Full Catalogue

Ultra light Forged Wheels S2/S3 Set (4) Silver (Toyota only not K series) NOT Exige V6 2 x Front 7 x 16 ET 31 5.4 Kgs 2 x Rear 8 x 17 ET 38 7.0 Kgs Colour is Silver DOES NOT INCLUDE LOTUS WHEEL CENTRE CAPS The same dimensions as the wheel used by Lotus on the Elise Cup R, Cup 250 etc Lotus centre caps available as an option

Learn More

Ultra light Forged Wheels for S2/S3 Elise and Exige S2 (Toyota only not K series) NOT Exige V6 2 x Front 7 x 16 ET 31 5.4 Kgs 2 x Rear 8 x 17 ET 38 7.0 Kgs Colour is Matt Black DOES NOT INCLUDE LOTUS WHEEL CENTRE CAPS The same dimensions as the wheel used by Lotus on the Elise Cup R, Cup 250 etc Lotus centre caps available as an option

Learn More

Ultra light Forged Front Wheel for S2/S3 Elise and Exige S2 (Single wheel) Available in 7.0 x16 . Very very light but incredibly strong. Made in the UK Available in Satin Black. Learn More

Lotus OEM Track Rod End for the S1 S2 Elise, Exige and 211 These are also the Track Rod Ends now supplied by Lotus The original S1 Track Rod End was about 10mm shorter than this one and is no longer available from Lotus. If fitting to an early car with 2 lock nuts on the track rod, remove the thin lock nut, before refitting a single locknut and new track rod end. Supplied with the correct fine pitch nyloc nut. Why buy after market copies when you can have the one as supplied by Lotus Lotus part number ref - A117H0009F. Learn More

Track Rod End Lock Nuts A pair of track rod end lock nuts (M12 x 1.25) as used on all Elise and Exige varients Equivalent to lotus part number A111W3124F Learn More

Lotus OEM Track Rod End for the Exige V6 and 3Eleven Supplied with the correct fine pitch nyloc nut. Lotus part number B138H0006F Learn More

Toyota gearbox drain plug and filler plug sealing washer Fits the 6 speed C64 and 5 speed C56 gearboxes Learn More

Toyota Engine Sump Plug Washer Learn More

Tensioner - Seat Runner A142V0001K Sold as a pair Used to reduce the rocking movement in the drivers seat runners Learn More

Full or part Nut and Bolt kits for your suspension. Available as either just the 14 suspension pivot piont bolts (the other two use the rear toe link joint) or the 8 damper mounting bolts. Also available as a full kit. Each kit has one nyloc nut and two washers for each bolt. Learn More

A suspension refresh kit consisting of 1x full set of Seriously Lotus wishbone bushes or Superpro bushes. Also available with an upgrade to Nitron inner bearings., 8x Suspension Ball Joints 2x Track Rod Ends (S1 or S2 = OEM) 2x Our own Antiroll bar drop links 1x Suspension bolt kit including damper bolts. All the main components required to carry out a suspension refresh. Learn More

SuperPro Polyurethane Suspension Bushes Suits all models and derivatives of Elise, Exige and VX220 A direct replacement for the factory rubber bushes fitted to the wishbones. Stiffer bushes enhance the handling characteristics of your Lotus by maintaining the same level of hardness irrespective of load in comparison to rubber. The resilience of SuperPro bushings allow them to return to their cast shape after compression allows better control of noise, vibration and hardness in a vehicle. The fine tolerances on the bushings provide better road handling, increased tyre life, more responsive steering, and longer service life of suspension components. The special design of these bushes results in reduced rotational friction Each Kit Contains 32 x Polyurethane bushes (Two in each bush location) 16 x Steel inserts 16 x castor washers Learn More

SuperPro Polyurethane Anti Roll Bar Bushes Suits all models and derivatives of Elise, Exige and VX220 with Alloy ARB mountings and the 19mm Roll Bar A direct replacement for the factory soft rubber bushes fitted to the Anti Roll Bar mountings. Stiffer bushes enhance the handling characteristics of your Lotus by maintaining the same level of hardness irrespective of load in comparison to rubber. The resilience of SuperPro bushings allow them to return to their cast shape after compression allows better control of noise, vibration and hardness in a vehicle. The fine tolerances on the bushings provide better road handling, increased tyre life, more responsive steering, and longer service life of suspension components. Each Kit Contains 2 x Polyurethane bushes Learn More

Alloy Supercharger pulley in 2 sizes to fit the standard Exige S supercharger (4cylinder cars)

Does NOT fit Exige V6

The standard Exige S supercharger pulley is 3.2'' diameter. Available in the following sizes 3.0'' 2.9'' These pullies have a 27mm hexagonal boss to enable the pulley to be held whilst removing/ torque tightening the nut. Serious damage can be caused to the supercharger if the nut is removed using an impact tool.

Learn More

1 x A138E6010S 1 x A132E6514S 1 x A132E6513S 1 x A132E6515S 1 X Fixing bolts Learn More

Steering Wheel Quick Release coupling Brown and Geeson quick release as used by Lotus an the fabulous Exige V6 Cup cars Utilising a 6x70mm & 6x74mm multi-drilled PCD bolt pattern allows the quick release system to be fitted to all steering wheels with a matching bolt pattern. Learn More

Steering Wheel Adaptor (Non Air Bag Cars) Adaptor boss to allow the fitment of quick release couplings and after market steering wheels to non Air Bag cars. Suits quick release couplings with 70mm x 6 PDC fitment Bolts directly to the original steering wheel boss. Learn More

Two Phosphor Bronze Cups for the Aluminium Steering Rack. The Bronze cups are a direct replacement for the standard Nylon cup, which can fail in extreme cicumstance such as heavy track work with sticky tyres. Learn More

Steering Column Lower Shaft and Universal Joints Equivalent to Lotus part number D111H0003F Fits all S1, S2K, S2 Toyota, Europa, etc etc Comes complete with the correct high grade nuts and bolts (3 bolts 3 nuts) Learn More

Steering Arm / Upper plinth Bolt Kit. On the S2 Elise and Exige, Lotus upgraded the bolts that are used in the Steering arms on the front suspension and the Top Ball Joint Plinths on the rear suspension from 8.8 to 10.9. This kit of 10.9 cap head bolts are a must for anyone driving there S2 on the circuit. (The S1 cars with alloy uprights use 8.8 grade bolts for the steering arms and top ball joints) 4 bolts for the two front steering arms 4 bolts for the two rear top ball joint plinths Learn More

Splined Wheel Bolt Tool Fits all cars with splined wheel bolts S2 Rover, S2 Toyota, Evora, V6Exige and Europa Equivalent to Lotus part number A132G6003F Learn More

NGK Spark Plugs, as fitted to many of the Elise and Exige range at the factory. Sold in car sets of four spark plugs. The Spark plugs Supercharged Toyota engine have 'Platinum' electrodes. Learn More

NGK Spark Plugs, as fitted to many of the Elise and Exige range at the factory. Sold in car sets of four spark plugs. The Spark plugs for the K series and Supercharged Toyota engine have 'Platinum' electrodes. The spark plug used in the N/A 2ZZ Toyota engine has an 'Iridium' centre electrode. Lotus recomend that the sparkplugs in the Toyota cars are changed at 60,000 miles or 6 years, whichever arrives first. Learn More

Soft Top Tension Cable (End Adjuster) B116V0064H Learn More