Full Catalogue
-
Rear Toe-link Inner Joint All Models Without Cross Brace A117D0090S
Standard toe-link inner joint.(non cross brace) as supplied for all models of 4cyl Elise & Exige without the factory cross brace kit. Also used on the VX220's, 340R etc Ball joint toe-link inboard LH thread 10.9 grade M10 X 1.25 - 65mm long Lotus part number A117D0090S Learn MoreExcl. Tax: £29.95 Incl. Tax: £35.94 -
Rear Toe-link Inner Joint (Genuine) Cross Brace Type
Cross brace type toe-link inner joint as fitted to cars with the rear cross brace kit. LH thread (As used on S2 Exige models) Lotus part number B120D0036F Learn MoreExcl. Tax: £81.95 Incl. Tax: £98.34 -
Rear Diffuser Edging Strip
Rear diffuser edging strip in Black Sold by the metre (3 metres needed per car) Black Strip equivalent to A122A0029V Learn MoreExcl. Tax: £6.50 Incl. Tax: £7.80 -
Rear Brake Pads (Brembo Rear) Ferodo 2500
Ferodo F2500 Rear Brake Pads For the standard Brembo rear caliper As used on cars with the factory fitted fast road brake kit Learn MoreExcl. Tax: £151.75 Incl. Tax: £182.10 -
Rack Height Setting Plates
Rack height setting plates for lowered cars These items are required if the ride height of your car is lowered by more than a few millimetres. If you lower your suspension, the angle of your steering arm changes in relation to the height of the steering rack i.e. the steering rack track arm is angled upwards. Genuine Lotus Motorsport 10 notch rack setting plates will raise the steering rack by approximately 8mm and help to remove some unwanted bump steer. SUPPLIED IN PAIRS Lotus part number A111H0021F Learn MoreExcl. Tax: £9.95 Incl. Tax: £11.94 -
Pro-Alloy top mount fan kit
Twin Spal fans fitted to laser cut mount frame. Designed to bolt straight on to the original mounting points on the top side of the water radiator, this fan kit is an easy fit on the S2 Elise/Exige. By top mounting the fans you can clean up the ambient air flow to the water radiator as the fans themselves block and restrict the air flow at high speed.This problem is compounded when an aftermarked charge cooler pre rad is added to the cooling package. Supplied without electrical connector plug (Use connectors from old fans) Will fit cars with /without air conditioning. Learn More -
Pro-Alloy Radiator Triple Pass 45mm
Pro-Alloy Radiator Triple Pass 45mm Learn MoreRegular Price: £538.80
Special Price Excl. Tax: £395.00 Incl. Tax: £474.00
-
Pro-Alloy Radiator Single Pass 45mm
Pro-Alloy Radiator single Pass 45mm Learn MoreRegular Price: £522.00
Special Price Excl. Tax: £375.00 Incl. Tax: £450.00
-
Pro-Alloy Motorsport Filler Neck Assembly
Pro-Alloy Motorsport Filler Neck Assembly High Quality "Aero" style flush filler assembly for the Lotus S1/ S2 /211 The series 1&2 Lotus Elise and derivatives (including 211 and Exige series 2) with both Toyota and Rover engines have a narrow filler neck due to fuel cap design. The original filler neck is also installed with an unleaded fuel flap. Both these elopements prevent the use of TUFF JUG dry break style fuel filling systems without the use of a narrow adaptor on the dispenser which limits the fuel flow and hinders the seating of the TUFF JUG into the filler neck assembly, increasing the possibility of fuel spillage. The Pro Alloy Motorsport Filler assembly is designed specifically with the 36 mm dia tuff jug in mind, it bolts directly into the original clam aperture without body mods*, and utilises the standard filler hose assembly without modification. The deeper alloy elbow on the back of our assembly allows the TUFF JUG nozzle to fully open, allowing greatly improved filling speeds and faster/safer pit stops! This assembly can also be fitted to road going /track day cars as a direct replacement for the Lotus item. Can be supplied with a locking or non locking filler cap. *For fitment to the the S1, holes need to be drilled to accept the mounting ring. This modification is recommended by the LOTRDC to improve safety during the refuelling process by shortening the time spent in the act of refuelling and improving the connection between the refuelling container and the vehicle. Available for S1 Elise/Exige, S2 Elise Exige and the Lotus 211 models Learn MoreRegular Price: £354.00
