Toyota Drivetrain

Exige V6 Komo-Tec 460 Kit (V6S/350/380) Performance Data EX460: approx. 455 hp / 480 Nm (IPS: ca 448 hp / 470 Nm) Performance Data Series: approx. 350 hp / 400 Nm (factory data) EX460, the first Exige V6 with water-cooled intercooler The main difference between the EX460 to the EX430 system is the water-cooled intercooler. The efficient cooling of the charge air, higher performance can be achieved without compromising the durability of the engine. Objective in the EX460 development was a high-efficiency charge-air cooling, minimum charge pressure losses and low component weight in conjunction with a smaller cross section. We were able to meet all requirements. To integrate an efficient intercooler core into the existing charger system, it was necessary to replace the original intake manifold to a completely newly developed component. The new intake manifold is made of milled aluminium from a solid and takes the intercooler, injectors and the supercharger. By intercooling it was now possible for us to optimize the boost pressure and the ignition timing to thus achieve an output of 455 hp, particularly noteworthy is a maximum torque of 490 Nm. By using the optimized standard supercharger, a significant improvement in power and torque in the mid rev range is achieved. This is due to the supercharger is working more efficiently. The thermal load on the engine-specific components decreases due to the lower charge air temperature. The supercharger is the standard component but with a charge cooler system . At the front of the vehicle we install a heat exchanger cooler to cool down the water for the intercooler core (in the intake manifold). The water circulation is powered by an electrical water pump. Key Benefits: Reduction of intake air temperature (cooled/uncooled) of approx. 35°C Boost-pressure lost by radiator core only 0.03 bar at 0.6 bar boost-pressure Minimum weight increase of 4.6kgs incl. heat-exchanger (without water) Increasing Power (+105hp) and much more torque (+80Nm) Phase EX460 consisting of: KT460 Carbon Airbox System with K&N sports air filter Modified pulley Stainless steel manifold with optimized pipe lengths 200cpsi Sports Catalyst HJS (Main Catalyst) Oxygen sensor extension-cable Optimization ECU-Software EX460 (ignition, injection characteristics and camshaft phase adjustment) EX460 water-to-air charge-cooling system consisting of: Heat exchanger cooler in vehicle front Electric water pump Aluminium water tank for charge cooler Complete aluminium intake manifold with integrated charge cooler and injector-holder, black anodized Water hoses Price includes installation at our workshop in East Yorkshire CAUTION: Kit requires the use of at least (or higher quality) fuel Super Plus 98Ron NOT AVAILABLE FOR MAIL ORDER Learn More

Exige V6 Front Suspension Refresh Kit Kit includes the following components 4 Suspension ball joints 8 Suspension arm bushes (Seriously Lotus bushes) 2 Track rod ends with nyloc nuts 2 Antiroll bar drop links with nyloc nuts 4 Steering arm plinth bolts 10.9 grade Shock absorber top and bottom nuts bolts and washers (4 bolts for two dampers) Suspension arm pivot nuts bolts and washers( 4 suspension arms = 8 bolts) Learn More

Gator Back Supercharger drive belt for all 350 and V6S Exige and Evora Genuine Lotus part () Learn More

Gator Back Supercharger drive belt for all 400/410/430 Exige, Evora and 3Eleven Genuine Lotus part () Learn More

Exige V6 and Evora Oil Cooler Radiator A138K0002F Learn More

Exige V6 and Evora OE Oil Filter (Toyota) Complete with special filter drain tool and O rings Lotus part number A132E6399S Lotus price £26.90..... Learn More

Aluminium baffled sump for the Exige V6 and Evora Supplied with hardware fittings (Bolts) Boss fitted to take oil temp sensor 1/8 NPT (Blanking plug supplied in hardware) Multi directional baffles for improved oil control. ( as seen in the Lotus baffled sumps) Easy installation with all fixing being accessible from outside the sump. Learn More

