Brake Discs

S2/S3 4 Cylinder cars brake discs These brake discs have curved vanes which are handed left and right to ensure balanced cooling accross both sides of the car, unlike the original discs which use one casting and have curved vanes all in the same direction. This leads to one side of the cars brakes being cooled better than the other!!! Many of the aftermarket discs that are available also use one casting with vanes which are in one direction only! Then they have grooves or holes put onto the disc to make them handed. Our discs use handed castings and should not be confused with other products on the market. Diameter = 288mm Thickness = 26mm Braking surface = Plain / undrilled Disc type = Vented Vanes = Curved, handed left and right Learn More

A pair of Alcon 332mm brakes discs with separate bell / hand brake bell for the superb Exige V6. (Will fit all V6 Exige models) These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the rear of the Cup and LF1 models The bell is also produced by Alcon and is Xylan coated for corrosion protection One Lotus supplied two piece rear disc is currently £822.89 + vat.....(Almost £1975.00 per pair) Learn More

A pair of handed 332mm Alcon Rear brake disc rotas with a mounting holes to suit the Exige V6 with 2 piece rear discs These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the rear brake bells supplied by Lotus on the V6 Exige with 2 piece discs Supplied as a pair of disc rota's (No bells) (Lotus supplied discs are only available from lotus as a pair of complete disc / bell assembly) Direct replacement for the Lotus supplied disc rota Learn More

Exige V6 and Evora Rear Brake Discs (curved vane one piece) 2 x 332mm x 26mm Drilled with curved vanes Fits Evora and Exige V6 rear NOT Evora 400 Supplied as a pair of discs Learn More

A pair of handed 295mm Alcon brake disc rotas with a mount hole pcd of 177.8mm. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. These brake disc rota's are very light at 4.2kgs each. Even when assembled too fixed bells they are still only 4.9kgs (A standard S2 Lotus disc is 5.9kgs) Learn More

A pair of Alcon race quality 295mm Brake Disc rota's with fixed alloy bells These 295mm Alcon brake discs are the very best thats available, with 'c' shaped grooves for improved performance and increased pad life. These discs really are the ultimate brake disc available for your Lotus Supplied with the correct strength AP Racing bolts, nuts and washers as well as the fixed bells These brake disc rota's are very light at 4.2kgs each. Even when assembled with the fixed bells they are still only 4.9kgs (A standard S2 288mm Lotus disc is 5.9kgs) These 295 Discs will not fit the rear of an otherwise standard car (Front only) Learn More

A pair of handed 343mm Alcon Rear brake disc rotas with a mounting holes to suit the Exige V6 with 2 piece rear discs These very special Upgraded Big brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the reart brake bells supplied by Lotus on the V6 Exige with 2 piece discs Supplied as a pair of disc rota's (No bells) (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota These new rear discs have a larger swept area than the standard disc and use the Exige and Evora front brake pad Learn More

A pair of handed 343mm X 32mm Alcon Front brake disc rotas with a mounting holes to suit the Exige V6 with alloy bells. These very special Upgraded brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the front brake bells supplied by Lotus on the V6 Exige with alloy belled discs Supplied as a pair of discs (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota Learn More

A pair of Alcon 343mm brakes discs with separate bell / hand brake bell for the superb Exige V6. (Will fit all V6 Exige models) These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the rear of the Cup and LF1 models The bell is also produced by Alcon and is Zylan coated for corrosion protection One Lotus supplied two piece rear disc is currently £822.89 + vat.....(Almost £1975.00 per pair) Due to the larger disc area these should be used with the larger front brake pads (They will work with standard size rear pads but this is not recommended) Learn More

Exige V6 332mm Alcon Front disc with Floating Bells These floating brake discs are a direct replacement for the standard 332mm front disc on the Exige V6. Each fit contains the following parts 2 x 332 x 32mm Alcon discs 2 x Floating bells 24 x titanium drive bobbins 24 x nut/bolt fittings 12 x disc anti rattle clips. The anti rattle clips stop the 'clatter' usually found with floating bells Priced and sols as a pair of discs Learn More

Exige V6 Front Floating Bell Upgrade Kit A floating bell upgrade kit for cars already fitted with two piece front brake discs. Designed to be installed with the factory supplied two piece brake rota. The kit consists of the following parts 2 x Alloy floating bells 24 Titanium drive bobbins 24 Nuts / bolts 12 x Anti rattle clips Learn More

Exige V6 343mm Alcon Front disc with Floating Bells These floating 343mm brake discs are a direct replacement for the standard 332mm front disc on the Exige V6. Each fit contains the following parts 2 x 343 x 32mm Alcon discs 2 x Floating bells 24 x titanium drive bobbins 24 x nut/bolt fittings 12 x disc anti rattle clips. 4 x caliper spacers The anti rattle clips stop the 'clatter' usually found with floating bells Priced and sold as a pair of discs Learn More

