Misc
-
Wishbone Bush Assembly Lubricant
Wishbone Bush Assembly Lubricant P-80 Emulsion is specifically formulated to provide a temporary lubrication for the installation of bushes etc The lubrication properties only work when the lubricant is wet. Learn MoreExcl. Tax: £4.95 Incl. Tax: £5.94 -
Wiper / Washer switch
Wash Wipe Switch As per photograph, a replacement wash wipe column swtich. Fits all models of Elise and Exige. Equivalent to Lotus part number A100M6049F Learn More -
Wheel Arch Liner Clip / Scrivet
Wheel Arch Liner Clip / Scrivet. Learn More -
Vehicle Riser Ramps
Low Rise Vehicle Ramps are a great solution to a problem commonly faced by many Lotus owners and Race teams, They are ideal for use on lowered vehicles and race cars because the Low Rise Vehicle Ramps elevate the car an additional 70mm off the ground, allowing for easier and safer access for trolley jacks The Vehicle Ramps are produced from a durable black Polypropylene (PP) and have a combined weight loading capacity of 5000kg as a pair. The ramps are sold in pairs. Height: 70mm/80mm Width: 200mm Length: 700mm Weight: 4kg (per pair) Loading Capacity: 5000kg (per pair) Learn MoreExcl. Tax: £59.95 Incl. Tax: £71.94 -
V6 Exige and Evora Wheel Stud Kit
V6 Exige and Evora Wheel Stud Conversion Kit Learn MoreExcl. Tax: £99.95 Incl. Tax: £119.94 -
V6 Exige and Evora Wheel Bolt Kit (Not 430/410/380)
20 Splined wheel bolts with a moving washer and the correct spline tool. Learn MoreExcl. Tax: £49.95 Incl. Tax: £59.94 -
V6 Evora,Exige and 430 Cup Wheel Bolt Kit
20 Splined wheel bolts with a moving washer and the correct spline tool. Learn MoreExcl. Tax: £54.95 Incl. Tax: £65.94 -
Tensioner - Seat Runner A142V0001K
Tensioner - Seat Runner A142V0001K Sold as a pair Used to reduce the rocking movement in the drivers seat runners Learn MoreExcl. Tax: £37.95 Incl. Tax: £45.54 -
Steering Wheel Quick Release coupling
Steering Wheel Quick Release coupling Brown and Geeson quick release as used by Lotus an the fabulous Exige V6 Cup cars Utilising a 6x70mm & 6x74mm multi-drilled PCD bolt pattern allows the quick release system to be fitted to all steering wheels with a matching bolt pattern. Learn MoreExcl. Tax: £144.99 Incl. Tax: £173.99 -
Steering Wheel Adaptor (Boss)
Steering Wheel Adaptor (boss) as used on the Exige V6 Cup with a removable steering wheel. Will fit all cars with air bags (Also car with Airbags deleted from steering wheel) Can also be used on non air bag cars, without the need to use the original boss from the steering wheel Learn MoreExcl. Tax: £169.95 Incl. Tax: £203.94 -
Steering Wheel Adapter (Non Air Bag Cars)
Steering Wheel Adaptor (Non Air Bag Cars) Adaptor boss to allow the fitment of quick release couplings and after market steering wheels to non Air Bag cars. Suits quick release couplings with 70mm x 6 PDC fitment Bolts directly to the original steering wheel boss. Learn MoreExcl. Tax: £39.95 Incl. Tax: £47.94 -
Splined Wheel Bolt Tool
Splined Wheel Bolt Tool Fits all cars with splined wheel bolts S2 Rover, S2 Toyota, Evora, V6Exige and Europa Equivalent to Lotus part number A132G6003F Learn MoreExcl. Tax: £5.75 Incl. Tax: £6.90 -
SL Harness bar (Updated design)
SL Harness Bar New updated design, Now also fits cars with factory carbon seats Easy Installation (<1hr) Installs directly to factory threaded mounting points. No removal or cutting of the rear bulkhead trim or seats. Powder-coated black. Fits:- Toyota powered Elise and Exige (S2-S3) V6 Exige S2 Rover cars with short roof Learn MoreExcl. Tax: £179.95 Incl. Tax: £215.94 -
Schroth LOTUS II-FE - 4pt asm (Push Button release) Harness in Black
FIA & ECE Homologated 4-point belt with ASM. 3" shoulder belt, 2" lap belt pull-down Elise (S1, S2, 111R), Exige (S1, S2), 340R Exige V6s,350.410. FE Buckles are road legal and FIA approved. 4pt Harnesses are recommended for use with competition type seats which normally have slots in the seat backs to allow free passage of the harness. Certain high back, integrated headrest seats are not suitable for use with 4pt harnesses. Profi II (2" lap belt) in BLACK 4 point belt with wrap attachment 3” shoulder belts FE road style buckle asm (anti sub) Right hand or Left hand Learn MoreExcl. Tax: £429.95 Incl. Tax: £515.94 -
Schroth LOTUS II- 4pt asm (Twist Buckle release) Harness
