Exige S3 (V6)

Exige V6 343mm Alcon Front disc with Floating Bells These floating 343mm brake discs are a direct replacement for the standard 332mm front disc on the Exige V6. Each fit contains the following parts 2 x 343 x 32mm Alcon discs 2 x Floating bells 24 x titanium drive bobbins 24 x nut/bolt fittings 12 x disc anti rattle clips. 4 x caliper spacers The anti rattle clips stop the 'clatter' usually found with floating bells Priced and sold as a pair of discs Learn More

Exige V6 343mm Big Brake Kit Consisting of :- 2 x 343mm x 32mm Front brake disc rota's 2 x Floating bell kits (Front) Including titanium bobbins, anti-rattle clips, nuts and bolts 2 x 343mm x 26mm Rear brake disc rota's 2 x Rear brake bells including nuts and bolts 4 x stainless caliper spacers 2 sets of brake pads. (Same pads front and rear) The standard brake pads offered in this kit are the Ferodo 2500, optionally Performance friction pads are also available (see options below) The front discs are assembled with fully floating bells and are also fitted with anti rattle clips. It is our opinion that discs this large size should be installed with floating bells, To stop the noises usually associated with floating bells we supply the kit with the anti-rattle clips shown. The standard car uses slightly smaller brake pads in the rear, this kit uses the larger front brake pads in both the front and the rear!! Unlike some of the kits available that use the smaller rear pads in the both the front and rear Special attention to wheel weigh position is required on the front wheels with this brake kit Learn More

A pair of Alcon 343mm brakes discs with separate bell / hand brake bell for the superb Exige V6. (Will fit all V6 Exige models) These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the rear of the Cup and LF1 models The bell is also produced by Alcon and is Zylan coated for corrosion protection One Lotus supplied two piece rear disc is currently £822.89 + vat.....(Almost £1975.00 per pair) Due to the larger disc area these should be used with the larger front brake pads (They will work with standard size rear pads but this is not recommended) Learn More

A pair of handed 343mm X 32mm Alcon Front brake disc rotas with a mounting holes to suit the Exige V6 with alloy bells. These very special Upgraded brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the front brake bells supplied by Lotus on the V6 Exige with alloy belled discs Supplied as a pair of discs (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota Learn More

A pair of handed 343mm Alcon Rear brake disc rotas with a mounting holes to suit the Exige V6 with 2 piece rear discs These very special Upgraded Big brake rota's are currently only available from us! The special 'C' shaped groove gives all the benifits of a conventional 'accross the disc' groove, But leaves more of the disc surface available for the brake pads to use. Will bolt directly to the reart brake bells supplied by Lotus on the V6 Exige with 2 piece discs Supplied as a pair of disc rota's (No bells) (Lotus supplied discs are only available from lotus as a complete disc / bell unit and are over £1350 + vat per pair!!) Direct replacement for the Lotus supplied disc rota These new rear discs have a larger swept area than the standard disc and use the Exige and Evora front brake pad Learn More

Exige 390/410/420/430 Auxiliary cooling radiator Also used on Exige 350 sport from 2018 onwards (Fits to right side of car) Lotus part number B138K0208F Learn More

Exige 390/410/420/430 Charge cooler radiator (Fits to left side of car) Lotus part number B138K0209F Learn More

Exige V6 410/430 Evora Komo-Tec Stainless Steel Sports Exhaust (switchable) High Quality stainless steel switchable exhaust silencer for Exige and Evora 400 series cars. This silencer achieves a sporty and crisp sound and less weight than the original. The overall aim was to create a sports silencer which achieved three targets: Less weight than standard (15.9kg standard/13.2kg Komo-Tec) A significant difference in sound between open and closed exhaust flap. No power loss between open/closed exhaust flap. During testing on the dyno Komo-Tec found that some products on the market have significant differences in power output with the flap in the open or closed position. This system produces the same power whether the valve is open OR closed. The silencer is a direct 1-to-1 replacement for the original/standard part. The original switch control for the exhaust continues to work as normal. The tailpipes have a diameter of 85mm and a perforated inner tube. Two exhaust tip styles are available Stainless tailpipes or a carbon-version. (See images) Learn More

