1st November 2021. We are open and operating as normal. If in any doubt, please contact us.

Elise/Exige S1

Items 1 to 25 of 44 total

per page

Page:
  1. 1
  2. 2
  • Twin Core 50mm Race Radiator

    All Alloy triple Pass Twin core 50mm Radiator Learn More
    Excl. Tax: £284.95 Incl. Tax: £341.94

  • 295mm Alcon Brake Disc Rota's

    A pair of handed 295mm Alcon brake disc rotas with a mount hole pcd of 177.8mm. These very special handed brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. These brake disc rota's are very light at 4.2kgs each. Even when assembled too fixed bells they are still only 4.9kgs (A standard S2 Lotus disc is 5.9kgs) Learn More
    Excl. Tax: £449.95 Incl. Tax: £539.94

  • AP Racing Brake Bias Valve

    AP Racing Brake Bias Valve Fits into the rear brake line (single circuit) to allow fine adjustemnt of the brake balance. AP Racing part number CP3550-14 Brake proportioning valve

    SPECIAL ORDER ITEM. PLEASE CONTACT US BEFORE ORDERING

    Also available for twin circuit systems, please contact us for details. Learn More
    Excl. Tax: £165.00 Incl. Tax: £198.00

  • Ball Joint (OEM)

    Suspension Ball Joint Ball Joint as fitted to all models and derivatives of Elise and Exige from 1995 onwards. These Ball Joints are as supplied by the OEM Supplier to Lotus and should not be confused with cheap alternatives that are sometimes available. These Joints are specifically produced with the correct dimensions and tolerances for your Lotus. Same as Lotus part number B111C6012F Learn More
    Excl. Tax: £14.95 Incl. Tax: £17.94 As low as: £16.74

  • Brembo Rear Caliper Pin and Spring Kit

    A pair of Rear Caliper retaining Pins and Spring clips 2 x Pins 2 x Springs Parts for both rear calipers Learn More
    Excl. Tax: £20.95 Incl. Tax: £25.14

    Out of stock

  • Clutch master Cylinder For K Series Elise, Exige and 340R A111Q6001F

    Clutch master Cylinder For K Series Elise, Exige and 340R Lotus part number A111Q6001F Learn More

    Regular Price: £107.94

    Special Price Excl. Tax: £74.95 Incl. Tax: £89.94

  • Elise & Exige Rear Caliper

    Rear brake caliper for the Elise S1/S2/S3, Exige S1/S2 and VX220 Learn More
    Excl. Tax: £290.95 Incl. Tax: £349.14

  • Elise and Exige S1 Fuel Filler Silicone Hose Kit

    Elise and Exige S1 Fuel Filler Silicone Hose Kit Learn More

    Regular Price: £119.94

    Special Price Excl. Tax: £92.50 Incl. Tax: £111.00

  • Excl. Tax: £19.95 Incl. Tax: £23.94

  • Ferodo F2500 Front Brake Pads (2 pot)

    Ferodo F2500 Front Brake Pads (2 pot) Learn More
    Excl. Tax: £91.03 Incl. Tax: £109.24

  • Immobiliser Bypass

    Immobiliser Bypass Suitable for all models from the early S1 up to the last of the S2 Elise and Exiges alarm system inc 340R 211 etc etc(up to circa 2009/2010) Learn More
    Excl. Tax: £8.75 Incl. Tax: £10.50

  • K Series GOETZE Cylinder liners

    K Series GOETZE Cylinder liners A set of four cylinderr liners to fit all KSeries engines Learn More
    Excl. Tax: £143.95 Incl. Tax: £172.74

  • K Series Oil Pump

    K Series Oil Pump This pump uses 12.0mm wide internal pump gears. Learn More
    Excl. Tax: £87.50 Incl. Tax: £105.00

  • K Series Oil Rail Ladder

    K Series Oil Rail Ladder The latest improved design of Oil Rail for the ‘K’ series engine. Land Rover/ Rover advise the use of the latest cylinder head stretch bolts and the new multi layer head gasket in combination with this oil ladder. Learn More
    Excl. Tax: £36.95 Incl. Tax: £44.34

    Out of stock

  • Lambda Sensor S1 Elise, Exige & 340R

    Lambda Sensor This high quality Bosch Lambda sensor should not be confused with the cheap alternatives that are available! These Bosch Lambda Sensors are as supplied by Lotus and is the same as Lotus part number A111E6059S Learn More
    Excl. Tax: £64.95 Incl. Tax: £77.94