FIA Homologated 4-point belt with ASM. 3" shoulder belt, 2" lap belt pull-down Elise (S1, S2, 111R), Exige (S1, S2), 340R Exige V6 etc 4pt Harnesses are recommended for use with competition type seats which normally have slots in the seat backs to allow free passage of the harness. Certain high back, integrated headrest seats are not suitable for use with 4pt harnesses. Profi II (2" lap belt) in BLACK 4 point belt with wrap attachment 3” shoulder belts FE road style buckle ASM (anti sub) Right hand or Left hand SPECIAL ORDER Learn MoreExcl. Tax: £350.95 Incl. Tax: £421.14 -
S2 Wheel Stud Kit
S2 Wheel Stud Conversion Kit Learn MoreExcl. Tax: £89.95 Incl. Tax: £107.94 -
S2 Splined Wheel Bolt Upgrade Kit
16 Splined wheel bolts with a moving washer and a splined tool. Learn MoreExcl. Tax: £42.95 Incl. Tax: £51.54 -
S2 Splined Wheel Bolt Kit (Silver)
16 Splined wheel bolts and a splined tool. Learn MoreExcl. Tax: £21.95 Incl. Tax: £26.34 -
S2 Splined Wheel Bolt Kit (Black)
16 Splined wheel bolts and a splined tool. Learn MoreExcl. Tax: £23.95 Incl. Tax: £28.74 -
S2 Black Splined Wheel Bolt Kit (Long version)
16 Splined wheel bolts and a splined tool. Same spec as Lotus part numbers ;- Bolts B117G6000F (Silver bolts) but 4mm longer Tools A132G6003F These bolts are 4mm longer than the original bolts, so can be used with a spacer up to 4mm Learn MoreExcl. Tax: £27.95 Incl. Tax: £33.54 -
S1 Elise And Exige Fuel Pipe (Pump to Filter)
S1 Elise And Exige Fuel Pipe (Pump to Filter) Direct replacement for the original pipe Comes complete with a new original equipment fuel filter and the correct bulkhead grommet replacement for A111L0038F which is no longer available from Lotus Learn MoreExcl. Tax: £99.95 Incl. Tax: £119.94 -
Removable Steering Wheel Kit (Non Air bag cars)
The kit supplied includes the following parts Momo tuner steering wheel (320mm) B&G Quick release Steering wheel boss adapter for non airbag cars (uses the original steering wheel boss) (Horn ring to be used from original steering wheel) Momo horn push Optional Lotus horn push Early cars not designed with air bags (S1 and early S2 up to about 2007) Learn MoreExcl. Tax: £384.95 Incl. Tax: £461.94 -
Removable steering Wheel Kit (Air bag cars)
The kit supplied includes the following parts Momo tuner steering wheel (320mm) B&G Quick release Steering wheel boss for airbag cars Horn ring for air bag cars Momo horn push Optional Lotus horn push The kit does NOT include an air bag delete, this will need to be sourced by the customer Learn MoreExcl. Tax: £545.95 Incl. Tax: £655.14 -
Rear Diffuser Edging Strip
Rear diffuser edging strip in Black Sold by the metre (3 metres needed per car) Black Strip equivalent to A122A0029V Learn MoreExcl. Tax: £6.50 Incl. Tax: £7.80 -
Pro-Alloy Motorsport Filler Neck Assembly
Pro-Alloy Motorsport Filler Neck Assembly High Quality "Aero" style flush filler assembly for the Lotus S1/ S2 /211 The series 1&2 Lotus Elise and derivatives (including 211 and Exige series 2) with both Toyota and Rover engines have a narrow filler neck due to fuel cap design. The original filler neck is also installed with an unleaded fuel flap. Both these elopements prevent the use of TUFF JUG dry break style fuel filling systems without the use of a narrow adaptor on the dispenser which limits the fuel flow and hinders the seating of the TUFF JUG into the filler neck assembly, increasing the possibility of fuel spillage. The Pro Alloy Motorsport Filler assembly is designed specifically with the 36 mm dia tuff jug in mind, it bolts directly into the original clam aperture without body mods*, and utilises the standard filler hose assembly without modification. The deeper alloy elbow on the back of our assembly allows the TUFF JUG nozzle to fully open, allowing greatly improved filling speeds and faster/safer pit stops! This assembly can also be fitted to road going /track day cars as a direct replacement for the Lotus item. Can be supplied with a locking or non locking filler cap. *For fitment to the the S1, holes need to be drilled to accept the mounting ring. This modification is recommended by the LOTRDC to improve safety during the refuelling process by shortening the time spent in the act of refuelling and improving the connection between the refuelling container and the vehicle. Available for S1 Elise/Exige, S2 Elise Exige and the Lotus 211 models Learn MoreRegular Price: £354.00
Special Price Excl. Tax: £250.00 Incl. Tax: £300.00