Brake Discs

A pair of replacement AP Racing 308mm Grooved Brake Disc Rota's 308mm x 26mm brake discs with a mounting PCD of 190.5mm These discs are an AP Racing direct replacement for cars fitted with the AP Racing/ Lotus supplied big brake kit. Also available drilled please contact us for price and delivery lead time Bell shown for illustration purposes only. Learn More

S2/S3 4 Cyl Drilled brake discs (Sold as a Pair) A pair or discs that are a direct replacement for any standard S2 drilled brake disc. These brake discs have curved vanes which are handed left and right to ensure balanced cooling accross both sides of the car, unlike the original discs which use one casting and have curved vanes all in the same direction. This leads to one side of the cars brakes being cooled better than the other!!! Many of the aftermarket discs that are available also use one casting with vanes which are in one direction only! Then they have grooves or holes put onto the disc to make them handed. Our discs use handed castings and should not be confused with other products on the market. Produced here in the UK Diameter = 288mm Thickness = 26mm Braking surface = Drilled Disc type = Vented Vanes = Curved, handed left and right Learn More

A pair of Alcon race quality 288mm Rear Brake Disc rota's with Fixed alloy bells These 288mm Alcon brake discs are the very best thats available, with 'c' shaped grooves for improved performance and increased pad life. These discs really are the ultimate brake disc available for your the rear of your Lotus Elise, Exige or 211. Supplied with the correct strength AP nuts, bolts and washers as well as the fixed bells that have be specificaly designed for use on the S2 Elise and Exige These brake disc rota's are the lightest available for the rear of an S2. Even when assembled with the fixed bells they are still only 4.2kgs (A standard S2 Lotus disc is 5.9kgs) This gives a weight saving for each rear disc of 1.7 kgs or a total of 3.4 kgs. These discs and bells are for rear fitment only and must use the original single piston / hand brake caliper. These 288 discs will not fit if using a front 2 pot caliper on the rear We designed these with the intention of reducing the weight and not having a rusty area of disc surface that is not swept by the brake pad, These discs are also avialable with Nitron Fully Floating bells Learn More

288mm Alcon Discs and Seriously Lotus Fully Floating Bells A pair of very special, high quality Alcon 288mm Brake Discs and fully floating Seriously Lotus bells including fixing bolts. These Floating bells where originally designed by the brilliant engineers at Nitron. We have secured the design from Nitron and have them manufactured in exacxtly the same materials to the same specification as the originals. These discs and bells are for rear fitment only and must use the original single piston / hand brake caliper. These 288 discs will not fit if using a front 2 pot caliper on the rear Please call should you need further advice and information Learn More

Pagid Brake Discs S1 A pair of 282mm steel brake discs made by OEM manufacturer Pagid Learn More

A pair of handed 315mm Alcon brake disc rotas with a mount hole pcd of 190.5mm. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the alloy bells supplied by Lotus on S2 cars with alloy belled discs (190.5 PCD) Supplied as a pair of discs Learn More

A pair (2) of Alcon endurance quality 315mm Brake Disc rota's with Floating bells and anti rattle clips These 315mm Alcon brake discs have 'c' shaped grooves for improved performance and increased pad life. These discs really are our ultimate brake disc available for your Lotus Elise or Exige, 4 cylinder car (NOT S1) CANNOT BE USED WITH THE STANDARD 2 POT CALIPERS Supplied with the correct strength AP Racing bolts, nuts and washers as well as the floating bells, Titanium bobbins and stainless anti-rattle springs. Learn More

S1 Brake Service Kit 4 x 282mm steel brake discs made by OEM manufacturer Pagid 1 x set front brake pads (Pagid road pads) 1 x set rear brake pads (Pagid road pads) Learn More

A pair of handed 288mm Alcon brake disc rotas with a mount hole pcd of 177.8mm. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. These brake disc rota's are very light at 3.9kgs each. Even when assembled with the fixed bells they are still only 4.2kgs (A standard S2 Lotus disc is 5.9kgs) Will only fit on the rear of an S2 Learn More

A pair of Alcon 332mm brakes discs and anodised alloy bells to fit the Exige V6. These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the Cup, LF1, 410 and 430 models (A pair of two piece discs from lotus are over £1695 + vat!!!!) Learn More