You have no items in your shopping cart.
Search results for 'Fuel pump'
-
Evora S V6 Komo-Tec 460 Kit (Not 400 Series)
Evora S V6 Komo-Tec 460 Kit (Not 400 Series) Performance Data EV460: approx. 455 hp / 480 Nm (IPS: ca 448 hp / 470 Nm) Performance Data Series: approx. 350 hp / 400 Nm (factory data) EV460, the first Exige V6 with water-cooled intercooler The main difference between the EV460 to the EV430 system is the water-cooled intercooler. The efficient cooling of the charge air, higher performance can be achieved without compromising the durability of the engine. Objective in the EX460 development was a high-efficiency charge-air cooling, minimum charge pressure losses and low component weight in conjunction with a smaller cross section. We were able to meet all requirements. To integrate an efficient intercooler core into the existing charger system, it was necessary to replace the original intake manifold to a completely newly developed component. The new intake manifold is made of milled aluminium from a solid and takes the intercooler, injectors and the supercharger. By intercooling it was now possible for us to optimize the boost pressure and the ignition timing to thus achieve an output of 455 hp, particularly noteworthy is a maximum torque of 490 Nm. By using the optimized standard supercharger, a significant improvement in power and torque in the mid rev range is achieved. This is due to the supercharger is working more efficiently. The thermal load on the engine-specific components decreases due to the lower charge air temperature. The supercharger is the standard component but with a charge cooler system . At the front of the vehicle we install a heat exchanger cooler to cool down the water for the intercooler core (in the intake manifold). The water circulation is powered by an electrical water pump. Key Benefits: Reduction of intake air temperature (cooled/uncooled) of approx. 35°C Boost-pressure lost by radiator core only 0.03 bar at 0.6 bar boost-pressure Minimum weight increase of 4.6kgs incl. heat-exchanger (without water) Increasing Power (+105hp) and much more torque (+80Nm) Phase EV460 consisting of: KT460 Carbon Airbox System with K&N sports air filter Modified pulley Stainless steel manifold with optimized pipe lengths 200cpsi Sports Catalyst HJS (Main Catalyst) Oxygen sensor extension-cable Optimization ECU-Software EV460 (ignition, injection characteristics and camshaft phase adjustment) EV460 water-to-air charge-cooling system consisting of: Heat exchanger cooler in vehicle front Electric water pump Aluminium water tank for charge cooler Complete aluminium intake manifold with integrated charge cooler and injector-holder, black anodized Water hoses Price includes installation at our workshop in East Yorkshire CAUTION: Kit requires the use of at least (or higher quality) fuel Super Plus 98Ron NOT AVAILABLE FOR MAIL ORDER Learn MoreExcl. Tax: £9,625.00 Incl. Tax: £11,550.00 -
Exige V6 Komo-Tec 460 Kit (V6S/350/380)
Exige V6 Komo-Tec 460 Kit (V6S/350/380) Performance Data EX460: approx. 455 hp / 480 Nm (IPS: ca 448 hp / 470 Nm) Performance Data Series: approx. 350 hp / 400 Nm (factory data) EX460, the first Exige V6 with water-cooled intercooler The main difference between the EX460 to the EX430 system is the water-cooled intercooler. The efficient cooling of the charge air, higher performance can be achieved without compromising the durability of the engine. Objective in the EX460 development was a high-efficiency charge-air cooling, minimum charge pressure losses and low component weight in conjunction with a smaller cross section. We were able to meet all requirements. To integrate an efficient intercooler core into the existing charger system, it was necessary to replace the original intake manifold to a completely newly developed component. The new intake manifold is made of milled aluminium from a solid and takes the intercooler, injectors and the supercharger. By intercooling it was now possible for us to optimize the boost pressure and the ignition timing to thus achieve an output of 455 hp, particularly noteworthy is a maximum torque of 490 Nm. By using the optimized standard supercharger, a significant improvement in power and torque in the mid rev range is achieved. This is due to the supercharger is working more efficiently. The thermal load on the engine-specific components decreases due to the lower charge air temperature. The supercharger is the standard component but with a charge cooler system . At the front of the vehicle we install a heat exchanger cooler to cool down the water for the intercooler core (in the intake manifold). The water circulation is powered by an electrical water pump. Key Benefits: Reduction of intake air temperature (cooled/uncooled) of approx. 35°C Boost-pressure lost by radiator core only 0.03 bar at 0.6 bar boost-pressure Minimum weight increase of 4.6kgs incl. heat-exchanger (without water) Increasing Power (+105hp) and much more torque (+80Nm) Phase EX460 consisting of: KT460 Carbon Airbox System with K&N sports air filter Modified pulley Stainless steel manifold with optimized pipe lengths 200cpsi Sports Catalyst HJS (Main Catalyst) Oxygen sensor extension-cable Optimization ECU-Software EX460 (ignition, injection characteristics and camshaft phase adjustment) EX460 water-to-air charge-cooling system consisting of: Heat exchanger cooler in vehicle front Electric water pump Aluminium water tank for charge cooler Complete aluminium intake manifold with integrated charge cooler and injector-holder, black anodized Water hoses Price includes installation at our workshop in East Yorkshire CAUTION: Kit requires the use of at least (or higher quality) fuel Super Plus 98Ron NOT AVAILABLE FOR MAIL ORDER Learn MoreExcl. Tax: £9,295.00 Incl. Tax: £11,154.00
