Full Catalogue

Elise S3 Cup 250 Forged Wheels Set (4) Black 2 x Front wheel for the Elise S3 250 Cup (7x16 et31) A704G0001F 2 x Rear wheel for the Elise S3 250 CUP (8x17 et38) A704G0002F Not TPMS compatible DOES NOT COME WITH LOTUS CENTRE CAP/BADGE Centre caps available separately Learn More

Elise S3 Forged Rear Wheel Final Edition, diamond cut finish Fits all Toyota 4 cylinder Elise or Exige Rear 8 x 17 ET 38 7.0 Kgs A120G0150F Final Edition, diamond cut finish, with LOTUS machined into the wheel rim DOES NOT INCLUDE LOTUS WHEEL CENTRE CAPS The same wheel as used by Lotus on the Final Edition Elise Lotus centre caps available as an option

Learn More

Elise S3 Komo-Tec Manifold and Sports Catalyst (2ZR) In order to give the 2ZE Toyota engine fitted to the EliseS3 a bit more power, Komo-Tec offer a system consisting of an exhaust manifold and sport catalytic converter. This product has been developed on the test bench with very good results. The manifold is a stainless steel 4:1 with optimized equal length primary pipe lengths. Supplied with a HJS-200cpsi-sports-catalyst. Learn More

Elise,Exige&211 Komo-Tec Manifold and Sports Catalyst (2zz) In order to give the 2ZZ Toyota engine fitted to Elise,Exige and 211 a bit more power, Komo-Tec offer a system consisting of an exhaust manifold and sport catalytic converter. This product has been developed on the test bench with very good results. The manifold is a stainless steel 4:1 with optimized equal length primary pipe lengths as well as the well known stepped bore The target was to get an improved torque curve, especially in the "non-V-Tec" range, and achieve a bit more top-out performance. Supplied with a HJS-200cpsi-sports-catalyst. Learn More

Elise/Exige 2ZZ C64 Komo-Tec Final Drive 5.0:1 2ZZ-Powertrain with C64-Gearbox In order to improve the original fairly long ratio of the final drive of the Elise 111R/Exige S2 and therefore achieve a more dynamic performance, Komo-Tec have developed a new final drive with a ratio of 5,0:1 (Original 4.63:1). The gear ratio is shorter and the agility of the car is improved considerably. Due to the slightly higher tooth clearance it is possible that the gear box is marginally noisier than the original. In order to get these fact better we redeveloped the parts on higher quality standard and get a really nice and well-working result! The gear box has to be dismantled to install these parts. A gear diagram is attached for illustrative purposes. NON STOCKED ITEM - SPECIAL ORDER PART Learn More

Elise/Exige/340R K Series Clutch Slave Cylinder Lotus part number A111Q6006S Learn More

Emira Front Brake Pads Ferodo 2500 The same brake pad material as supplied in these cars from the factory Learn More

Emira Front Brake Pads Pagid RS29 (Yellow) Also know as Pagid 'Yellow' Learn More

Emira RC5+ Carbone Lorraine Front brake pads Learn More

Emira RC5+ Carbone Lorraine Rear Brake pads Learn More

Emira RC6 Carbone Lorraine front brake pads Learn More

Emira RC6 Carbone Lorraine rear brake pads Learn More

Emira Rear Brake Pads Ferodo 2500 The same brake pad material as supplied in these cars from the factory Learn More

Emira Rear Brake Pads Pagid RS29 (Yellow) Also know as Pagid 'Yellow' Learn More

Emira V6 Komo-Tec 430 Kit Performance Data EM430: approx. 429 hp / 450 Nm (IPS: ca. 4xx hp/4xx Nm) Technical Data (Emira V6): approx. 400 hp / 420 Nm (Factory Spec) Performance phase "EM430" consisting of: Optimization of the standard software file DEx430a (Ignition, injection maps and camshaft phase adjustment) KT-Sports Aif filter element OBD-Software download cable CAUTION: Kit requires the use of at least (or higher quality) fuel Super Plus (ROZ98). Kit expires factory warranty to powertrain! Learn More

Phase EM475 Street for the Lotus Emira V6. Emira V6 Komo-Tec 475 Kit (Street) Performance Data EM460: approx. 475 hp / 499 Nm (IPS: ca. 4xx hp/4xx Nm) Technical Data (Emira V6): approx. 400 hp / 420 Nm (Factory Spec) Phase EM475 consisting of: Stainless steel manifold with optimized pipe lengths for TÜV-approval Y-Pipe with special made Catalyst for TÜV-approval KT-Sports air filter element Lambda sensor extension-cables Optimization ECU-Software EM475 (ignition, injection characteristics and camshaft phase adjustment) CAUTION: Kit requires the use of at least (or higher quality) fuel Super Plus (ROZ98). Kit expires factory warranty to powertrain! Learn More

Phase EM475 Street for the Lotus Emira V6. Emira V6 Komo-Tec 475 Kit (Track/Race) Performance Data EM475: approx. 475 hp / 499 Nm (IPS: ca. 4xx hp/4xx Nm) Technical Data (Emira V6): approx. 400 hp / 420 Nm (Factory Spec) After a long test and development phase, we are pleased to be able to offer the first performance phase for the new Emira. In addition to the EM430 phase, we increase the performance to approx. 475PS, which corresponds to 55-60PS more power compared to the production vehicle. The increase in torque is even higher, at around 499Nm, an increase of around 75Nm. In order to achieve this data, in addition to the measures in the EM430 kit (engine control unit equipped with optimized software and a sports air filter insert), we also added a set of stainless steel exhaust manifolds 3:1 with optimized pipe lengths, as well as an optimized downpipe with 200-cell sports catalytic converter. This performance phase cannot be registered due to the combination of manifold and catalytic converter, therefore no TÜV approval! Phase EM460 consisting of: Stainless steel manifold with optimized pipe lengths Y-Pipe with a 200cpsi Sports-Catalyst HJS (Main Catalyst) KT-Sports air filter element Lambda sensor extension-cables Optimization ECU-Software EM475 (ignition, injection characteristics and camshaft phase adjustment) CAUTION: Kit requires the use of at least (or higher quality) fuel Super Plus (ROZ98). Kit expires factory warranty to powertrain! Learn More

20 Black Splined wheel bolts (Long version)and the correct spline tool. Same spec as Lotus part numbers ;- Bolts B117G6000F (Silver bolts) Tools A132G6003F These bolts are 4mm longer than the original bolts, so can be used with a spacer up to 4mm Learn More

20 Black Splined wheel bolts and a splined tool. Learn More

20 Splined wheel bolts and a splined tool. Learn More

Evora 400 Front Brake Pads Ferodo 2500 The same brake pad material as supplied in these cars from the factory Learn More

Evora 400 Front Brake Pads Pagid RS29 (Yellow) Also know as Pagid 'Yellow' Learn More

Evora 400 Rear Brake Pads Ferodo 2500 The same brake pad material as supplied in these cars from the factory Learn More

Evora 400 Rear Brake Pads Pagid RS29 (Yellow) Also know as Pagid 'Yellow' Learn More