Misc

indicator switch Learn More

Komo-Tec dB-Eater KT-Track V6 Is your 380/400/410/430 Too loud for the track? The solution: KT-Track dB-Eater-Insert! Easy installation, with tailpipe direction to the left or right (Away from sound meters), the volume is reduced by 1-2db Depending on the track or measuring points in use. Motorsport part - Track use only - NO street use Not for cars with Titanium Silencer or Exige S V6 / Sport 350 with a two-hole tip exhaust... Learn More

Launch X-431 Euro Tab 3 The Euro Tab III is a newly-developed high-end vehicle diagnostic device. Using the Android 9.0 operating system, the Euro Tab III builds on the highly-regarded Launch diagnostic technology, offering worldwide vehicle coverage, powerful diagnostics and numerous special functions. New for the Euro Tab III is the Smartlink® C VCI. This advanced module allows for communication and advanced functions in several ways. Featuring its own 4.0-inch screen the Smartlink® C communicates directly with a vehicle for local diagnosis, remotely for Launch SRD diagnosis, (Launch Super Remote Diagnosis), the VCI is also compatible with DOIP (Diagnosis over the Internet protocol), CAN FD, (flexible data-rate), and as a Pass-Thru device communicating by J2534, D-PDU and RP1210 protocols. The Smartlink® VCI also supports Truck diagnostics using the optional HD truck software. The new Lotus software includes all Evora, V6 Exige and 2ZR engined cars, with full connectivity for engine management - including spanner light faults - Airbag/SRS, Bosch ABS, automatic gearbox, tyre pressure monitoring and instrument cluster - where supported by the cluster. VX220/Speedster connectivity is currently available via the Vauxhall/Opel brand. The software allows fault code read/clear, live data and special functions - engine histogram read, steering angle recalibration, variant code changes, etc. Earlier model software is in development, and will be automatically released via updates over the internet from the Launch servers. Learn More

LITE↯BLOX Battery Charger Input Voltage: 100 - 240 V, 50 / 60 Hz Primary plug: EURO plug Charging characteristic: CCCV Number of cells/cell-lines: 4 Battery nominal voltage: 12,8 - 13,2V Charging end voltage: 14,4V Max. charging current: 7A > Indication charging > Short-circuit protection > Wrong polarity protection > Over charging protection Learn More

LITE↯BLOX LB20XX Lightweight Battery (New 2022 version) 2022 version now has an alloy mounting frame tp allow fitment to a standard battery tray (optional alloy battery tray saves an addition 1.0 kgs on an Exige V6) NOT AVAILABLE FOR INTERNATIONAL DELIVERY The innovative LITE↯BLOX LB20XX battery is approximately 2.0kg and comes in a thermally and mechanically decoupled CFRP housing with an integrated base plate and intelligent power electronics, controllable via an app - made in Germany:

Features

Saves up to 17kg in weight compared to the comparable series starter battery as fitted to the Exige V6 Plug'n'play exchange & suitable for almost every vehicle wireless interface for status diagnosis via smartphone app Maintenance-free thanks to intelligent electronics with active protection against misuse and overloading caused by: over/under voltage, over/under current, over/under temperature & short circuit Marginal self-discharge when not in use (if switched off via IKOS*) Maximum safety through premium components Proven in professional motorsport (DMSB homologated / FIA F3 certified) Developed and handcrafted in Germany Innovative power electronics for disconnecting via smartphone app in two modes: 1.) IKOS - Intelligent Kill-Operation-Switch: complete disconnection of the LITE↯BLOX from the vehicle in the event of overload or via smartphone (alternative to the disconnect switch for longer downtimes) 2.) AVAT - Active Vehicle Anti Theft (active anti-theft device): all electrical consumers are still supplied with energy when stationary, but as soon as an unauthorized start is made, the LITE↯BLOX permanently disconnects -in the event of an increased load, the power electronics disconnects permanently within milliseconds, so that the power supply for starting is blocked and the engine cannot be started (although this blockage can only be released again by the user via the app).

Application

Motorisation: 4-8 cylinders (2500-4000cc***) suitable for everyday use (vehicle downtime 2-4 weeks*) Performance & motor sports vehicles (sprint, rally, hill climb, track tool, time attack, drag racing, Formula 3 FIA F3) / tuning / caravan, mobile home / car hifi / boat Compatible with intelligent alternator control (IBS / IAC) - training required in advance

Technical specifications

Weight: 20XXg** (including pole terminals) Dimensions: 202 x 123 x 100mm (lxwxh) Voltage: 13.2V / 15.2V (nom / max) Capacity: 12.5Ah / 35-55Ah (nom / Pb-eq ) Discharge current: 250A / 750A* (cont / peak @RT) Operating temperature: -20 to +80°C Service life: 3 to 5x the standard vehicle battery* Connection: plug'n'play via car pole terminals (DIN) or ring cable lugs (M6) Certificates: compliant according to: 2001/95/EG, 2011/65/EU, 2006/66/EG, 2008/104/EU, UN38.3 Scope of delivery: LITE↯BLOX + pole terminals (aluminium) + fastening material + accessories (see figure) Aluminium battery tray available for V6 Exige (As used on all V6 Exige with lightweight battery fitted at the factory) . A special lithium charger MUST be used, a standard charger will damage the battery. App for android is here https://play.google.com/store/apps/details?id=de.liteblox.litebloxreader2 App for IOS is here https://apps.apple.com/de/app/liteblox-remote/id1343292009 Learn More

