Braking

Evora BBK Front Brake Pads Ferodo 2500 The same brake pad material as supplied in these cars from the factory Learn More

Evora Hand Brake Cable (All Models) Lotus part number E132J0005F 2 Cable required per car (LH and RH) Learn More

Evora V6 Brake Disc Securing Screws 2 x Front disc screws 2 x Rrear disc screws Learn More

Exige V6 & Evora Handbrake Assembly C132J0145F Genuine Lotus supplied part Two required per car, this assembly is for one side, includes the back plate, brake shoes. retaining clips, springs etc Learn More

Exige V6 332mm Alcon Brake Kit Consisting of :- 2 x 332mm x 32mm Front brake disc rota's 2 x Floating bell kits (Front) Including titanium bobbins, anti-rattle clips, nuts and bolts 2 x 332mm x 26mm Rear brake disc rota's 2 x Rear brake bells including nuts and bolts Brake pads as an option Ferodo 2500 Pagid RS29 Performance friction The front discs are assembled with fully floating bells and are also fitted with anti rattle clips. (Also available with a fixed bell-see options below) To stop the noises usually associated with floating bells we supply the kit with the anti-rattle clips as shown. Learn More

A pair of handed 332mm X 32mm Alcon Front brake disc rotas with a mounting holes to suit the Exige V6 with alloy bells. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the front brake bells supplied by Lotus on the V6 Exige with alloy belled discs Supplied as a pair of discs (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota Learn More

Exige V6 332mm Alcon Front disc with Floating Bells These floating brake discs are a direct replacement for the standard 332mm front disc on the Exige V6. Each fit contains the following parts 2 x 332 x 32mm Alcon discs 2 x Floating bells 24 x titanium drive bobbins 24 x nut/bolt fittings 12 x disc anti rattle clips. The anti rattle clips stop the 'clatter' usually found with floating bells Priced and sols as a pair of discs Learn More

A pair of handed 332mm Alcon Rear brake disc rotas with a mounting holes to suit the Exige V6 with 2 piece rear discs These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the rear brake bells supplied by Lotus on the V6 Exige with 2 piece discs Supplied as a pair of disc rota's (No bells) (Lotus supplied discs are only available from lotus as a pair of complete disc / bell assembly) Direct replacement for the Lotus supplied disc rota Learn More

Exige V6 343mm Alcon Front disc with Floating Bells These floating 343mm brake discs are a direct replacement for the standard 332mm front disc on the Exige V6. Each fit contains the following parts 2 x 343 x 32mm Alcon discs 2 x Floating bells 24 x titanium drive bobbins 24 x nut/bolt fittings 12 x disc anti rattle clips. 4 x caliper spacers The anti rattle clips stop the 'clatter' usually found with floating bells Priced and sold as a pair of discs Learn More

Exige V6 343mm Big Brake Kit Consisting of :- 2 x 343mm x 32mm Front brake disc rota's 2 x Floating bell kits (Front) Including titanium bobbins, anti-rattle clips, nuts and bolts 2 x 343mm x 26mm Rear brake disc rota's 2 x Rear brake bells including nuts and bolts 4 x stainless caliper spacers 2 sets of brake pads. (Same pads front and rear) The standard brake pads offered in this kit are the Ferodo 2500, optionally Performance friction pads are also available (see options below) The front discs are assembled with fully floating bells and are also fitted with anti rattle clips. It is our opinion that discs this large size should be installed with floating bells, To stop the noises usually associated with floating bells we supply the kit with the anti-rattle clips shown. The standard car uses slightly smaller brake pads in the rear, this kit uses the larger front brake pads in both the front and the rear!! Unlike some of the kits available that use the smaller rear pads in the both the front and rear Special attention to wheel weigh position is required on the front wheels with this brake kit Learn More

A pair of Alcon 343mm brakes discs with separate bell / hand brake bell for the superb Exige V6. (Will fit all V6 Exige models) These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the rear of the Cup and LF1 models The bell is also produced by Alcon and is Zylan coated for corrosion protection One Lotus supplied two piece rear disc is currently £822.89 + vat.....(Almost £1975.00 per pair) Due to the larger disc area these should be used with the larger front brake pads (They will work with standard size rear pads but this is not recommended) Learn More

A pair of handed 343mm X 32mm Alcon Front brake disc rotas with a mounting holes to suit the Exige V6 with alloy bells. These very special Upgraded brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the front brake bells supplied by Lotus on the V6 Exige with alloy belled discs Supplied as a pair of discs (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota Learn More

A pair of handed 343mm Alcon Rear brake disc rotas with a mounting holes to suit the Exige V6 with 2 piece rear discs These very special Upgraded Big brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the reart brake bells supplied by Lotus on the V6 Exige with 2 piece discs Supplied as a pair of disc rota's (No bells) (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota These new rear discs have a larger swept area than the standard disc and use the Exige and Evora front brake pad Learn More

A pair of Alcon 332mm brakes discs with separate bell / hand brake bell for the superb Exige V6. (Will fit all V6 Exige models) These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the rear of the Cup and LF1 models The bell is also produced by Alcon and is Xylan coated for corrosion protection One Lotus supplied two piece rear disc is currently £822.89 + vat.....(Almost £1975.00 per pair) Learn More

A pair of Alcon 332mm brakes discs and anodised alloy bells to fit the Exige V6. These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the Cup, LF1, 410 and 430 models (A pair of two piece discs from lotus are over £1695 + vat!!!!) Learn More

Exige V6 and Evora S1 Front Brake Pads Ferodo 2500 The same brake pad material as supplied in these cars from the factory (Not cup cars) Lotus equivalent part number A132J0001S Latest Lotus price £152.89 + VAT Learn More

Exige V6 and Evora RC5+ Carbone Lorraine Front Brake pads (Not Evora 400) Learn More

Exige V6 and Evora RC5+ Carbone Lorraine Rear Brake pads (Not Evora 400) Learn More

Exige V6 and Evora RC6 Carbone Lorraine Front Brake pads (Not Evora 400) Learn More

Exige V6 and Evora RC6 Carbone Lorraine Rear Brake pads (Not Evora 400) P Learn More

Exige V6 and Evora Rear Brake Discs (curved vane one piece) 2 x 332mm x 26mm Drilled with curved vanes Fits Evora and Exige V6 rear NOT Evora 400 Supplied as a pair of discs Learn More

Exige V6 and Evora S1 Rear Brake Pads Ferodo 2500 The same brake pad material as supplied in these cars from the factory (Not cup cars) These rear brake pads are the correct shape as supplied by Ferodo, They are not cut down front brake pads!!! Lotus equivalent part number A132J0002S Latest Lotus price £152.89 Learn More

Exige V6 and Evora Rear Brake Pads Pagid RS29 Also know as Pagid 'Yellow' Learn More

Exige V6 and Evora S Front Brake Pads Pagid RS29 NOT Evora 400 Front Also know as Pagid 'Yellow' Learn More