Suspension

Steering Arm / Upper plinth Bolt Kit. On the S2 Elise and Exige, Lotus upgraded the bolts that are used in the Steering arms on the front suspension and the Top Ball Joint Plinths on the rear suspension from 8.8 to 10.9. This kit of 10.9 cap head bolts are a must for anyone driving there S2 on the circuit. (The S1 cars with alloy uprights use 8.8 grade bolts for the steering arms and top ball joints) 4 bolts for the two front steering arms 4 bolts for the two rear top ball joint plinths Learn More

A suspension refresh kit consisting of 1x full set of Seriously Lotus wishbone bushes or Superpro bushes. Also available with an upgrade to Nitron inner bearings., 8x Suspension Ball Joints 2x Track Rod Ends (S1 or S2 = OEM) 2x Our own Antiroll bar drop links 1x Suspension bolt kit including damper bolts. All the main components required to carry out a suspension refresh. Learn More

Full or part Nut and Bolt kits for your suspension. Available as either just the 14 suspension pivot piont bolts (the other two use the rear toe link joint) or the 8 damper mounting bolts. Also available as a full kit. Each kit has one nyloc nut and two washers for each bolt. Learn More

V6 Exige Rear Anti Roll Bar Drop Link The rear drop inks on the V6 Exige are different right and left. Please specify which one is required from the options to the left A132D4009F/A132D4010F Plus option to add 2 locknuts per drop link - these tend to be seized and need to be cut off Learn More

VX220 Toe Link Kit (Earlier Cars With Parallel Uprights) Learn More

VX220 Toe Link Kit (Tapered Uprights) Learn More