Full Catalogue

Yokohama V105 Tyres (Full set) 195/50/R1684W x 2 225/45/R1791W x 2 (With correct MO markings as specified by Lotus cars) These latest approved tyre for the Lotus Elise S2/S3 These are the correct W rated tyres as used by lotus on the S3 Elise. Learn More

Wishbone Bush Assembly Lubricant P-80 Emulsion is specifically formulated to provide a temporary lubrication for the installation of bushes etc The lubrication properties only work when the lubricant is wet. Learn More

Wash Wipe Switch As per photograph, a replacement wash wipe column swtich. Fits all models of Elise and Exige. Equivalent to Lotus part number A100M6049F Learn More

Wheel Arch Liner Clip / Scrivet. Learn More

VX220 Toe Link Kit (Tapered Uprights) Learn More

VX220 Toe Link Kit (Earlier Cars With Parallel Uprights) Learn More

A suspension refresh kit consisting of 1x full set of Seriously Lotus wishbone bushes or 1 x set of Superpro suspension bushes 8x Suspension Ball Joints 2x Track Rod Ends (Lotus OEM) 2x Antiroll bar drop links 1x Suspension bolt kit including damper bolts. All the main components required to carry out a suspension refresh. Learn More

Engine mounting insert kit for the front and rear engine mountings An advisable upgrade to protect your two engine mountings that are prone to failure These high quality Powerflex mountings simply fill the voids in the standard mountings, which significantly reduces engine movements under hard acceleration and braking. An absolute must for any car being used on the circuit. Due to reduced engine movements improved gear change is also a nice side effect found by many customers. Due to the engine mountings being much stiffer with these inserts installed, some additional engine vibration may be evident. 2 Kits requires per car, Although 1 kit may be used. Each kit contains 2 inserts Learn More

Right hand Vertical link for cars with Knock on wheels Learn More

Right hand Vertical link for cars with Blot on wheels Learn More

Left hand Vertical link for cars with Knock on wheels Learn More

Left hand Vertical link for cars with Blot on wheels Learn More

Low Rise Vehicle Ramps are a great solution to a problem commonly faced by many Lotus owners and Race teams, They are ideal for use on lowered vehicles and race cars because the Low Rise Vehicle Ramps elevate the car an additional 70mm off the ground, allowing for easier and safer access for trolley jacks The Vehicle Ramps are produced from a durable black Polypropylene (PP) and have a combined weight loading capacity of 5000kg as a pair. The ramps are sold in pairs. Height: 70mm/80mm Width: 200mm Length: 700mm Weight: 4kg (per pair) Loading Capacity: 5000kg (per pair) Learn More

V6 Exige/Evora/3Eleven Air Filter As fitted to all V6 Exige, Evora and 3Eleven cars Lotus part number A132E6324S Learn More

V6 Exige and 3Eleven front and rear caliper mounting bolt. M12 x 70mm lobe head bolt. These are loctited into the uprights, and have been known to damage the threads on removal. Price as a single bolt, 8 fitted in total. Lotus part number B138J6001F Learn More

V6 Exige Ultralight Forged Alloy Wheels These are the same size and offset as used on the Exige Cup 430. The lotus supplied wheels originally used a 3mm spacer to achieve the ET32 Offset (ET35 with 3mm spacer = ET32) These new wheels are ET32 WITHOUT a spacer so eligible for race use where allowed A set of four Ultralight forged alloy wheels for the Exige V6 Coupe and Roadster. DOES NOT INCLUDE CENTRE CARS (available as an option) These new wheels are one of the lightest wheels available in 7.5 x17 and 10 x 18 sizes. Very very light but incredibly strong. Made in the UK Direct fitment to the Exige V6 using the original bolts Available in Satin Black. Front wheel 7.5 x 17 ET26 (Approx 6.8 Kgs) (Lotus cast wheel 8.1kgs approx.) Rear wheel 10 x 18 ET32 (Approx 9.5 Kgs) (Lotus cast wheel 11.6 kgs approx.) Uses the original Lotus Exige V6 wheel centre caps ( 4 centre caps available as an option) Learn More

V6 Exige Rear Anti Roll Bar Drop Link The rear drop inks on the V6 Exige are different right and left. Please specify which one is required from the options to the left A132D4009F/A132D4010F Plus option to add 2 locknuts per drop link - these tend to be seized and need to be cut off Learn More

A set of 6 NGK spark plugs for all Supercharged V6 models Lotus part number A132E6503F NGK Ref ILFR7B

Not suitable for non-supercharged Evora - the correct ones for N/A cars can be found here https://www.seriouslylotus.com/evora-s1-n-a-spark-plugs

Learn More

V6 Exige Cup Sump Baffle Service Kit - Fabricated Sump - not early Cup cast alloy sump As fitted to Lotus Cup models - designated by the lower sump being painted red. Should be changed every 18,000 miles (30,000 km) or 24 months. Kit includes 5 gate flaps, sump plug and washer. Will require sump removal, cleaning of faces and refitting with appropriate sealant. Learn More

V6 Exige and Evora Wheel Stud Conversion Kit Learn More

20 Splined wheel bolts with a moving washer and the correct spline tool. Learn More

20 Splined wheel bolts with a moving washer and the correct spline tool. Learn More

Uprated fuel pump retain cap for Toyota engined cars using either uprated Denso pump or a Walbro pump. Allows the rubber fuel pump 'foot' to be retained without the need to cut the original plastic retaining cap or using the lock wire methods of retaining the fuel pump. We have designed this alloy cap to allow the fitment of the Denso pump as used in the Cup260 and 2-11's as well as the 190 and 255 Walbro uprated pumps. Learn More

Ultra Lightweight billet steel flywheel with integral tooth ring gear Suits standard type clutch. Dynamically balanced Weight: 4.007kgs One of the lightest flywheels on the market for the Toyota 2ZZ engine, Machined from a high grade steel forging. As used in our own SC Exige with a sequential gearbox!! Learn More