You have no items in your shopping cart.
Suspension
Seriously Lotus supply genuine, original and Nitron Racing Lotus components. We are an authorised stockist and supplier of Nitron Racing NTR suspension systems.
-
Wishbone Bush Assembly Lubricant
Wishbone Bush Assembly Lubricant P-80 Emulsion is specifically formulated to provide a temporary lubrication for the installation of bushes etc The lubrication properties only work when the lubricant is wet. Learn MoreExcl. Tax: £4.95 Incl. Tax: £5.94 -
VX220 Toe Link Kit (Tapered Uprights)
VX220 Toe Link Kit (Tapered Uprights) Learn MoreExcl. Tax: £339.95 Incl. Tax: £407.94 -
VX220 Toe Link Kit (Earlier Cars With Parallel Uprights)
VX220 Toe Link Kit (Earlier Cars With Parallel Uprights) Learn MoreExcl. Tax: £339.95 Incl. Tax: £407.94 -
V6 Exige Rear Anti Roll Bar Drop Link
V6 Exige Rear Anti Roll Bar Drop Link The rear drop inks on the V6 Exige are different right and left. Please specify which one is required from the options to the left A132D4009F/A132D4010F Plus option to add 2 locknuts per drop link - these tend to be seized and need to be cut off Learn MoreExcl. Tax: £25.60 Incl. Tax: £30.72 -
Suspension Refresh Nut and Bolt Kits
Full or part Nut and Bolt kits for your suspension. Available as either just the 14 suspension pivot piont bolts (the other two use the rear toe link joint) or the 8 damper mounting bolts. Also available as a full kit. Each kit has one nyloc nut and two washers for each bolt. Learn More -
Suspension Refresh Kit
A suspension refresh kit consisting of 1x full set of Seriously Lotus wishbone bushes or Superpro bushes. Also available with an upgrade to Nitron inner bearings., 8x Suspension Ball Joints 2x Track Rod Ends (S1 or S2 = OEM) 2x Our own Antiroll bar drop links 1x Suspension bolt kit including damper bolts. All the main components required to carry out a suspension refresh. Learn MoreExcl. Tax: £359.95 Incl. Tax: £431.94 -
Steering Arm / Top plinth Bolt Kit
Steering Arm / Upper plinth Bolt Kit. On the S2 Elise and Exige, Lotus upgraded the bolts that are used in the Steering arms on the front suspension and the Top Ball Joint Plinths on the rear suspension from 8.8 to 10.9. This kit of 10.9 cap head bolts are a must for anyone driving there S2 on the circuit. (The S1 cars with alloy uprights use 8.8 grade bolts for the steering arms and top ball joints) 4 bolts for the two front steering arms 4 bolts for the two rear top ball joint plinths Learn More -
Seriously Lotus Wishbone Bushes (Singles)
Wishbone Bushes. Lotus supply three differant bushes for your wishbones, 4 short in the rear suspension lower arm front pivot (2 pairs) 2 Long in the front suspension upper arm rear pivot. (soft) 12 Long in the remaining pivots (standard hardness) Our bushes do not have the 'soft' bush as we found a slight improvement in the control of the cars geometry by fitting the slightly harder bush in all the pivot points.However we can supply the soft Lotus bush should it be required! Our bushes are ideal to repalce standard bushes or an upgrade, when the harshness of solid type bushes is not desireable! Learn MoreExcl. Tax: £10.95 Incl. Tax: £13.14 -
Seriously Lotus Wishbone Bush kit
Wishbone Bush Kit. A complete wishbone bush kit consisting of 14 Long and 4 Short Seriously Lotus bushes. These bushes are a cost effective alternative to the expensive OE Lotus bushes. Lotus supply three differant bushes for your wishbones, 4 short in the rear suspension lower arm front pivot (2 pairs) 2 Long in the front suspension upper arm rear pivot. (soft) 12 Long in the remaining pivots (standard hardness) Fits all 4 cylinder Elise and Exige models as well as VX220 and Europa etc Our kit does NOT have the 'soft' bush as we found a slight improvement in the control of the cars geometry by fitting the slightly harder bush in all the pivot points. Our bushes are ideal to repalce standard bushes or an upgrade, when the harshness of solid type bushes is not desireable! Learn More -
Seriously Lotus Shear Panel (will fit with our Pro-Sump)
