You have no items in your shopping cart.
Bushes and Bearings
Lotus suspension bushes and bearings. Original, genuine and Nitron Racing parts.
-
Anti Roll Bar Drop Link
Our own Anti Roll Bar Drop Link as used on all models of Elise,Exige and VX220. Worn and aging Anti Roll Bar Drop Links are a common cause of MOT failure. Made exclusively for Seriously Lotus in Europe (Looks exactly like the genuine Lotus part). Each link comes complete with two self locking nuts (correct fine pitch threads) Equivalent to Lotus part number A111C0063F Learn MoreExcl. Tax: £11.95 Incl. Tax: £14.34 -
Castor Adjustment Shims And Snubber Washers
Castor Adjustment Shims And Snubber Washers A kit of castor shims and snubber washers. Lotus use 8 Large shims (2 have a rubber face) and 8 small washers. These small washers are very very difficult to install so we supply 14 Large shims which are much easier to install 2 x Rubber faced snubber washers 14 x Castor adjustments shims Learn More -
Damper Replacement Nut and Bolt Kits
A set of bolts for the 4 Dampers or a full Nut and Bolt kit for your suspension. Available as either just the 8 damper mounting bolts or the 14 suspension pivot piont bolts(the other two use the rear toe link joint) . Also available as a full kit. Comes compete with Nyloc nuts and washers where necessary Learn MoreExcl. Tax: £9.95 Incl. Tax: £11.94 -
Evora and Exige V6 Anti-Roll Bar Bushes
Evora and Exige Polyurethane V6 Ant- Roll Bar Bushes A pair of up rated polyurethane anti-roll bar bushes (Powerflex) Available in two shore ratings:- Purple 80A shore rating (Road use/Trackdays) Black 95A shore rating (Trackday/Race) Supplies as a pair (one anti-roll bar kit) Learn MoreExcl. Tax: £29.90 Incl. Tax: £35.88 -
Evora V6 Spherical Joint B132D6005H (Rear Suspension)
Evora Rear Suspension Spherical Joint B132D6005H Genuine Lotus part Learn MoreExcl. Tax: £34.95 Incl. Tax: £41.94 -
Evora Wheel Bearing And Exige V6 Rear Wheel Bearing ( A132D0021F )
Evora And Exige Wheel Bearing (Hub) Wheel bearing/Hub assembly for Evora (All models) Front and Rear, Exige V6 Rear Lotus part number A132D0021F Learn MoreExcl. Tax: £179.95 Incl. Tax: £215.94 -
Exige and Evora V6 Spherical Joint B132D6006H (Rear Suspension)
Exige V6 Rear Suspension Spherical Joint B132D6006H Three joints used per side on Exige Two joints per side on Evora (Lower outer joint is the larger B132D6005H) Genuine OEM part Learn MoreExcl. Tax: £29.95 Incl. Tax: £35.94 -
Exige V6 Front Wheel Bearing
S3 Exige V6 Front Hub / Wheel Bearing for cars with ABS. (Complete with speed sensor) High quality SFK bearing pack as used by lotus Same as Lotus part number A138D6000F Lotus price £138.00 + vat As used on all 3Eleven models Learn MoreExcl. Tax: £109.95 Incl. Tax: £131.94 -
M16 Hub Bolt Kit (S1 & S2) Updated version
M16 Hub Bolt Kit (S1 & S2) Learn MoreExcl. Tax: £29.95 Incl. Tax: £35.94 -
Nitron Wishbone Inner Bearing Kit
Nitron Wishbone Inner Bearing Kit Learn MoreExcl. Tax: £399.95 Incl. Tax: £479.94 -
Rear Toe-link Inner Joint (Genuine) Cross Brace Type
Cross brace type toe-link inner joint as fitted to cars with the rear cross brace kit. LH thread (As used on S2 Exige models) Lotus part number B120D0036F Learn MoreExcl. Tax: £81.95 Incl. Tax: £98.34 -
Rear Toe-link Inner Joint All Models Without Cross Brace A117D0090S
Standard toe-link inner joint.(non cross brace) as supplied for all models of 4cyl Elise & Exige without the factory cross brace kit. Also used on the VX220's, 340R etc Ball joint toe-link inboard LH thread 10.9 grade M10 X 1.25 - 65mm long Lotus part number A117D0090S Learn MoreExcl. Tax: £29.95 Incl. Tax: £35.94 -
Rear Toe-link Outer Joint All Models 2003 Onwards A117D0089S
Standard outer toe-link joint for all models of S2 from about 2003 onwards Lotus part number A117D0089S Taper seat type joint Also used on most Turbo VX220's Learn MoreExcl. Tax: £29.95 Incl. Tax: £35.94 -
Rear Toe-link Outer Joint Late S1 & S2 <2003 A117D0074S
Outer toe-link joint for later S1 with steel rear upright and S2 prior to 2003 Lotus part number A117D0074S (45mm M10x1.25 stud type joint) Also used on most N/A VX220's Learn MoreExcl. Tax: £29.95 Incl. Tax: £35.94 -
S1 (Wheel Bearing) Circlip
S1 (Wheel Bearing) Circlip One circlip, Two required per bearing Learn More -
S1 Wheel Bearing (OEM Quality)
S1 Wheel Bearing (OEM Quality) These aftermarket wheel bearing have the same specifications and dimensions as the original equipment bearing. They are Taper roller bearings as per the original expensive Timken bearing, but at a much more affordable price!! Learn MoreExcl. Tax: £23.50 Incl. Tax: £28.20 -
S1 Wheel Bearing (TIMKEN)
