Exterior

Bosch 24''Aero Wiper Blade. Direct replacement for all models of Elise, Exige, Europa and VX220 with the 'U' shaped wiper arm end (As per image) Learn More

Bosch 26''Aero Wiper Blade. Longer replacement for all models of Elise, Exige, Europa and VX220 with the 'U' shaped wiper arm end (As per image) Learn More

Clam Top Air Vents A pair of clam top vents as per the Elise 260 Cup and Exige 430 Requires body work skills to install (No instructions supplied) Learn More

Duralac corrosion inhibiting compound. Used to reduce corrosion between dissimilar metal contact areas on the Lotus. This will remain liquid if kept sealed tight in it's tin, it will form a skin over the top surface, but liquid underneath. 250ml tin. Learn More

These spacers are designed to work with the OEM Air Bag Steering Wheel to bring the steering wheel 30mm closer to the driver. This 30mm spacers fits between the steering wheel and original steering wheel boss. Supplied with four new mounting bolts. MOTORSPORT PARTS. Track use only (Not for road use) Learn More

S1 Wheel nut kit (16) Learn More

Evora 400 Series Pollen Filter Lotus part number A132P0156F Learn More

Exige V6 Front Tow Eye, For all cars up to 2018 (Plastic centre grille secured with 4 screws). NOT 400 series cars The later cars use a different tow eye mounting point 80mm diameter eye, 5mm thick aluminium, Powder coated red. Learn More

Exige V6s & 350 Windscreen Washer Pump As fitted to all V6 Exige with the screen wash tank in the front of the car (Pre17.5MY cars and Not 400 series cars with the washer tank in the engine bay) Lotus part number A138B0175F Learn More

Goodridge Stainless Brake Hoses (2) 4 Pot Calipers A pair of replacement Goodridge brake hose with stainless ends and fittings for calipers that use a Banjo style fitting For S2 Exige with 4 pot calipers etc etc.( NOT for V6 Exige or Evora) Learn More

Komo-Tec dB-Eater KT-Track V6 Is your 380/400/410/430 Too loud for the track? The solution: KT-Track dB-Eater-Insert! Easy installation, with tailpipe direction to the left or right (Away from sound meters), the volume is reduced by 1-2db Depending on the track or measuring points in use. Motorsport part - Track use only - NO street use Not for cars with Titanium Silencer or Exige S V6 / Sport 350 with a two-hole tip exhaust... Learn More

GT4 rear spoiler as fitted to the 2010 Lotus Exige. Comes complete with all fittings. Just requires painting the same colour as your car. Photographs show GT4 spoiler fitted to both an Exige and in the correct position on an S2 Elise. yes an Elise, fits the body contour perfectly and misses the engine cover / boot lid easily!!!! . Learn More

Number plate light unit. Fits the following models S2 Elise models 2001 to 2021 S2 Exige 2004 to 2011 2-11 Evora 2009 to 2021 2 required per vehicle Learn More

Number plate light unit for V6 Exige 2 required per vehicle Learn More

Olfi One.Five Black 4K Action Camera - doubles up as a dash camera using a dedicated dashcam mode.

INSIDE THE CARRY CASE:

Olfi® one.five Black 4K Action Camera (x1)
Carry Case(x1)
Lithium-Ion Battery (x1) (Battery Life: Up to 1 ½ hours)
Long and Short 90º Connector (x1)
Long Screw (x1)
Curved 3M Adhesive Base (x1)
1x Flat 3M Adhesive Base (x1)
USB Cable (x1)
30M Waterproof Case (x1)
Frame Housing (x1)
Short Clip (x1)
J Clip (x1)
Short Screws (x2)
Anti-Vibration Plug (x1)
Stickers (x3)
Free 32GB Memory card (Normally £19.99)

IMPORTANT MEMORY CARD INFORMATION: The Olfi one.five requires a 32GB or 64GB Ultra Fast MicroSD Memory Card. Important requirement: Minimum U3 – Must be capable of filming in Ultra High Definition (4K). Please format your card often to clear old files from your card and reduce the risk of data corruption.

Learn More

Pro-Alloy Motorsport Filler Neck Assembly High Quality "Aero" style flush filler assembly for the Lotus S1/ S2 /211 The series 1&2 Lotus Elise and derivatives (including 211 and Exige series 2) with both Toyota and Rover engines have a narrow filler neck due to fuel cap design. The original filler neck is also installed with an unleaded fuel flap. Both these elopements prevent the use of TUFF JUG dry break style fuel filling systems without the use of a narrow adaptor on the dispenser which limits the fuel flow and hinders the seating of the TUFF JUG into the filler neck assembly, increasing the possibility of fuel spillage. The Pro Alloy Motorsport Filler assembly is designed specifically with the 36 mm dia tuff jug in mind, it bolts directly into the original clam aperture without body mods*, and utilises the standard filler hose assembly without modification. The deeper alloy elbow on the back of our assembly allows the TUFF JUG nozzle to fully open, allowing greatly improved filling speeds and faster/safer pit stops! This assembly can also be fitted to road going /track day cars as a direct replacement for the Lotus item. Can be supplied with a locking or non locking filler cap. *For fitment to the the S1, holes need to be drilled to accept the mounting ring. This modification is recommended by the LOTRDC to improve safety during the refuelling process by shortening the time spent in the act of refuelling and improving the connection between the refuelling container and the vehicle. Available for S1 Elise/Exige, S2 Elise Exige and the Lotus 211 models Learn More

Rear diffuser edging strip in Black Sold by the metre (3 metres needed per car) Black Strip equivalent to A122A0029V Learn More