Full Catalogue

A set of bolts for the 4 Dampers or a full Nut and Bolt kit for your suspension. Available as either just the 8 damper mounting bolts or the 14 suspension pivot piont bolts(the other two use the rear toe link joint) . Also available as a full kit. Comes compete with Nyloc nuts and washers where necessary Learn More

Dash Loom Connector/Plug for all models of Elise and Exige. Supplied by the engineers at JSRacing and as used by them on many successful race cars. Designed to allow ease of fitment for any aftermarket dash display or data logger, by allowing the user to connect all the wire from the new dash to the connector whilst still on the bench. Main block connector is a direct fit to the car side loom plug, supplying all the necessary feeds and power required for the functions of the standard dash. Simply connect your new dash display to the new loom as required. Fits all Models of Elise and Exige. For the early S2 Exige and Elise 111R (white dash cars) a secondary connector is also available for the CAN functions Learn More

Duralac corrosion inhibiting compound. Used to reduce corrosion between dissimilar metal contact areas on the Lotus. This will remain liquid if kept sealed tight in it's tin, it will form a skin over the top surface, but liquid underneath. 250ml tin. Learn More

Rear brake caliper for the Elise S1/S2/S3, Exige S1/S2 and VX220 Learn More

These spacers are designed to work with the OEM Air Bag Steering Wheel to bring the steering wheel 30mm closer to the driver. This 30mm spacers fits between the steering wheel and original steering wheel boss. Supplied with four new mounting bolts. MOTORSPORT PARTS. Track use only (Not for road use) Learn More

Elise and Exige Komo-Tec Sports Exhaust for all ZZ/ZR Cars For installation to the following cars Elise (136-220 PS) with 1ZZ & 2ZZ-Toyota-Powertrain from MY 2004-2011, Exige (192-260 PS) with 2ZZ-Toyota-Powertrain from MY 2004-2010, Elise (136-220 PS) with ZR-Toyota-Powertrain from MY 2010-2020. Stainless steel absorption type silencer. Good quality and fit, also for Supercharged cars. Full sound. 2x70mm tailpipes. weight approx. 9.5kg. Learn More

Elise and Exige S1 Fuel Filler Silicone Hose Kit Learn More

Elise and Exige S2 & S3 Fuel Filler Silicone Hose Kit Fits all S2 Models Also fits Elise S3 and Exige V6 up to 2017.5 MY Will not fit cars with the later 48Ltr fuel tanks (2017.5 MY onwards) Learn More

Lotus Elise and Exige S2 Toyota 1ZZ and 2ZZ Uprated Fuel Pump Unit.

IMPORTANT INFORMATION - Please ensure all old fuel is drained and the tank flushed thoroughly. Stale fuel/ dirt / debris will damage the new pump and will invalidate the warranty.

Used the same housing and filters as fitted to the Elise and Exige S2 fitted with a 1ZZ or 2ZZ Toyota engine.

This unit is fitted with an uprated pump that can supply 265ltr/hr when running 2.75 bar of pressure and 13.5Volts or 250Ltr/hr when running at about 3.5 bar of pressure

We can also offer a pump that will deliver over 300Ltr/Hr, please contact us for details Learn More

Komo-Tec ZR250 Kit Performance Data ZR265: approx. 250 hp / 260 Nm Performance Data Series: approx. 220 hp / 250 Nm (factory data) In order to give the new Elise S (2ZR) some additional performance, Komo-Tec have developed this upgrade kit. The new 1.8 S (2ZR engine) differs from the previous 1.8 SC (2ZZ engine) It uses a completely new engine ZR-generation and a supercharger which is now equipped with a water-to-air-cooled charge cooler. With the current 1.8 S, the weak point is now mainly the exhaust system. The original exhaust manifold has very small diameter and the pipe lengths are not optimal. Therefore, Komo-Tec use a 4: 1 stainless steel exhaust manifold with optimized pipe lengths and a 200cpsi HJS sports catalyst. The result is an amazing sporty sound, without being intrusive. To optimize the air-intake as well, a TRD Airbox forms part of the kit. Key Benefits: Increasing Power (+28 hp) and more torque (+10 Nm) ZR250 consisting of: TRD-Sports airbox 4:1 Stainless steel manifold with optimized pipe lengths 200cpsi Sports Catalyst HJS Optimised ECU-Software ZR250 (ignition, injection characteristics and camshaft phase adjustment) It is highly recommended that a sports exhaust (not included!) is used with this power-upgrade. Not all systems that are available on the market fit with this ZR250 Kit! If you have any questions about possible options do not hesitate to contact us for further details. Price includes installation at our workshops in East Yorkshire (NOT AVAILABLE FOR DELIVERY) CAUTION: Kit requires the use of fuel 98 octane (Super Plus) Learn More