  • Excl. Tax: £29.95 Incl. Tax: £35.94

  • Mintex 1230 Brake Pads (Road Use)

    Mintex M1230 brake pads (road use). ECE R90 approved. Front and Rear brake pads manufactured by Mintex, a well respected OEM supplier of automotive parts. These brake pads are a very cost effective heavy duty replacement for standard cars which are used on the road. Mintex material works well from cold and offers a cost effective repacement for the standard brake pads of any Elise, Exige or VX220. These brake pads are NOT a competition/track pad (the M1144 ones are). Note: Picture shows 1144 pads but they are identical apart from the friction material. Learn More
    Excl. Tax: £28.95 Incl. Tax: £34.74

  • Momo Tuner Steering wheel

    Momo Tuner Steering wheel Learn More
    Excl. Tax: £179.95 Incl. Tax: £215.94

  • Motorsport Filler Neck Assembly (Pro-Alloy)

    Motorsport Filler Neck Assembly (Pro Alloy) High Quality "Aero" style flush filler assembley for the Lotus S1/ S2 /211 The series 1&2 Lotus Elise and derivatives (including 211 and Exige series 2) with both Toyota and Rover engines have a narrow filler neck due to fuel cap design. The original filler neck is also installed with an unleaded fuel flap. Both these elopements prevent the use of TUFF JUG dry break style fuel filling systems without the use of a narrow adaptor on the dispenser which limits the fuel flow and hinders the seating of the TUFF JUG into the filler neck assembly, increasing the possibility of fuel spillage. The Pro Alloy Motorsport Filler assembly is designed specifically with the 36 mm dia tuff jug in mind, it bolts directly into the original clam aperture without body mods*, and utilises the standard filler hose assembly without modification. The deeper alloy elbow on the back of our assembly allows the TUFF JUG nozzle to fully open, allowing greatly improved filling speeds and faster/safer pit stops! This assembly can also be fitted to road going /track day cars as a direct replacement for the Lotus item. Can be supplied with a locking or non locking filler cap. *For fitment to the the S1, holes need to be drilled to accept the mounting ring. This modification is recommended by the LOTRDC to improve safety during the refuelling process by shortening the time spent in the act of refuelling and improving the connection between the refuelling container and the vehicle. Available for S1 Elise/Exige, S2 Elise Exige and the Lotus 211 models Learn More
    Excl. Tax: £226.00 Incl. Tax: £271.20

  • Nitron Springs

    Replacement Nitron Springs Priced individually If the length and spring rate you require is not listed please contact us Learn More
    Excl. Tax: £68.00 Incl. Tax: £81.60

  • Nitron Wishbone Inner Bearing Kit (Replacement Bearings)

    Replacement inner bearing for the Nitron inner bearing kit Learn More
    Excl. Tax: £17.95 Incl. Tax: £21.54 As low as: £17.10

  • Pagid Brake Discs S1

    Pagid Brake Discs S1 A pair of 282mm steel brake discs made by OEM manufacturer Pagid Learn More
    Excl. Tax: £79.95 Incl. Tax: £95.94

  • Pagid RS14 (Black) Brake Pads (Standard Calipers)

    Pagid RS14 (Black) Brake Pads (Standard Calipers) Pagid Black is an ideal trackday / race pad, with good initial bite, excellant modulation and good fade resistance. Learn More
    Excl. Tax: £168.95 Incl. Tax: £202.74

  • Performance Friction Brake Pads Lotus Motorsport Caliper(4 pot)

    Performance Friction Brake Pads Lotus Motorsport Caliper To fit the 4 pot caliper as fitted/used by Lotus on the S1 motorsport cars (4 Pot calipers) 01 Compound Learn More
    Excl. Tax: £139.95 Incl. Tax: £167.94

  • Performance Friction Standard Front Brake Pads (2 pot)

    Performance Friction Standard Front Brake Pads (2 pot) To fit the standard front caliper on S1 and S2 Elise, Exige, 211, Europa, VX220 etc etc Learn More
    Excl. Tax: £148.95 Incl. Tax: £178.74

Items 1 to 25 of 44 total

per page

Page:
  1. 1
  2. 2