Drivetrain

Lambda Sensor This high quality Bosch Lambda sensor should not be confused with the cheap alternatives that are available! These Bosch Lambda Sensors are as supplied by Lotus and is the same as Lotus part number A117E6007F The same sensor is used for both the pre Catalyst and post Catalyst on the following models 2-11 S2 Elise ( K series) S2 Elise (Toyota - all models inc 2011 onwards) S2 Exige (Toyota - all models) Evora Exige V6s-430Cup S3Elise Learn More

LITE↯BLOX Battery Charger Input Voltage: 100 - 240 V, 50 / 60 Hz Primary plug: EURO plug Charging characteristic: CCCV Number of cells/cell-lines: 4 Battery nominal voltage: 12,8 - 13,2V Charging end voltage: 14,4V Max. charging current: 7A > Indication charging > Short-circuit protection > Wrong polarity protection > Over charging protection Learn More

LITE↯BLOX LB20XX Lightweight Battery (New 2022 version) 2022 version now has an alloy mounting frame tp allow fitment to a standard battery tray (optional alloy battery tray saves an addition 1.0 kgs on an Exige V6) NOT AVAILABLE FOR INTERNATIONAL DELIVERY The innovative LITE↯BLOX LB20XX battery is approximately 2.0kg and comes in a thermally and mechanically decoupled CFRP housing with an integrated base plate and intelligent power electronics, controllable via an app - made in Germany:

Features

Saves up to 17kg in weight compared to the comparable series starter battery as fitted to the Exige V6 Plug'n'play exchange & suitable for almost every vehicle wireless interface for status diagnosis via smartphone app Maintenance-free thanks to intelligent electronics with active protection against misuse and overloading caused by: over/under voltage, over/under current, over/under temperature & short circuit Marginal self-discharge when not in use (if switched off via IKOS*) Maximum safety through premium components Proven in professional motorsport (DMSB homologated / FIA F3 certified) Developed and handcrafted in Germany Innovative power electronics for disconnecting via smartphone app in two modes: 1.) IKOS - Intelligent Kill-Operation-Switch: complete disconnection of the LITE↯BLOX from the vehicle in the event of overload or via smartphone (alternative to the disconnect switch for longer downtimes) 2.) AVAT - Active Vehicle Anti Theft (active anti-theft device): all electrical consumers are still supplied with energy when stationary, but as soon as an unauthorized start is made, the LITE↯BLOX permanently disconnects -in the event of an increased load, the power electronics disconnects permanently within milliseconds, so that the power supply for starting is blocked and the engine cannot be started (although this blockage can only be released again by the user via the app).

Application

Motorisation: 4-8 cylinders (2500-4000cc***) suitable for everyday use (vehicle downtime 2-4 weeks*) Performance & motor sports vehicles (sprint, rally, hill climb, track tool, time attack, drag racing, Formula 3 FIA F3) / tuning / caravan, mobile home / car hifi / boat Compatible with intelligent alternator control (IBS / IAC) - training required in advance

Technical specifications

Weight: 20XXg** (including pole terminals) Dimensions: 202 x 123 x 100mm (lxwxh) Voltage: 13.2V / 15.2V (nom / max) Capacity: 12.5Ah / 35-55Ah (nom / Pb-eq ) Discharge current: 250A / 750A* (cont / peak @RT) Operating temperature: -20 to +80°C Service life: 3 to 5x the standard vehicle battery* Connection: plug'n'play via car pole terminals (DIN) or ring cable lugs (M6) Certificates: compliant according to: 2001/95/EG, 2011/65/EU, 2006/66/EG, 2008/104/EU, UN38.3 Scope of delivery: LITE↯BLOX + pole terminals (aluminium) + fastening material + accessories (see figure) Aluminium battery tray available for V6 Exige (As used on all V6 Exige with lightweight battery fitted at the factory) . A special lithium charger MUST be used, a standard charger will damage the battery. App for android is here https://play.google.com/store/apps/details?id=de.liteblox.litebloxreader2 App for IOS is here https://apps.apple.com/de/app/liteblox-remote/id1343292009 Learn More

Lotus 'Quiet' Track Silencer (400 Series cars) Lotus part number A138S0100S Fits all Exige and Evora 400 410 and 430 Models (Will fit a 3Eleven with modification) This exhaust silencer does NOT have a valve Special order part, (Currently on back order with lotus) Learn More

Lotus Exige 390/400/410/420/430 Charge Cooler Header Tank Latest spec Lotus chargecooler header tank. Cap is an extra. Learn More

Lotus Exige V6 Left Hand Driveshaft Fits all Exige and 3Eleven models with manual gearbox Learn More

Lotus Exige V6 Right Hand Driveshaft (Long) Fits all Exige and 3Eleven models with manual gearbox Learn More

Lotus V6 Uprated Clutch and Flywheel Kit (4** Series) Kit includes 400 Series uprated Flywheel 400 Series Hi-Torque clutch cover 400 Series Hi Torque drive plate Release bearing Release bearing carrier Clutch cover fitting bolts These are the parts as fitted by lotus to the 400/410 and 430 cars. This clutch and flywheel are upgraded to 240mm from the 228mm used on the 350 and 380 cars. Direct replacement for all V6 Models Learn More

Magnetic Gearbox Drain Plug (All Toyota models) Fits the gearbox of all Toyota powered models Learn More

Magnetic Sump Plug Fits all Toyota powered models with the following engines 1ZZ, 2ZZ 1ZR,2ZR, also fits Exige and Evora 2GR-FE inc the Evora 400 Learn More

Oil Filter Toyota 1ZZ Engine and 2ZR engine Learn More

Oil Filter Toyota 2ZZ Engine All models with VVTi engine.(Not Elise S) Learn More

Oil Filter K Series Learn More

Petronas Syntium 3000 AV 5W-40 Engine oil 5Ltrs An approved oil for your Lotus Supplied as 5 litres Learn More

Powerflex engine mount insert kits (Black) S2 Toyota Learn More

Powerflex engine mount insert kits ( Yellow) S2 Toyota Learn More

Pro-Alloy 211 Alloy Intercooler Boost Pipes Learn More

Pro-Alloy Exige V6 Radiator Learn More

Pro-Alloy large capacity anti surge fuel tank for all Elise ,Exige and VX220 derivatives Learn More

Pro-Alloy large capacity anti surge fuel tank for all Elise ,Exige and VX220 derivatives Learn More

Pro-Alloy Lightweight Exige Intercooler Pipes to replace the original heavy cast alloy items fitted as standard, which weigh over 2Kgs with an internal diameter of 57mm and a rough cast internal finish. These Pro-alloy boost pipes are hand crafted and weigh an amazing 705grams, have an internal diameter of 59mm with a smooth internal bore. Not only are they much lighter the extra internal diameter and smooth bore will aid engine breathing. It is also worth remembering that the reduction of almost 1.3 kgs is from high up above the engine!!!! A nice addition to any SC Exige engine bay. Also available in satin black to special order!! Learn More

Pro-Alloy Radiator single Pass 45mm Learn More

Pro-Alloy Radiator Triple Pass 45mm Learn More

Twin Spal fans fitted to laser cut mount frame. Designed to bolt straight on to the original mounting points on the top side of the water radiator, this fan kit is an easy fit on the S2 Elise/Exige. By top mounting the fans you can clean up the ambient air flow to the water radiator as the fans themselves block and restrict the air flow at high speed.This problem is compounded when an aftermarked charge cooler pre rad is added to the cooling package. Supplied without electrical connector plug (Use connectors from old fans) Will fit cars with /without air conditioning. Learn More