Suspension

Seriously Lotus supply genuine, original and Nitron Racing Lotus components. We are an authorised stockist and supplier of Nitron Racing NTR suspension systems.

Items 26 to 50 of 57 total

per page

Page:
  1. 1
  2. 2
  3. 3
  • Lotus Emira V6 (2022-) NTR 3 Way 46mm Race Pro Sport Suspension Kit

    Lotus Emira V6 (2022-) NTR 3 Way 46mm Race Pro Sport Suspension Kit Our NTR 46mm Race shocks have competed in hundreds of races and benefit from a decade of evolution. Run on the original factory GT3 Exiges, these shocks have been honed to perfection and use Nitron's very best parts combined with an unrivalled development program. The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control. Using the superior 46mm piston from the RacePro range of NTR shocks; this kit is designed for serious race use and has been adopted (where regulations permit) in almost every Lotus race series around the world. The kit comprises four 3-way adjustable dampers with fitted springs. Tailored to high-profile drivers, the NTR Race shocks performance is achieved through accurate control of its 3-way independent damping. The standard spring rates for this kit are 850 lbs/" front & 1150 lbs/" rear. 3-Way independent damping adjustment. By incorporating our class leading large diameter piston and ultra-strong piston rod, the R3 system demonstrates outstanding levels of performance, damping control and adjustment. Piggyback mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car. The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas. The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters. Learn More
    Excl. Tax: £3,980.00 Incl. Tax: £4,776.00

  • Lotus Exige V6 Nitron NTR Cup Sport 3 way Suspension Kit

    Lotus Exige V6 NTR Cup Sport 3 way Suspension Kit CUP Sport 40/46 SL Spec fast road 46/46 Learn More
    Excl. Tax: £3,329.00 Incl. Tax: £3,994.80

  • Excl. Tax: £29.95 Incl. Tax: £35.94

  • Nitron NTR 46 - 3 way

    Nitron NTR 46 - 3 way This is without question the Ultimate Race shock for you Lotus. The Race Pro shock is a development of Nitrons proven 40mm GT3 kit but built from 46mm race components. A 16mm piston rod also transfers more oil to the reservoir for improved fine bump control. This is a full race shock, the larger piston providing more control over the very short shock motions found under braking and corner exit under power. This really is a no-compromise shock for the serious driver who really needs and demands the ultimate. These three way adjustable dampers come with a remote reservoir. Please do not hesitate to contact us with you requirements!!!!! Learn More
    Excl. Tax: £3,425.00 Incl. Tax: £4,110.00

  • Nitron Springs

    Replacement Nitron Springs Not all springs are in stock, Delivery may not be immediately. Priced individually If the length and spring rate you require is not listed please contact us Learn More
    Excl. Tax: £74.00 Incl. Tax: £88.80

  • Nitron Street Series Two (All K Series models)

    Nitron Street Series Two A development of the original street series with updated internals and a revised colour scheme. Spring Rates S1 & S2 K Series cars 275/350 Learn More
    Excl. Tax: £826.80 Incl. Tax: £992.16

  • Nitron Wishbone Inner Bearing Kit

    Nitron Wishbone Inner Bearing Kit Learn More
    Excl. Tax: £399.95 Incl. Tax: £479.94

  • Rear Toe-link Inner Joint (Genuine) Cross Brace Type

    Cross brace type toe-link inner joint as fitted to cars with the rear cross brace kit. LH thread (As used on S2 Exige models) Lotus part number B120D0036F Learn More
    Excl. Tax: £81.95 Incl. Tax: £98.34

  • Rear Toe-link Inner Joint All Models Without Cross Brace A117D0090S

    Standard toe-link inner joint.(non cross brace) as supplied for all models of 4cyl Elise & Exige without the factory cross brace kit. Also used on the VX220's, 340R etc Ball joint toe-link inboard LH thread 10.9 grade M10 X 1.25 - 65mm long Lotus part number A117D0090S Learn More
    Excl. Tax: £29.95 Incl. Tax: £35.94

  • Rear Toe-link Outer Joint All Models 2003 Onwards A117D0089S

    Standard outer toe-link joint for all models of S2 from about 2003 onwards Lotus part number A117D0089S Taper seat type joint Also used on most Turbo VX220's Learn More
    Excl. Tax: £29.95 Incl. Tax: £35.94

  • Rear Toe-link Outer Joint Late S1 & S2 <2003 A117D0074S

    Outer toe-link joint for later S1 with steel rear upright and S2 prior to 2003 Lotus part number A117D0074S (45mm M10x1.25 stud type joint) Also used on most N/A VX220's Learn More
    Excl. Tax: £29.95 Incl. Tax: £35.94

  • S1 (Wheel Bearing) Circlip

    S1 (Wheel Bearing) Circlip One circlip, Two required per bearing Learn More
    Excl. Tax: £1.95 Incl. Tax: £2.34 As low as: £1.80

  • S1 Elise/Exige/340R Wheel Hub Flange

    S1 Elise/Exige/340R Wheel Hub Flange Equivalent to lotus part number A111C6001F & A111C6021F Made in the UK by OEM supplier from forged EN24 Steel. Learn More
    Excl. Tax: £74.95 Incl. Tax: £89.94

  • S1 Toe Link Kit (Early Cars With Alloy Uprights, Double outer Bracket)

