VX220 and Europa

308mm one piece S2 Brake discs. These 308mm brake discs have curved vanes which are handed left and right to ensure balanced cooling accross both sides of the car, unlike the original 288mm discs which use one casting and have curved vanes all in the same direction. This leads to one side of the cars brakes being cooled better than the other!!! Many of the aftermarket discs that are available also use one casting with vanes which are in one direction only! Then they have grooves or holes put onto the disc to make them handed. These discs use handed castings and should not be confused with other products on the market. These discs are as used on the Europa SE and 2010 Exige with the factory fitted fast road brake kit!! Could be used as part of a front brake upgrade on a standard S2 VX220 or Europa, using the standard 2 pot calipers, spacers and the correct length caliper retaining bolts Diameter = 308mm Thickness = 26mm Braking surface = Drilled Disc type = Vented Vanes = Curved, handed left and right Learn More

42mm high pressure all aluminium radiator for Elise, 4 cylinder Exige, VX220, Europa Learn More

Suspension Ball Joint Ball Joint as fitted to all models and derivatives of Elise and Exige from 1995 onwards. These Ball Joints are as supplied by the OEM Supplier to Lotus and should not be confused with cheap alternatives that are sometimes available. These Joints are specifically produced with the correct dimensions and tolerances for your Lotus. Same as Lotus part number B111C6012F Learn More

Bracket-Damper/ABS Unit RH C116C0010F Learn More

Brake Light Switch ( All cars with Electronic Throttle) These are the original equipment switch as supplied by Lotus Lotus part number A116J6034F Fits 2-11, 3Eleven, Exige V6 (All models), Evora (All Models inc 400 series), Elise S2 and S3, Exige S2 Learn More

A pair of Rear Caliper retaining Pins and Spring clips 2 x Pins 2 x Springs Parts for both rear calipers Learn More

Caliper Bleed Screw - all Lotus 4 piston AP calipers 2 Caliper bleed screws (Bleed nipples) M10 X 1.0 X 30mm, suits all S2 Elise/Exige with the Lotus AP 4 piston caliper fitted to the front, all Evora's, all V6 Exige's and 3-11's One kit comprises 2 bleed screws, seals and caps. Learn More

Carbone Lorraine RC5+ Brake Pads for Elise,Exige and VX220 using standard brake calipers The RC5+ compound is Carbone Lorraine's newest and most advanced brake pad material to date and leads the way in braking technology. Carbone Lorraine RC5+ brake pads excel as a trackday or race pad. The low wear rate on these brake pads means they are perfect for endurance races and are gentle on both OEM and uprated brake discs. The Carbone Lorraine RC5+ brake pad is made from Sintered Metal and supersedes the old Carbone Lorraine RC5 brake pad compound, improving the brake pad in every area. The new Carbone Lorraine RC5+ brake pad compound is designed to give virtually no dust and is very quiet, eliminating brake squeal usually associated with race brake pads. This RC5+ brake pad material has a higher friction co-efficient, but lower wear rate than the discontinued RC5 brake pad compound. RC5+ compound brake pads; like the rest of the Carbone Lorraine range, do not contain any organic compounds. This unique material does not melt or compress when under pressure and high temperature giving a firmer pedal and better brake modulation. The Carbone Lorraine RC5+ brake pad compound has an average friction co-efficient between the old RC5 (μ=0.40) and the RC6 (μ=0.5) and are very effective from cold, giving excellent initial bite yet will still not deteriorate with braking temperatures until well over 1000 °C – well above the temperatures found under race conditions. Learn More

Carbone Lorraine RC5+ Brake Pads for Elise,Exige and VX220 using AP Racing / Lotus four pot calipers. The pads are retained using two pad pins in each caliper. These brake pads are for the 4 pot calipers as fitted to the 2008-2010 cars with factory fit big brakes, with pads retained by two push fit pins. These pads are 14.5 thick For calipers using brackets with pads secured by a single cross bolt please contact us. Learn More

Carbone Lorraine RC6 Brake Pads for Elise,Exige and VX220 using AP Racing / Lotus four pot calipers.( BBK) The pads are retained using two pad pins in each caliper. These brake pads are for the 4 pot calipers as fitted to the 2008-2010 cars with factory fit big brakes. The pads are retained by two push fit pins. These pads are 14.5mm For calipers using brackets with pads secured by a single cross bolt please contact us. Learn More

Carbone Lorraine RC6 Brake Pads for Elise,Exige and VX220 using standard brake calipers The RC6 compound is Carbone Lorraine's next level up from the fabulous RC5+ Brake pad, one of the most advanced brake pad material to date and leads the way in braking technology. Learn More

Duralac corrosion inhibiting compound. Used to reduce corrosion between dissimilar metal contact areas on the Lotus. This will remain liquid if kept sealed tight in it's tin, it will form a skin over the top surface, but liquid underneath. 250ml tin. Learn More

Rear brake caliper for the Elise S1/S2/S3, Exige S1/S2 and VX220 Learn More

These spacers are designed to work with the OEM Air Bag Steering Wheel to bring the steering wheel 30mm closer to the driver. This 30mm spacers fits between the steering wheel and original steering wheel boss. Supplied with four new mounting bolts. MOTORSPORT PARTS. Track use only (Not for road use) Learn More

20 Black Splined wheel bolts (Long version)and the correct spline tool. Same spec as Lotus part numbers ;- Bolts B117G6000F (Silver bolts) Tools A132G6003F These bolts are 4mm longer than the original bolts, so can be used with a spacer up to 4mm Learn More

20 Black Splined wheel bolts and a splined tool. Learn More

20 Splined wheel bolts and a splined tool. Learn More

Handbrake cable all S2/S3/VX220 4 Cylinder cars Lotus part number A120J0039F Learn More

Harness Hardware kit (allows Schroth and standard belts to be fitted) Kit of spacers, washers and a stud to allow the fitment of Schroth harnesses to your lotus whilst keeping the standard inertia belts For pre 17.5 MY cars Learn More

Horn Contact Ring As used on all Elise, Exige variants before 2007 (non airbag type cars) Lotus part number A111H6008F Learn More

Lotus S1 Front AP 2 Piston Caliper Piston Price is for a single 2 piston caliper piston, 2 required per caliper. Specific piston for S1 Elise front caliper fitted with the anti push back spring Learn More

Lotus S2 onwards/VX220 Front AP 2 Piston Caliper Piston Price is for a single 2 piston caliper piston, 2 required per caliper. Fits all 2 piston AP front calipers from S2 K series cars onwards Learn More

Lotus/VX220/ Front 2 Piston Caliper Seal Kit Set of 4 seals for a single caliper. To replace seals in both calipers will require 2 kits. Learn More

Front brake pads manufactured by Mintex, a well respected OEM supplier of automotive parts. These brake pads are a very cost effective replacement for standard cars which are used on the road as well as on the circuit. Mintex 1144 material works well from cold and offers a good first upgrade to the brakes of any Elise, Exige or VX220. For all S1,S2,S3 Elise and S1,S2 Exige with standard 2 pot front calipers (Not for 4 pot AP Racing calipers) Learn More