Special Price Excl. Tax: £250.00 Incl. Tax: £300.00
-
Pro-Alloy Lightweight Exige Intercooler Pipes
Pro-Alloy Lightweight Exige Intercooler Pipes to replace the original heavy cast alloy items fitted as standard, which weigh over 2Kgs with an internal diameter of 57mm and a rough cast internal finish. These Pro-alloy boost pipes are hand crafted and weigh an amazing 705grams, have an internal diameter of 59mm with a smooth internal bore. Not only are they much lighter the extra internal diameter and smooth bore will aid engine breathing. It is also worth remembering that the reduction of almost 1.3 kgs is from high up above the engine!!!! A nice addition to any SC Exige engine bay. Also available in satin black to special order!! Learn MoreExcl. Tax: £209.00 Incl. Tax: £250.80 -
Pro-Alloy Large Capacity Fuel Tank
Pro-Alloy large capacity anti surge fuel tank for all Elise ,Exige and VX220 derivatives Learn MoreExcl. Tax: £759.00 Incl. Tax: £910.80 -
Pro-Alloy Extra Large Capacity Fuel Tank (60 Ltrs)
Pro-Alloy large capacity anti surge fuel tank for all Elise ,Exige and VX220 derivatives Learn MoreExcl. Tax: £794.95 Incl. Tax: £953.94 -
Pro-Alloy Exige V6 Radiator
Pro-Alloy Exige V6 Radiator Learn MoreExcl. Tax: £599.00 Incl. Tax: £718.80 -
Pro-Alloy 211 Alloy Intercooler Boost Pipes
Pro-Alloy 211 Alloy Intercooler Boost Pipes Learn MoreExcl. Tax: £264.00 Incl. Tax: £316.80 -
Powerflex Engine Mount Inserts (Yellow) S2 Toyota
Powerflex engine mount insert kits ( Yellow) S2 Toyota Learn MoreExcl. Tax: £20.95 Incl. Tax: £25.14 -
Powerflex Engine Mount Inserts (Black)S2 Toyota
Powerflex engine mount insert kits (Black) S2 Toyota Learn MoreExcl. Tax: £22.95 Incl. Tax: £27.54 -
Petronas Syntium 3000 AV 5W-40 Engine oil 5Ltrs
Petronas Syntium 3000 AV 5W-40 Engine oil 5Ltrs An approved oil for your Lotus Supplied as 5 litres Learn MoreRegular Price: £39.54
Special Price Excl. Tax: £27.95 Incl. Tax: £33.54
-
Performance Friction Standard Front Brake Pads (2 pot)
Performance Friction Standard Front Brake Pads (2 pot) To fit the standard front caliper on S1 and S2 Elise, Exige, 211, Europa, VX220 etc etc Learn MoreExcl. Tax: £157.95 Incl. Tax: £189.54 -
Performance Friction Rear Brake Pads Exige V6 / Evora
Performance Friction Rear Brake Pads Exige V6 / Evora 08 Compound Learn MoreExcl. Tax: £219.99 Incl. Tax: £263.99 -
Performance Friction Rear Brake Pads Evora 400
Performance Friction Rear Brake Pads Evora 400 08 Compound Learn MoreExcl. Tax: £269.95 Incl. Tax: £323.94 -
Performance Friction Rear Brake Pads Emira
Performance Friction Rear Brake Pads Emira 08 Compound Learn MoreExcl. Tax: £269.95 Incl. Tax: £323.94 -
Performance Friction Front Brake Pads Exige V6 / Evora
Performance Friction Front Brake Pads Exige V6 / Evora 08 Compound Learn MoreExcl. Tax: £269.95 Incl. Tax: £323.94 -
Performance Friction Front Brake Pads Evora BBK
Performance Friction Front Brake Pads Evora BBK Also for the Evora fitted with the Lotus supplied GT4 big brake kit 08 Compound Learn MoreExcl. Tax: £219.99 Incl. Tax: £263.99 -
Performance Friction Front Brake Pads Evora 400
Performance Friction Front Brake Pads Evora 400 08 Compound Learn MoreExcl. Tax: £247.50 Incl. Tax: £297.00 -
Performance Friction Front Brake Pads Emira
Performance Friction Front Brake Pads Emira Learn MoreExcl. Tax: £247.50 Incl. Tax: £297.00