    Spitfire Engineering S1 Toe Link Kit (Early Cars With Alloy Uprights, Double outer Bracket) Learn More
    Excl. Tax: £539.95 Incl. Tax: £647.94

  • S1 Toe Link Kit (Late Cars With Steel Uprights)

    S1 Toe Link Kit (Late Cars With Steel Uprights) Learn More
    Excl. Tax: £339.95 Incl. Tax: £407.94

  • S1 Wheel Bearing (TIMKEN)

    Lotus S1 Timken Wheel Bearing. Highest quality bearing for all models of S1 Elise and Exige. Each bearing is supplied with two of the correct Circlips (No drive shaft nut supplied) These bearings are produced by Timken, an OEM supplier of bearings Equivalent to Lotus part number A111C6002F Learn More
    Excl. Tax: £39.49 Incl. Tax: £47.39

  • S2 Exige Cross Brace

    S2 Exige Cross Brace B120D0040F Learn More
    Excl. Tax: £45.12 Incl. Tax: £54.14

  • Excl. Tax: £79.50 Incl. Tax: £95.40

  • S2 K Series Toe Link Kit (Early K Series Cars With Parallel Uprights)

    S2 K Series Toe Link Kit (Early K Series Cars With Parallel Uprights) Learn More
    Excl. Tax: £339.95 Incl. Tax: £407.94

  • S2 K Series Toe Link Kit (Later K Series Cars With Tapered Uprights)

    S2 K Series Toe Link Kit (Later K Series Cars With Tapered Uprights) Learn More
    Excl. Tax: £339.95 Incl. Tax: £407.94

  • S2 Toyota Toe Link Kit With Cross Brace (Tapered Uprights)

    S2 Toyota Toe Link Kit With Cross brace(Tapered Uprights) Learn More
    Excl. Tax: £474.95 Incl. Tax: £569.94

  • S2/S3 Elise and Exige (Toyota 4 cyl) Toe Link Kit (Tapered Uprights)

    S2 Toyota Toe Link Kit (Tapered Uprights) Toe link kit for all Toyota engined Elise, Exige and 2Eleven (4 Cylinder cars, NOT V6) Learn More
    Excl. Tax: £339.95 Incl. Tax: £407.94

  • Seriously Lotus Shear Panel (will fit with our Pro-Sump)

    Applications - All S2 (Toyota) Elise/Exige/2-Eleven (Not 2010 cup cars) This Seriously Lotus Shear Panel has been designed to fit with the larger capacity baffled Pro-sump. (Will also fit with the standard sump) It reduces longitudinal and lateral compliance of the rear suspension, increasing lateral hub stiffness and tyre contact patch stiffness, therefore maximising vehicle potential on the circuit. Including the fitting kit this shear panel weighs an incredible 0.8kg 210mm wide, 590mm long with 20mm sides This shear panel fits underneath the engine/gearbox and connects the chassis and rear of the subframe. Simple bolt on modification for those who enjoy circuit driving. For those with the Lotus shear panel already fitted that wish to upgrade to a Pro-sump, then this is an ideal modification. Simply remove the Lotus Shear Panel and replace with this Seriously Lotus version. (It used 6 of the 8 mounting points used by Lotus),. We have designed this panel so that it is fully interchangeable with the Lotus Shear Panel but allowing the fitment of our baffled sump (a must for circuit use) A significant added benefit of this panel is the fact that when changing the oil filter this panel does not need to be removed/ cleaned due to spilt oil. Access to the oil filter is the same as without the panel fitted (Unlike the Lotus version) Learn More
    Excl. Tax: £109.95 Incl. Tax: £131.94

  • Seriously Lotus Wishbone Bush kit

    Wishbone Bush Kit. A complete wishbone bush kit consisting of 14 Long and 4 Short Seriously Lotus bushes. These bushes are a cost effective alternative to the expensive OE Lotus bushes. Lotus supply three differant bushes for your wishbones, 4 short in the rear suspension lower arm front pivot (2 pairs) 2 Long in the front suspension upper arm rear pivot. (soft) 12 Long in the remaining pivots (standard hardness) Fits all 4 cylinder Elise and Exige models as well as VX220 and Europa etc Our kit does NOT have the 'soft' bush as we found a slight improvement in the control of the cars geometry by fitting the slightly harder bush in all the pivot points. Our bushes are ideal to repalce standard bushes or an upgrade, when the harshness of solid type bushes is not desireable! Learn More
    Excl. Tax: £173.95 Incl. Tax: £208.74 As low as: £204.00

  • Seriously Lotus Wishbone Bushes (Singles)

    Wishbone Bushes. Lotus supply three differant bushes for your wishbones, 4 short in the rear suspension lower arm front pivot (2 pairs) 2 Long in the front suspension upper arm rear pivot. (soft) 12 Long in the remaining pivots (standard hardness) Our bushes do not have the 'soft' bush as we found a slight improvement in the control of the cars geometry by fitting the slightly harder bush in all the pivot points.However we can supply the soft Lotus bush should it be required! Our bushes are ideal to repalce standard bushes or an upgrade, when the harshness of solid type bushes is not desireable! Learn More
    Excl. Tax: £10.95 Incl. Tax: £13.14

Items 26 to 50 of 57 total

per page

Page:
  1. 1
  2. 2
  3. 3