Exige V6 430 Komo-Tec 475 Kit Performance data EX475 approx. 475 hp / 490 Nm (manual gearbox) • Performance data "Cup 430" approx 436 hp / 440 Nm (factory data Lotus Cars) The Exige Cup 430 has been delivered with 436 hp as factory spec. In order to give the vehicle the perfect dynamics, Komo-Tec have developed the "Cup EX475" performance phase. Through the use of special stainless steel manifolds (developed by Komo-Tec) with optimized tube lengths and diameters, a HJS-200-cpsi sports catalyst integrated in the y-pipe, as well as the KT500 Carbon-Airbox with increased airflow and optimised software-upgrade, They were able to increase the maximum output by about 40 hp. This allows the engine to rev more freely and have a significant increase in torque. Main advantages: • Powerful upgrade with a high fun-factor • Significantly more torque (+50 Nm) and power (+40 hp) to the standard car Performance phase "Cup EX475" consisting of: • KT500 Carbon-Airbox • Stainless steel manifold with optimized tube lengths and diameters • Y-pipe with optimized diameter incl. 200cpsi HJS Sportcatalyst • Oxygen sensor cable extension • Optimization of the standard software file DEx475a (Ignition, injection maps and camshaft phase adjustment) Includes installation at our workshop in East Yorkshire WARNING: Kit requires the use of at least (or high quality) Super Plus fuel 98 Ron NOT AVAILABLE MAIL ORDER Learn More

Exige V6 410/430 Evora Komo-Tec Stainless Steel Sports Exhaust (switchable) High Quality stainless steel switchable exhaust silencer for Exige and Evora 400 series cars. This silencer achieves a sporty and crisp sound and less weight than the original. The overall aim was to create a sports silencer which achieved three targets: Less weight than standard (15.9kg standard/13.2kg Komo-Tec) A significant difference in sound between open and closed exhaust flap. No power loss between open/closed exhaust flap. During testing on the dyno Komo-Tec found that some products on the market have significant differences in power output with the flap in the open or closed position. This system produces the same power whether the valve is open OR closed. The silencer is a direct 1-to-1 replacement for the original/standard part. The original switch control for the exhaust continues to work as normal. The tailpipes have a diameter of 85mm and a perforated inner tube. Two exhaust tip styles are available Stainless tailpipes or a carbon-version. (See images) Learn More

Exige V6 410 Komo-Tec EX435 Performance Phase "Sport EX435" • Performance data "Sport EX435": approx. 435 hp / 450 Nm (manual gearbox) • Performance data "Sport 410" Series: approx. 416 hp / 420 Nm (factory data Lotus Cars) This is the upgrade for your Exige Sport 410 to Cup 430 specification. With this upgrade, Komo-Tec optimise the software only. This results in a better performance (about + 20 hp) and an increase in torque. There are no further updates necessary and the software can be downloaded very easily with the supplied OBD cable (not possible with Apple® software)! Main advantages: • easy to upgrade • significantly more torque (+30 Nm) and power (+20 hp) to the standard car Performance phase "Sport EX435" consisting of: • Optimization of the standard software to DEx435a (Ignition, injection maps and camshaft phase adjustment) • OBD-Software Cable WARNING: Kit requires the use of at least (or high quality) Super Plus fuel Also requires a car specific programming tool (Stays with car) please enquire for details and costs NOT AVAILABLE MAIL ORDER Learn More