GT4 rear spoiler as fitted to the 2010 Lotus Exige. Comes complete with all fittings. Just requires painting the same colour as your car. Photographs show GT4 spoiler fitted to both an Exige and in the correct position on an S2 Elise. yes an Elise, fits the body contour perfectly and misses the engine cover / boot lid easily!!!! . Learn More

Magnetic Gearbox Drain Plug (All Toyota models) Fits the gearbox of all Toyota powered models Learn More

Magnetic Sump Plug Fits all Toyota powered models with the following engines 1ZZ, 2ZZ 1ZR,2ZR, also fits Exige and Evora 2GR-FE inc the Evora 400 Learn More

Momo Tuner Steering wheel Learn More

Number plate light unit. Fits the following models S2 Elise models 2001 to 2021 S2 Exige 2004 to 2011 2-11 Evora 2009 to 2021 2 required per vehicle Learn More

Number plate light unit for V6 Exige 2 required per vehicle Learn More

Oil Filter Removal Tool For all Exige and Evora models fitted with the 3.5 V6 2GR-FE engine Also fits Elise 1.6 with the 1ZR engine Must only be used with a 27mm single hex socket - not the 3/8 square drive

Learn More

Olfi One.Five Black 4K Action Camera - doubles up as a dash camera using a dedicated dashcam mode.

INSIDE THE CARRY CASE:

Olfi® one.five Black 4K Action Camera (x1)
Carry Case(x1)
Lithium-Ion Battery (x1) (Battery Life: Up to 1 ½ hours)
Long and Short 90º Connector (x1)
Long Screw (x1)
Curved 3M Adhesive Base (x1)
1x Flat 3M Adhesive Base (x1)
USB Cable (x1)
30M Waterproof Case (x1)
Frame Housing (x1)
Short Clip (x1)
J Clip (x1)
Short Screws (x2)
Anti-Vibration Plug (x1)
Stickers (x3)
Free 32GB Memory card (Normally £19.99)

IMPORTANT MEMORY CARD INFORMATION: The Olfi one.five requires a 32GB or 64GB Ultra Fast MicroSD Memory Card. Important requirement: Minimum U3 – Must be capable of filming in Ultra High Definition (4K). Please format your card often to clear old files from your card and reduce the risk of data corruption.

Learn More

Petronas Syntium 3000 AV 5W-40 Engine oil 5Ltrs An approved oil for your Lotus Supplied as 5 litres Learn More

Pro-Alloy Motorsport Filler Neck Assembly High Quality "Aero" style flush filler assembly for the Lotus S1/ S2 /211 The series 1&2 Lotus Elise and derivatives (including 211 and Exige series 2) with both Toyota and Rover engines have a narrow filler neck due to fuel cap design. The original filler neck is also installed with an unleaded fuel flap. Both these elopements prevent the use of TUFF JUG dry break style fuel filling systems without the use of a narrow adaptor on the dispenser which limits the fuel flow and hinders the seating of the TUFF JUG into the filler neck assembly, increasing the possibility of fuel spillage. The Pro Alloy Motorsport Filler assembly is designed specifically with the 36 mm dia tuff jug in mind, it bolts directly into the original clam aperture without body mods*, and utilises the standard filler hose assembly without modification. The deeper alloy elbow on the back of our assembly allows the TUFF JUG nozzle to fully open, allowing greatly improved filling speeds and faster/safer pit stops! This assembly can also be fitted to road going /track day cars as a direct replacement for the Lotus item. Can be supplied with a locking or non locking filler cap. *For fitment to the the S1, holes need to be drilled to accept the mounting ring. This modification is recommended by the LOTRDC to improve safety during the refuelling process by shortening the time spent in the act of refuelling and improving the connection between the refuelling container and the vehicle. Available for S1 Elise/Exige, S2 Elise Exige and the Lotus 211 models Learn More

Rear diffuser edging strip in Black Sold by the metre (3 metres needed per car) Black Strip equivalent to A122A0029V Learn More

The kit supplied includes the following parts Momo tuner steering wheel (320mm) B&G Quick release Steering wheel boss for airbag cars Horn ring for air bag cars Momo horn push Optional Lotus horn push The kit does NOT include an air bag delete, this will need to be sourced by the customer Learn More

The kit supplied includes the following parts Momo tuner steering wheel (320mm) B&G Quick release Steering wheel boss adapter for non airbag cars (uses the original steering wheel boss) (Horn ring to be used from original steering wheel) Momo horn push Optional Lotus horn push Early cars not designed with air bags (S1 and early S2 up to about 2007) Learn More

S1 Elise And Exige Fuel Pipe (Pump to Filter) Direct replacement for the original pipe Comes complete with a new original equipment fuel filter and the correct bulkhead grommet replacement for A111L0038F which is no longer available from Lotus Learn More

16 Splined wheel bolts and a splined tool. Same spec as Lotus part numbers ;- Bolts B117G6000F (Silver bolts) but 4mm longer Tools A132G6003F These bolts are 4mm longer than the original bolts, so can be used with a spacer up to 4mm Learn More

16 Splined wheel bolts and a splined tool. Learn More

16 Splined wheel bolts and a splined tool. Learn More

16 Splined wheel bolts with a moving washer and a splined tool. Learn More

S2 Wheel Stud Conversion Kit Learn More