117D0090S Learn More
    Excl. Tax: £29.95 Incl. Tax: £35.94

  • Rear Toe-link Inner Joint (Genuine) Cross Brace Type

    Cross brace type toe-link inner joint as fitted to cars with the rear cross brace kit. LH thread (As used on S2 Exige models) Lotus part number B120D0036F Learn More
    Excl. Tax: £81.95 Incl. Tax: £98.34

  • Nitron Wishbone Inner Bearing Kit

    Nitron Wishbone Inner Bearing Kit Learn More
    Excl. Tax: £399.95 Incl. Tax: £479.94

  • Excl. Tax: £29.95 Incl. Tax: £35.94

  • Exige V6 Front Wheel Bearing

    S3 Exige V6 Front Hub / Wheel Bearing for cars with ABS. (Complete with speed sensor) High quality SFK bearing pack as used by lotus Same as Lotus part number A138D6000F Lotus price £138.00 + vat As used on all 3Eleven models Learn More
    Excl. Tax: £109.95 Incl. Tax: £131.94

  • Exige and Evora V6 Spherical Joint B132D6006H (Rear Suspension)

    Exige V6 Rear Suspension Spherical Joint B132D6006H Three joints used per side on Exige Two joints per side on Evora (Lower outer joint is the larger B132D6005H) Genuine OEM part Learn More
    Excl. Tax: £37.55 Incl. Tax: £45.06

  • Evora Wheel Bearing And Exige V6 Rear Wheel Bearing ( A132D0021F )

    Evora And Exige Wheel Bearing (Hub) Wheel bearing/Hub assembly for Evora (All models) Front and Rear, Exige V6 Rear Lotus part number A132D0021F Learn More
    Excl. Tax: £179.95 Incl. Tax: £215.94

  • Evora V6 Spherical Joint B132D6005H (Rear Suspension)

    Evora Rear Suspension Spherical Joint B132D6005H Genuine Lotus part Learn More
    Excl. Tax: £39.27 Incl. Tax: £47.12

  • Evora and Exige V6 Anti-Roll Bar Bushes

    Evora and Exige Polyurethane V6 Ant- Roll Bar Bushes A pair of up rated polyurethane anti-roll bar bushes (Powerflex) Available in two shore ratings:- Purple 80A shore rating (Road use/Trackdays) Black 95A shore rating (Trackday/Race) Supplies as a pair (one anti-roll bar kit) Learn More
    Excl. Tax: £29.90 Incl. Tax: £35.88

Items 1 to 25 of 29 total

per page

Page:
  1. 1
  2. 2