Exige V6 410 Komo-Tec 475 Kit Performance data EX475 approx. 475 hp / 490 Nm (manual gearbox) • Performance data "Exige 410" approx 416 hp / 410 Nm (factory data Lotus Cars) The Exige 410 has been delivered with 416 hp as factory spec. In order to give the vehicle the perfect dynamics, Komo-Tec have developed the "Exige EX475" performance phase. Through the use of special stainless steel manifolds (developed by Komo-Tec) with optimized tube lengths and diameters, a HJS-200-cpsi sports catalyst integrated in the y-pipe, as well as the KT500 Carbon-Airbox with increased airflow and optimised software-upgrade, They were able to increase the maximum output by about 40 hp. This allows the engine to rev more freely and have a significant increase in torque. Main advantages: • Powerful upgrade with a high fun-factor • Significantly more torque (+80 Nm) and power (+60 hp) to the standard car Performance phase "Cup EX475" consisting of: • KT500 Carbon-Airbox • Stainless steel manifold with optimized tube lengths and diameters • Y-pipe with optimized diameter incl. 200cpsi HJS Sportcatalyst • Oxygen sensor cable extension • Optimization of the standard software file DEx475a (Ignition, injection maps and camshaft phase adjustment) Includes installation at our workshop in East Yorkshire ECU Programming tool with 475 Code supplied to customer WARNING: Kit requires the use of at least (or high quality) Super Plus fuel 98 Ron NOT AVAILABLE MAIL ORDER Learn More

Exige V6 & Evora Handbrake Assembly C132J0145F Genuine Lotus supplied part Two required per car, this assembly is for one side, includes the back plate, brake shoes. retaining clips, springs etc Learn More

Exige V6 Rear Suspension Spherical Joint B132D6006H Three joints used per side on Exige Two joints per side on Evora (Lower outer joint is the larger B132D6005H) Genuine OEM part Learn More

Exige And Evora 400 Series Oil Cooler A132K0304F Also 2018 onwards Exige 350 Learn More

Exige / Evora V6 Komo-Tec Quiet Exhaust Komo-Tec stainless steel Track-Exhaust *low noise* for Exige / Evora V6 Specially developed for use on the race track and today's volume restrictions on track days, this rear silencer is trimmed to be "quiet". This is achieved by an additional second-silencer. However it still has (within its possibilities) a sporty and robust sound. A valve control is not used, although Komo-Tec have technically ensured that the exhaust back-pressure also harmonizes in combination with their performance increases. The rear silencer is available for the both of the factory pipe diameters (350 and 400 cars) and can be installed without any conversion. Weight comparison: Lotus original rear silencer: Almost 16 kg Lotus Track rear silencer: Over 13 kg KT * low-noise * track rear silencer: Under 12 kg Learn More

Evora And Exige Wheel Bearing (Hub) Wheel bearing/Hub assembly for Evora (All models) Front and Rear, Exige V6 Rear Lotus part number A132D0021F Learn More

Evora Rear Suspension Spherical Joint B132D6005H Genuine Lotus part Learn More

Evora V6 400/410/430 Komo-Tec 475 Kit Performance data EV475 approx. 475 hp / 490 Nm (manual gearbox) • Performance data "410" approx 416 hp / 440 Nm (factory data Lotus Cars) The Evora 400/410/4300 has been delivered with 400-436 hp as factory spec. In order to give the vehicle the perfect dynamics, Komo-Tec have developed the "Evora EV475" performance phase. Through the use of special stainless steel manifolds (developed by Komo-Tec) with optimized tube lengths and diameters, a HJS-200-cpsi sports catalyst integrated in the y-pipe, as well as the KT500 Carbon-Airbox with increased airflow and optimised software-upgrade, They were able to increase the maximum output by about 40-60 hp(Depending on model)). This allows the engine to rev more freely and have a significant increase in torque. Main advantages: • Powerful upgrade with a high fun-factor • Significantly more torque (+50 Nm) and power (+40 hp) to the standard car Performance phase " EV475" consisting of: • KT500 Carbon-Airbox • Stainless steel manifold with optimized tube lengths and diameters • Y-pipe with optimized diameter incl. 200cpsi HJS Sports catalyst • Oxygen sensor cable extension • Optimization of the standard software file DEv475a (Ignition, injection maps and camshaft phase adjustment) Includes installation at our workshop in East Yorkshire ECU Programming tool with 475 Code supplied to customer WARNING: Kit requires the use of at least (or high quality) Super Plus fuel 98 Ron NOT AVAILABLE MAIL ORDER Learn More