Exige V6 Air Conditioning Condenser 2016 onwards A138K0077H Learn More

A pair of Alcon 332mm brakes discs with separate bell / hand brake bell for the superb Exige V6. (Will fit all V6 Exige models) These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the rear of the Cup and LF1 models The bell is also produced by Alcon and is Xylan coated for corrosion protection One Lotus supplied two piece rear disc is currently £822.89 + vat.....(Almost £1975.00 per pair) Learn More

A pair of Alcon 332mm brakes discs and anodised alloy bells to fit the Exige V6. These high grade discs are a direct replacement for both the standard one piece disc and also the two piece disc as fitted to the Cup, LF1, 410 and 430 models (A pair of two piece discs from lotus are over £1695 + vat!!!!) Learn More

Exige V6 Exige V6 Cup and 3-Eleven Toe link Kit (upgrade) Supplied as a car kit (two sides) Designed to last the life of the car the new Spitfire Exige V6 (All variants) toe link kit is stiffer, lighter, and ultimately stronger than the OE setup. The custom designed bearings are fitted with aerospace specification Teflon liners for long term reliability and performance. The fine pitched threads of the new components allow easy and accurate toe setting. Please Note: The kit replaces the inner arm sections and adjuster mechanisms on both sides of the vehicle with the exception of the Y shaped aluminum saddle – if you need this outer Y shaped component please contact us. The inner section of the standard OE links is a heavy cast steel bearing arm with a press-in generic plastic lined bearing, these are linked to the outer aluminium bearing saddle with an M12 threaded adjuster, the necessary small section of the adjuster required to fit the arms is a known weak point of the OE toe link. Learn More

Aluminium baffled sump for the Exige V6 and Evora Supplied with hardware fittings (Bolts) Boss fitted to take oil temp sensor 1/8 NPT (Blanking plug supplied in hardware) Multi directional baffles for improved oil control. ( as seen in the Lotus baffled sumps) Easy installation with all fixing being accessible from outside the sump. Learn More

Exige V6 and Evora S1 Front Brake Pads Ferodo 2500 The same brake pad material as supplied in these cars from the factory (Not cup cars) Lotus equivalent part number A132J0001S Latest Lotus price £152.89 + VAT Learn More

Exige V6 and Evora OE Oil Filter (Toyota) Complete with special filter drain tool and O rings Lotus part number A132E6399S Lotus price £26.90..... Learn More

Exige V6 and Evora Oil Cooler Radiator A138K0002F Learn More

Exige V6 and Evora RC5+ Carbone Lorraine Front Brake pads (Not Evora 400) Learn More

Exige V6 and Evora RC5+ Carbone Lorraine Rear Brake pads (Not Evora 400) Learn More

Exige V6 and Evora RC6 Carbone Lorraine Front Brake pads (Not Evora 400) Learn More

Exige V6 and Evora RC6 Carbone Lorraine Rear Brake pads (Not Evora 400) P Learn More

Exige V6 and Evora Rear Brake Discs (curved vane one piece) 2 x 332mm x 26mm Drilled with curved vanes Fits Evora and Exige V6 rear NOT Evora 400 Supplied as a pair of discs Learn More

Exige V6 and Evora S1 Rear Brake Pads Ferodo 2500 The same brake pad material as supplied in these cars from the factory (Not cup cars) These rear brake pads are the correct shape as supplied by Ferodo, They are not cut down front brake pads!!! Lotus equivalent part number A132J0002S Latest Lotus price £152.89 Learn More

Exige V6 and Evora Rear Brake Pads Pagid RS29 Also know as Pagid 'Yellow' Learn More

Exige V6 and Evora S Front Brake Pads Pagid RS29 NOT Evora 400 Front Also know as Pagid 'Yellow' Learn More