Lotus S1 Timken Wheel Bearing. Highest quality bearing for all models of S1 Elise and Exige. Each bearing is supplied with two of the correct Circlips (No drive shaft nut supplied) These bearings are produced by Timken, an OEM supplier of bearings Equivalent to Lotus part number A111C6002F Learn MoreExcl. Tax: £39.49 Incl. Tax: £47.39 -
S2 Hub / Wheel Bearing with speed sensor
S2 Hub / Wheel Bearing for cars with ABS made by SKF (OEM) Cars with ABS braking use four of these bearings. S2 cars without ABS use one of these bearings on the L/H rear wheel as a speed sensor for the speedometer signal. same as Lotus part number A117D6005F Lotus price £105.96 Learn MoreExcl. Tax: £99.95 Incl. Tax: £119.94 -
S2 Hub / Wheel Bearing without speed sensor
S2 Hub / Wheel Bearing Learn MoreExcl. Tax: £79.50 Incl. Tax: £95.40 -
S3 Elise Hub / Wheel Bearing
S3 Elise Hub / Wheel Bearing for cars with ABS. (Complete with speed sensor) High quality SFK bearing pack as used by lotus Same as Lotus part number A120D6009F Lotus price £118.00 + vat For cars with Bosch ABS system (All S3 Elise, also S2.5 2011 MY) Learn MoreExcl. Tax: £98.50 Incl. Tax: £118.20 -
Seriously Lotus Wishbone Bush kit
Wishbone Bush Kit. A complete wishbone bush kit consisting of 14 Long and 4 Short Seriously Lotus bushes. These bushes are a cost effective alternative to the expensive OE Lotus bushes. Lotus supply three differant bushes for your wishbones, 4 short in the rear suspension lower arm front pivot (2 pairs) 2 Long in the front suspension upper arm rear pivot. (soft) 12 Long in the remaining pivots (standard hardness) Fits all 4 cylinder Elise and Exige models as well as VX220 and Europa etc Our kit does NOT have the 'soft' bush as we found a slight improvement in the control of the cars geometry by fitting the slightly harder bush in all the pivot points. Our bushes are ideal to repalce standard bushes or an upgrade, when the harshness of solid type bushes is not desireable! Learn More -
Seriously Lotus Wishbone Bushes (Singles)
Wishbone Bushes. Lotus supply three differant bushes for your wishbones, 4 short in the rear suspension lower arm front pivot (2 pairs) 2 Long in the front suspension upper arm rear pivot. (soft) 12 Long in the remaining pivots (standard hardness) Our bushes do not have the 'soft' bush as we found a slight improvement in the control of the cars geometry by fitting the slightly harder bush in all the pivot points.However we can supply the soft Lotus bush should it be required! Our bushes are ideal to repalce standard bushes or an upgrade, when the harshness of solid type bushes is not desireable! Learn MoreExcl. Tax: £10.95 Incl. Tax: £13.14 -
Steering Rack Phosphor Bronze Cups
Two Phosphor Bronze Cups for the Aluminium Steering Rack. The Bronze cups are a direct replacement for the standard Nylon cup, which can fail in extreme cicumstance such as heavy track work with sticky tyres. Learn MoreExcl. Tax: £17.95 Incl. Tax: £21.54 -
SuperPro Polyurethane Anti Roll Bar Bushes
SuperPro Polyurethane Anti Roll Bar Bushes Suits all models and derivatives of Elise, Exige and VX220 with Alloy ARB mountings and the 19mm Roll Bar A direct replacement for the factory soft rubber bushes fitted to the Anti Roll Bar mountings. Stiffer bushes enhance the handling characteristics of your Lotus by maintaining the same level of hardness irrespective of load in comparison to rubber. The resilience of SuperPro bushings allow them to return to their cast shape after compression allows better control of noise, vibration and hardness in a vehicle. The fine tolerances on the bushings provide better road handling, increased tyre life, more responsive steering, and longer service life of suspension components. Each Kit Contains 2 x Polyurethane bushes Learn MoreExcl. Tax: £26.00 Incl. Tax: £31.20 -
SuperPro Polyurethane Suspension Bushes
SuperPro Polyurethane Suspension Bushes Suits all models and derivatives of Elise, Exige and VX220 A direct replacement for the factory rubber bushes fitted to the wishbones. Stiffer bushes enhance the handling characteristics of your Lotus by maintaining the same level of hardness irrespective of load in comparison to rubber. The resilience of SuperPro bushings allow them to return to their cast shape after compression allows better control of noise, vibration and hardness in a vehicle. The fine tolerances on the bushings provide better road handling, increased tyre life, more responsive steering, and longer service life of suspension components. The special design of these bushes results in reduced rotational friction Each Kit Contains 32 x Polyurethane bushes (Two in each bush location) 16 x Steel inserts 16 x castor washers Learn MoreExcl. Tax: £226.95 Incl. Tax: £272.34