You have no items in your shopping cart.
Brake Discs
-
Exige V6 Front Floating Bell Upgrade Kit
Exige V6 Front Floating Bell Upgrade Kit A floating bell upgrade kit for cars already fitted with two piece front brake discs. Designed to be installed with the factory supplied two piece brake rota. The kit consists of the following parts 2 x Alloy floating bells 24 Titanium drive bobbins 24 Nuts / bolts 12 x Anti rattle clips Learn MoreExcl. Tax: £474.95 Incl. Tax: £569.94 -
Exige V6 J Hook Front And Rear Brake Discs A138J4021F/22F/23F/24F
Genuine Lotus Exige V6 J hook front and rear brake discs (All Four Discs) Front discs 332mm x 32mm A138J4021F A138J4022F Rear Discs 332mm x 26mm A138J4023F A138J4024F Learn MoreExcl. Tax: £2,499.95 Incl. Tax: £2,999.94 -
Exige V6 J Hook Front Brake Discs A138J4021F/22F
Genuine Lotus Exige V6 J hook front brake discs (Pair) 332mm x 32mm A138J4021F A138J4022F Learn MoreExcl. Tax: £1,239.95 Incl. Tax: £1,487.94 -
Exige V6 J Hook Rear Brake Discs A138J4023F/24F
Genuine Lotus Exige V6 J hook rear brake discs (Pair) 332mm x 26mm A138J4023F A138J4024F Learn MoreExcl. Tax: £1,399.95 Incl. Tax: £1,679.94 -
Exige V6 OEM Front Brake Discs
Exige V6 OEM Front Brake Discs Genuine Lotus parts Supplied as a pair Lotus part numbers:- A138J0014F A138J0015F Learn MoreExcl. Tax: £297.95 Incl. Tax: £357.54 -
Fixed Alloy Disc Bells (S2)
Fixed Alloy Disc Bells (S2) These fixed brake bells have a disc mounting pcd of 177.8 so can be used with most popular brake discs. Aluminium fixed disc bell billet machined in 7075-T6 and Hard Anodised. (Originally design by Nitron) These bells weigh an amazing 600 grams Even when attached to our 308mm Alcon brake rota's (which only weigh 4.5kgs) they are still only 5.3kgs Inc the bolts (A standard S2 Lotus disc is over 5.9kgs) Learn MoreExcl. Tax: £164.95 Incl. Tax: £197.94 -
Pagid Brake Discs S1
Pagid Brake Discs S1 A pair of 282mm steel brake discs made by OEM manufacturer Pagid Learn More -
S1 Brake Service Kit
S1 Brake Service Kit 4 x 282mm steel brake discs made by OEM manufacturer Pagid 1 x set front brake pads (Pagid road pads) 1 x set rear brake pads (Pagid road pads) Learn MoreExcl. Tax: £219.95 Incl. Tax: £263.94 -
S2/S3 4 Cyl Alloy Belled Drilled Brake Discs
S2/S3 4 Cyl Alloy Belled Brake Discs A pair of alloy bells and Drilled discs to fit all models of S2/S3 using the standard 288mm discs. These are a direct replacement without any modifications. Anodised bells (Titanium in colour) These are the very best value and quality alloy belled disc available for the S2! Unlike many brake discs for the S2, these have the correct cooling vane orientation for each side of the car. Supplied with AP Racing bolts nuts etc etc Improve the braking and looks of your car with these Brake Discs.... Discs rota's also available seperately, so no need to replace the bells with each set of new discs. Standard S2 discs are between 5.9 kgs and 6.0 kgs These alloy belled discs are 5.6 kgs Priced and supplied as a pair of discs Learn MoreExcl. Tax: £239.95 Incl. Tax: £287.94 -
S2/S3 4 Cyl Brake Discs non drilled curved vane (sold in pairs)
S2/S3 4 Cylinder cars brake discs These brake discs have curved vanes which are handed left and right to ensure balanced cooling accross both sides of the car, unlike the original discs which use one casting and have curved vanes all in the same direction. This leads to one side of the cars brakes being cooled better than the other!!! Many of the aftermarket discs that are available also use one casting with vanes which are in one direction only! Then they have grooves or holes put onto the disc to make them handed. Our discs use handed castings and should not be confused with other products on the market. Diameter = 288mm Thickness = 26mm Braking surface = Plain / undrilled Disc type = Vented Vanes = Curved, handed left and right Learn MoreExcl. Tax: £68.95 Incl. Tax: £82.74 -
S2/S3 4 Cyl Drilled Brake Discs (curved vane)
S2/S3 4 Cyl Drilled brake discs (Sold as a Pair) A pair or discs that are a direct replacement for any standard S2 drilled brake disc. These brake discs have curved vanes which are handed left and right to ensure balanced cooling accross both sides of the car, unlike the original discs which use one casting and have curved vanes all in the same direction. This leads to one side of the cars brakes being cooled better than the other!!! Many of the aftermarket discs that are available also use one casting with vanes which are in one direction only! Then they have grooves or holes put onto the disc to make them handed. Our discs use handed castings and should not be confused with other products on the market. Produced here in the UK Diameter = 288mm Thickness = 26mm Braking surface = Drilled Disc type = Vented Vanes = Curved, handed left and right Learn MoreExcl. Tax: £97.50 Incl. Tax: £117.00