Komo-Tec ZR265 Kit Performance Data ZR265: approx. 263 hp / 275 Nm Performance Data Series: approx. 220 hp / 250 Nm (factory data) In order to give the new Elise S (2ZR) even more performance, Komo-Tec have developed the ZR250 kit even further. The new 1.8 S (2ZR engine) differs from the previous 1.8 SC (2ZZ engine) It uses a completely new engine ZR-generation and a supercharger which is now equipped with a water-to-air-cooled charge cooler. With the current 1.8 S, the weak point is now mainly the exhaust system. The original exhaust manifold has very small diameter and the pipe lengths are not optimal. Therefore, Komo-Tec use a 4: 1 stainless steel exhaust manifold with optimized pipe lengths and a 200cpsi HJS sports catalyst. The result is an amazing sporty sound, without being intrusive. To optimize the air-intake as well, a TRD Airbox forms part of the kit. In addition to the ZR250 Komo-Tec increase the supercharger boost-pressure ratio by using another pulley. The required software tuning-file changes the ignition angle, the injection time and the camshaft phase and achieves approx. 263hp power and about 275 Nm torque. The additional torque is clearly noticeable even at lower revs. Key Benefits: Good price-performance-ratio More and earlier torque availability (250Nm at 4.300 rpm) Increasing Power (+43 hp) and more torque (+25 Nm) ZR265 consisting of: K&N Air filter element for standard air box Modified supercharger drive pulley and belt 4:1 Stainless steel manifold with optimized pipe lengths 200cpsi Sports Catalyst HJS Optimization ECU-Software ZR265 (ignition, injection characteristics and camshaft phase adjustment) It is highly recommended that a sports exhaust (not included!) is used with this power-upgrade. Not all systems that are available on the market fit with this ZR265 Kit! If you have any questions about possible options do not hesitate to contact us for further details. Price includes installation at our workshops in East Yorkshire (NOT AVAILABLE FOR DELIVERY) CAUTION: Kit requires the use of fuel 98 octane (Super Plus) Learn More

S1 Wheel nut kit (16) Learn More

Elise S3 17.5MY Forged Rear Wheel - Diamond Cut Rim Edge Will fit ALL Toyota engine 4 cylinder Elise and Exige Rear wheel 7.9kgs 1 x A147G0009F 8X17 et38 Matt Black with Diamond Cut rim These wheels are TPMS compatible Do NOT come with wheel centre caps Learn More

Elise S3 17.5MY Forged Rear Wheel - Graphite Will fit ALL Toyota engine 4 cylinder Elise and Exige Rear wheel 7.9kgs 1 x A120G0154F 8X17 et38 Graphite These wheels are TPMS compatible Do NOT come with wheel centre caps Learn More

Elise S3 17.5MY Forged Rear Wheel - Silver Over Black Will fit ALL Toyota engine 4 cylinder Elise and Exige Rear wheel 7.9kgs 1 x A147G0017F 8X17 et38 Silver Over Black These wheels are TPMS compatible Do NOT come with wheel centre caps Learn More

Elise S3 17.5MY Forged wheels (4) Anthracite Will fit ALL Toyota engine 4 cylinder Elise and Exige Front wheels 5.4 kgs 2 X 6X16 et25 Anthracite Rear wheels 7.9kgs 2 X 8X17 et38 Anthracite These wheels are TPMS compatible Do NOT come with wheel centre caps Learn More

Elise S3 17.5 Model Year forged wheels Will fit ALL Toyota engine 4 cylinder Elise and Exige Front wheels 5.4kgs 2 X A147G0001F 6X16 et25 Matt Black Rear wheels 7.9kgs 2 x A147G0002F 8X17 et38 Matt Black These wheels are TPMS compatible Do NOT come with wheel centre caps Learn More

Elise S3 17.5 Model Year forged wheels Will fit ALL Toyota engine 4 cylinder Elise and Exige Front wheels 5.4 kgs 2 X 6x16 et25 Silver Rear wheels 7.9kgs 2 x 8X17 et38 silver These wheels are TPMS compatible Do NOT come with wheel centre caps Learn More

Elise S3 17.5MY Cast Front Wheel - Black Will fit ALL S2/S3 Elise Front wheel 1 x A120G0054F 5.5 x 16 ET 31 These wheels are TPMS compatible Do NOT come with wheel centre caps Learn More

Elise S3 17.5MY Cast Rear Wheel - High Power Silver Will fit ALL Toyota S2/S3 Elise Front wheel 1 x A120G0053F 7.5 x 17 ET 38 These wheels are NOT TPMS compatible Do NOT come with wheel centre caps Learn More

Elise S3 17.5MY Cast Wheels (4) - Black Will fit ALL S2/S3 Elise Front wheel 2 x B120G0054F 5.5 x 16 ET 31 Rear wheel 2 x B120G0055F 7.5 x 17 ET 38 These wheels are TPMS compatible Do NOT come with wheel centre caps Learn More

A set of 4 NGK Spark plugs for all S3 Elise models with Supercharged 1.8 engine Lotus part number A120E0157F NGK part number ILKAR7G9 Learn More

Elise S3 Cup 250 Forged Front Wheel (Single) A704G0001F 1 Front wheel for the Elise S3 250 CUP (7 x 16 ET 31) Not TPMS compatible DOES NOT COME WITH LOTUS CENTRE CAP/BADGE Centre caps available separately Learn More

Elise S3 Cup 250 Forged rear wheel (Single) Gold 1 Rear wheel for the Elise S3 250 CUP (8x17 et38) Not TPMS compatible DOES NOT COME WITH LOTUS CENTRE CAP/BADGE Centre caps available separately Learn More