Exige V6 OEM Front Brake Discs Genuine Lotus parts Supplied as a pair Lotus part numbers:- A138J0014F A138J0015F Learn More

A pair of Alcon 370mm x 32mm brakes discs and alloy bells to fit the Evora 400 series cars 400/410/430. These high grade discs are a direct replacement for standard two piece disc as fitted to all models of the Evora 400 range Supplied as a pair pre assembled and ready to install. Learn More

A pair of Alcon 350mm brakes discs with separate bell / hand brake bell for the Evora 400 series cars These high grade discs are a direct replacement for both standard two piece disc as fitted to the 400, 410 and 430 models The bell is also produced by Alcon and is Xylan coated for corrosion protection A pair of Lotus supplied two piece rear discs is currently over £1700 + vat for the drilled version and £1890 for the J Hook version Learn More

Genuine Lotus Exige V6 J hook front brake discs (Pair) 332mm x 32mm A138J4021F A138J4022F Learn More

Genuine Lotus Exige V6 J hook rear brake discs (Pair) 332mm x 26mm A138J4023F A138J4024F Learn More

S2/S3 4 Cyl Alloy Belled Brake Discs A pair of alloy bells and Drilled discs to fit all models of S2/S3 using the standard 288mm discs. These are a direct replacement without any modifications. Anodised bells (Titanium in colour) These are the very best value and quality alloy belled disc available for the S2! Unlike many brake discs for the S2, these have the correct cooling vane orientation for each side of the car. Supplied with AP Racing bolts nuts etc etc Improve the braking and looks of your car with these Brake Discs.... Discs rota's also available seperately, so no need to replace the bells with each set of new discs. Standard S2 discs are between 5.9 kgs and 6.0 kgs These alloy belled discs are 5.6 kgs Priced and supplied as a pair of discs Learn More

A pair of handed 332mm X 32mm Alcon Front brake disc rotas with a mounting holes to suit the Exige V6 with alloy bells. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the front brake bells supplied by Lotus on the V6 Exige with alloy belled discs Supplied as a pair of discs (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota Learn More

308mm one piece S2 Brake discs. These 308mm brake discs have curved vanes which are handed left and right to ensure balanced cooling accross both sides of the car, unlike the original 288mm discs which use one casting and have curved vanes all in the same direction. This leads to one side of the cars brakes being cooled better than the other!!! Many of the aftermarket discs that are available also use one casting with vanes which are in one direction only! Then they have grooves or holes put onto the disc to make them handed. These discs use handed castings and should not be confused with other products on the market. These discs are as used on the Europa SE and 2010 Exige with the factory fitted fast road brake kit!! Could be used as part of a front brake upgrade on a standard S2 VX220 or Europa, using the standard 2 pot calipers, spacers and the correct length caliper retaining bolts Diameter = 308mm Thickness = 26mm Braking surface = Drilled Disc type = Vented Vanes = Curved, handed left and right Learn More

308mm Alcon Discs and Seriously Lotus Fully Floating Bells A pair of very special, high quality Alcon 308mm Brake Discs and fully floating Seriously Lotus bells including fixing bolts. These Floating bells where originally designed by the brilliant engineers at Nitron. We have secured the design from Nitron and have them manufactured in exacxtly the same materials to the same specification as the originals. Although designed to be used with a 4 pot racing caliper, This kit can be used with the standard Lotus 2 pot caliper utilising spacers for the caliper. A caliper spacer kit is available to allow fitment using the standard 2 pot calipers Learn More

A pair of Alcon race quality 308mm Brake Disc rota's with fixed alloy bells These 308mm Alcon brake discs are the very best thats available, with 'c' shaped grooves for improved performance and increased pad life. These discs really are the ultimate brake disc available for your Lotus Supplied with the correct strength AP Racing bolts, nuts and washers as well as the fixed bells These brake disc rota's are very light at 4.5kgs each. Even when assembled with the fixed bells they are still only 5.3kgs (A standard S2 288mm Lotus disc is 5.9kgs) A caliper spacer kit is also available to allow fitment to cars with the standard 2 pot calipers These discs are also avialable with Nitron Fully Floating bells Learn More

Fixed Alloy Disc Bells (S2) These fixed brake bells have a disc mounting pcd of 177.8 so can be used with most popular brake discs. Aluminium fixed disc bell billet machined in 7075-T6 and Hard Anodised. (Originally design by Nitron) These bells weigh an amazing 600 grams Even when attached to our 308mm Alcon brake rota's (which only weigh 4.5kgs) they are still only 5.3kgs Inc the bolts (A standard S2 Lotus disc is over 5.9kgs) Learn More

A pair of handed 308mm Alcon brake disc rotas with a mount hole pcd of 177.8mm. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. These brake disc rota's are very light at 4.5kgs each. Even when assembled with the fixed bells they are still only 5.3kgs (A standard S2 Lotus disc is 5.9kgs) Learn More