Applications - All S2 (Toyota) Elise/Exige/2-Eleven (Not 2010 cup cars) This Seriously Lotus Shear Panel has been designed to fit with the larger capacity baffled Pro-sump. (Will also fit with the standard sump) It reduces longitudinal and lateral compliance of the rear suspension, increasing lateral hub stiffness and tyre contact patch stiffness, therefore maximising vehicle potential on the circuit. Including the fitting kit this shear panel weighs an incredible 0.8kg 210mm wide, 590mm long with 20mm sides This shear panel fits underneath the engine/gearbox and connects the chassis and rear of the subframe. Simple bolt on modification for those who enjoy circuit driving. For those with the Lotus shear panel already fitted that wish to upgrade to a Pro-sump, then this is an ideal modification. Simply remove the Lotus Shear Panel and replace with this Seriously Lotus version. (It used 6 of the 8 mounting points used by Lotus),. We have designed this panel so that it is fully interchangeable with the Lotus Shear Panel but allowing the fitment of our baffled sump (a must for circuit use) A significant added benefit of this panel is the fact that when changing the oil filter this panel does not need to be removed/ cleaned due to spilt oil. Access to the oil filter is the same as without the panel fitted (Unlike the Lotus version) Learn MoreExcl. Tax: £109.95 Incl. Tax: £131.94 -
S2/S3 Elise and Exige (Toyota 4 cyl) Toe Link Kit (Tapered Uprights)
S2 Toyota Toe Link Kit (Tapered Uprights) Toe link kit for all Toyota engined Elise, Exige and 2Eleven (4 Cylinder cars, NOT V6) Learn MoreExcl. Tax: £339.95 Incl. Tax: £407.94 -
S2 Toyota Toe Link Kit With Cross Brace (Tapered Uprights)
S2 Toyota Toe Link Kit With Cross brace(Tapered Uprights) Learn MoreExcl. Tax: £474.95 Incl. Tax: £569.94 -
S2 K Series Toe Link Kit (Later K Series Cars With Tapered Uprights)
S2 K Series Toe Link Kit (Later K Series Cars With Tapered Uprights) Learn MoreExcl. Tax: £339.95 Incl. Tax: £407.94 -
S2 K Series Toe Link Kit (Early K Series Cars With Parallel Uprights)
S2 K Series Toe Link Kit (Early K Series Cars With Parallel Uprights) Learn MoreExcl. Tax: £339.95 Incl. Tax: £407.94 -
S2 Hub / Wheel Bearing without speed sensor
S2 Hub / Wheel Bearing Learn MoreExcl. Tax: £79.50 Incl. Tax: £95.40 -
S2 Exige Cross Brace
S2 Exige Cross Brace B120D0040F Learn MoreExcl. Tax: £45.12 Incl. Tax: £54.14 -
S1 Wheel Bearing (TIMKEN)
Lotus S1 Timken Wheel Bearing. Highest quality bearing for all models of S1 Elise and Exige. Each bearing is supplied with two of the correct Circlips (No drive shaft nut supplied) These bearings are produced by Timken, an OEM supplier of bearings Equivalent to Lotus part number A111C6002F Learn MoreExcl. Tax: £39.49 Incl. Tax: £47.39 -
S1 Toe Link Kit (Late Cars With Steel Uprights)
S1 Toe Link Kit (Late Cars With Steel Uprights) Learn MoreExcl. Tax: £339.95 Incl. Tax: £407.94 -
S1 Toe Link Kit (Early Cars With Alloy Uprights, Double outer Bracket)
Spitfire Engineering S1 Toe Link Kit (Early Cars With Alloy Uprights, Double outer Bracket) Learn MoreExcl. Tax: £539.95 Incl. Tax: £647.94 -
S1 Elise/Exige/340R Wheel Hub Flange
S1 Elise/Exige/340R Wheel Hub Flange Equivalent to lotus part number A111C6001F & A111C6021F Made in the UK by OEM supplier from forged EN24 Steel. Learn MoreExcl. Tax: £74.95 Incl. Tax: £89.94 -
S1 (Wheel Bearing) Circlip
S1 (Wheel Bearing) Circlip One circlip, Two required per bearing Learn More -
Rear Toe-link Outer Joint Late S1 & S2 <2003 A117D0074S
Outer toe-link joint for later S1 with steel rear upright and S2 prior to 2003 Lotus part number A117D0074S (45mm M10x1.25 stud type joint) Also used on most N/A VX220's Learn MoreExcl. Tax: £29.95 Incl. Tax: £35.94 -
Rear Toe-link Outer Joint All Models 2003 Onwards A117D0089S
Standard outer toe-link joint for all models of S2 from about 2003 onwards Lotus part number A117D0089S Taper seat type joint Also used on most Turbo VX220's Learn MoreExcl. Tax: £29.95 Incl. Tax: £35.94 -
Rear Toe-link Inner Joint All Models Without Cross Brace A117D0090S
Standard toe-link inner joint.(non cross brace) as supplied for all models of 4cyl Elise & Exige without the factory cross brace kit. Also used on the VX220's, 340R etc Ball joint toe-link inboard LH thread 10.9 grade M10 X 1.25 - 65mm long Lotus part number A117D0090S Learn MoreExcl. Tax: £29.95 Incl. Tax: £35.94 -
Rear Toe-link Inner Joint (Genuine) Cross Brace Type
Cross brace type toe-link inner joint as fitted to cars with the rear cross brace kit. LH thread (As used on S2 Exige models) Lotus part number B120D0036F Learn MoreExcl. Tax: £81.95 Incl. Tax: £98.34