Braking

Seriously Lotus 4 Pot 308mm Floating Disc Brake Upgrade Kit (All S2 Toyota cars) Buy sourcing all the best components from the leading brake manufacturers we have put togarther the very best 4 pot upgrade kit for your S2. Buy using the Lotus - AP racing calipers the correct piston size for the cars brake master cylinder is maintained This kit consists of the following parts:- 2 x AP Racing/ Lotus direct fit four pot calipers (No brackets necessary) Matching front and rear brake pads (Ferodo 2500) 2 x Seriously Lotus/Nitron floating alloy bells with titanium bobbins and high quality A P Racing bolts, 2 x 308mm Alcon Vented Discs 4 x Braided brake hoses Caliper and disc mouting bolts and screws Your car will need the wider Exige S2 size wheels for this kit to fit. This brake kit will NOT fit inside a standard Lotus 16 inch (5.5 wide) wheel. Everything needed to upgrade the braking system of an S2, If you use your car on the track we have added the option of using any of the following brake pad materials as an upgrade Pagid RS4-2 Carbone Lorraine RC5+ Carbone Lorraine RC6 We can also offer an upgrade to Castrol SRF brake fluid. Learn More

Seriously Lotus 4 Pot 308mm Brake Upgrade Kit (All S2 Toyota cars) Buy sourcing all the best components from the leading brake manufacturers we have put togarther this very cost effective 4 pot upgrade kit for your S2. Buy using the Lotus - AP racing calipers the correct piston size for the cars brake master cylinder is maintained This kit consists of the following parts:- 2 x AP Racing/ Lotus direct fit four pot calipers (No brackets necessary) Matching front and rear brake pads (Ferodo 2500) 2 x Nitron fixed alloy bells with bolts, 2 x 308mm Alcon 2 x Braided brake hoses Caliper and disc mouting bolts and screws Your car may need the wider Exige S2 size wheels for this kit to fit. This brake kit will NOT fit inside a standard Lotus 16 inch (5.5 wide) wheel. Everything needed to upgrade the braking system of an S2, If you use your car on the track we have added the option of using any of the following brake pad materials as an upgrade Pagid RS4-2 Carbone Lorraine RC5+ Carbone Lorraine RC6 We can also offer Castrol SRF brake fluid. Learn More

S2/S3 4 Cyl Drilled brake discs (Sold as a Pair) A pair or discs that are a direct replacement for any standard S2 drilled brake disc. These brake discs have curved vanes which are handed left and right to ensure balanced cooling accross both sides of the car, unlike the original discs which use one casting and have curved vanes all in the same direction. This leads to one side of the cars brakes being cooled better than the other!!! Many of the aftermarket discs that are available also use one casting with vanes which are in one direction only! Then they have grooves or holes put onto the disc to make them handed. Our discs use handed castings and should not be confused with other products on the market. Produced here in the UK Diameter = 288mm Thickness = 26mm Braking surface = Drilled Disc type = Vented Vanes = Curved, handed left and right Learn More

S2/S3 4 Cylinder cars brake discs These brake discs have curved vanes which are handed left and right to ensure balanced cooling accross both sides of the car, unlike the original discs which use one casting and have curved vanes all in the same direction. This leads to one side of the cars brakes being cooled better than the other!!! Many of the aftermarket discs that are available also use one casting with vanes which are in one direction only! Then they have grooves or holes put onto the disc to make them handed. Our discs use handed castings and should not be confused with other products on the market. Diameter = 288mm Thickness = 26mm Braking surface = Plain / undrilled Disc type = Vented Vanes = Curved, handed left and right Learn More

S2/S3 4 Cyl Alloy Belled Brake Discs A pair of alloy bells and Drilled discs to fit all models of S2/S3 using the standard 288mm discs. These are a direct replacement without any modifications. Anodised bells (Titanium in colour) These are the very best value and quality alloy belled disc available for the S2! Unlike many brake discs for the S2, these have the correct cooling vane orientation for each side of the car. Supplied with AP Racing bolts nuts etc etc Improve the braking and looks of your car with these Brake Discs.... Discs rota's also available seperately, so no need to replace the bells with each set of new discs. Standard S2 discs are between 5.9 kgs and 6.0 kgs These alloy belled discs are 5.6 kgs Priced and supplied as a pair of discs Learn More