Evora V6 400/410 Komo-Tec EV435Performance Phase "Sport EV435" • Performance data "Sport EV435": approx. 435 hp / 450 Nm (manual gearbox) • Performance data "Sport 410" Series: approx. 416 hp / 420 Nm (factory data Lotus Cars) This is the upgrade for your Evora 400 and Sport 410 to 430 specification. With this upgrade, Komo-Tec optimise the software only. This results in a better performance (about + 20 hp) and an increase in torque. There are no further updates necessary and the software can be downloaded very easily with the supplied OBD cable (not possible with Apple® software)! Main advantages: • easy to upgrade • significantly more torque (+30 Nm) and power (+20 hp) to the standard car Performance phase "Sport EV435" consisting of: • Optimization of the standard software to DEV435a (Ignition, injection maps and camshaft phase adjustment) • OBD-Software Cable WARNING: Kit requires the use of at least (or high quality) Super Plus fuel Also requires a car specific programming tool (Stays with car) please enquire for details NOT AVAILABLE MAIL ORDER Learn More

Evora S1 N/A Spark Plugs 6 Genuine Toyota supplied Iridium long life spark plugs for the S1 Evora N/A These plugs have a service interval of 54,000 miles (87500 km) Learn More

Evora S V6 Komo-Tec 460 Kit (Not 400 Series) Performance Data EV460: approx. 455 hp / 480 Nm (IPS: ca 448 hp / 470 Nm) Performance Data Series: approx. 350 hp / 400 Nm (factory data) EV460, the first Exige V6 with water-cooled intercooler The main difference between the EV460 to the EV430 system is the water-cooled intercooler. The efficient cooling of the charge air, higher performance can be achieved without compromising the durability of the engine. Objective in the EX460 development was a high-efficiency charge-air cooling, minimum charge pressure losses and low component weight in conjunction with a smaller cross section. We were able to meet all requirements. To integrate an efficient intercooler core into the existing charger system, it was necessary to replace the original intake manifold to a completely newly developed component. The new intake manifold is made of milled aluminium from a solid and takes the intercooler, injectors and the supercharger. By intercooling it was now possible for us to optimize the boost pressure and the ignition timing to thus achieve an output of 455 hp, particularly noteworthy is a maximum torque of 490 Nm. By using the optimized standard supercharger, a significant improvement in power and torque in the mid rev range is achieved. This is due to the supercharger is working more efficiently. The thermal load on the engine-specific components decreases due to the lower charge air temperature. The supercharger is the standard component but with a charge cooler system . At the front of the vehicle we install a heat exchanger cooler to cool down the water for the intercooler core (in the intake manifold). The water circulation is powered by an electrical water pump. Key Benefits: Reduction of intake air temperature (cooled/uncooled) of approx. 35°C Boost-pressure lost by radiator core only 0.03 bar at 0.6 bar boost-pressure Minimum weight increase of 4.6kgs incl. heat-exchanger (without water) Increasing Power (+105hp) and much more torque (+80Nm) Phase EV460 consisting of: KT460 Carbon Airbox System with K&N sports air filter Modified pulley Stainless steel manifold with optimized pipe lengths 200cpsi Sports Catalyst HJS (Main Catalyst) Oxygen sensor extension-cable Optimization ECU-Software EV460 (ignition, injection characteristics and camshaft phase adjustment) EV460 water-to-air charge-cooling system consisting of: Heat exchanger cooler in vehicle front Electric water pump Aluminium water tank for charge cooler Complete aluminium intake manifold with integrated charge cooler and injector-holder, black anodized Water hoses Price includes installation at our workshop in East Yorkshire CAUTION: Kit requires the use of at least (or higher quality) fuel Super Plus 98Ron NOT AVAILABLE FOR MAIL ORDER Learn More

Evora S Supercharger Drive Belt Not for Evora 4** Series or Evora NA Lotus part number B132E6500H Learn More

Evora Hi Capacity Alloy Radiator Learn More

Air Conditioning Condenser for the Evora and Evora S. not 400/410/430 CARS OEM supplied part Lotus part number is B132P0001F Learn More