4 Counter sunk screw to secure the brake disc to the hub as used on ALL S2 Elise and Exige and also S3 Elise. M6x16 As these screws are purely for alignment purposes (They keep the disc aligned to aid wheel bolt fitting when changing a wheel), they are made from stainless steel. This helps to stop the screw becoming seized. 4 screw with each order (4 required per car) NOT EVORA OR EXIGE V6 Learn More

S2 Caliper Spacer Kit For 308mm Discs. A complete set of four anodised aluminium spacers and four longer 8.8 bolts to allow the fitment of 308mm front brake discs with the standard two pot calipers. This kit can be used on any S2 with the standard two pot calipers to install 308mm brake discs. They can even be used on cars with the standard size front wheels (subject to the balance weights being in the correct place) Learn More

S1 Brake Service Kit 4 x 282mm steel brake discs made by OEM manufacturer Pagid 1 x set front brake pads (Pagid road pads) 1 x set rear brake pads (Pagid road pads) Learn More

Ferodo F2500 Rear Brake Pads For the standard Brembo rear caliper As used on cars with the factory fitted fast road brake kit Learn More

Performance Friction Standard Front Brake Pads (2 pot) To fit the standard front caliper on S1 and S2 Elise, Exige, 211, Europa, VX220 etc etc Learn More

Performance Friction Rear Brake Pads Exige V6 / Evora 08 Compound Learn More

Performance Friction Rear Brake Pads Evora 400 08 Compound Learn More

Performance Friction Rear Brake Pads Emira 08 Compound Learn More

Performance Friction Front Brake Pads Exige V6 / Evora 08 Compound Learn More

Performance Friction Front Brake Pads Evora BBK Also for the Evora fitted with the Lotus supplied GT4 big brake kit 08 Compound Learn More

Performance Friction Front Brake Pads Evora 400 08 Compound Learn More

Performance Friction Front Brake Pads Emira Learn More

Performance Friction Brake Pads Lotus Motorsport Caliper To fit the 4 pot caliper as fitted/used by Lotus on the S1 motorsport cars (4 Pot calipers) 01 Compound Learn More

Performance Friction Brake Pads Lotus 4 Pot BBK 14mm Thick to fit the direct mount Lotus/AP Racing 4 pot caliper as fitted to the S2 Lotus Exige/Elise the the big brake kit 01 Compound Learn More

Pagid RS4-2 (Blue) Brake Pads (Standard Calipers) Pagid Blue is an ideal fast road / trackday pad, with good initial bite, excellant modulation and good fade resistance. Learn More

Pagid RS4-2 (Blue) AP Racing/Lotus 4 Pot Brake Pads Pagid Blue is an ideal fast road / trackday pad, with good initial bite, excellant modulation and good fade resistance. These pads are a direct replacement for the Lotus/AP Racing calipers as fitted to the2008- 2010 cars with performance pack brakes. (Pads retained by two pins) Learn More

Pagid RS14 (Black) Brake Pads (Standard Calipers) Pagid Black is an ideal trackday / race pad, with good initial bite, excellant modulation and good fade resistance. Learn More

Pagid RS14 (Black) AP Racing/Lotus 4 Pot Brake Pads (14.5mm thick) Pagid Black is an ideal trackday/Race pad, with good initial bite, excellant modulation and good fade resistance. These pads are a direct replacement for the Lotus/AP Racing calipers as fitted to the 2010 cars with performance pack brakes. (Pads retained by two pins) Learn More

Pagid brake pads (road use). ECE R90 approved. Front and Rear brake pads manufactured by Pagid, a well respected OEM supplier of automotive parts. These brake pads are a very cost effective heavy duty replacement for standard cars which are used on the road. Pagid material works well from cold and offers a cost effective replacement for the standard brake pads of any Elise, Exige or VX220. These brake pads are NOT a competition/track pad Learn More